Test Indicators - Page 18

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: 3m Brand: 3M

Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas / vapor respirator with a particulate filter. For use with 3M Qualitative Fit Test Apparatus FT-30

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-504T Color: White

Mitutoyo Pocket Test Indicator Set, Graduations: .0001", Range: .010", Dial Face: 0-5-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, 2 holding bars.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...

Manufacturer: T&O Brand: Toto

(6) Analog resolutions and automatic switch-over. Absolute and incremental measurement conversion. Direct metric/inch conversion. Tolerance set (permitting classification measurement). Origin data recall for absolute measurement. RS232 data output.

Manufacturer: TECLOCK Brand: TECLOCK

Contact point is hardened ground and chrome plated. Lug back with 1/4" hole is integral with the case. Revolution counter included on indicators.Specifications:"Dial Reading 0-100 Indicator Range .001"" Dial Color Black Graduation 2"" Dial Diameter 2"

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe Model: 599-7031-5

Brown & Sharpe BesTest 599-7031-5 .0005" .030" Dial Test Indicator - Brand New

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-442T-06 Color: Black

The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (0.039", 0.079", and 0.118" diameter), a 4mm diameter stem, two stems (0.157" and 3/8" diameter), a knurled clamp ring, a swivel clamp, a 4 inch holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial i...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-442T Color: White

The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (0.039", 0.079", and 0.118" diameter), a 4mm diameter stem, two stems (0.157" and 3/8" diameter), a knurled clamp ring, a swivel clamp, a 4 inch holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial i...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...