Test Indicators - Page 19

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-402TCAL

The calibrated Mitutoyo 513-402TCAL test indicator set is for measuring small surface variations in narrow or recessed areas. The test indicator has a measurement range of 0 to 0.03", graduations of 0.0005", and an accuracy of + or – 0.0005". This model has a white dial face with contrasting hand, and glare-free, scratch-resistant crystal. It is tilted 20 degrees for readability and displays in inches. This test indicator has an anti-magnetic pointer and contact point for reliable measurements in magnetized environments. The contact point is carbide for durability. This test indicator has no clutch to enable automatic reversal of measuring direction, and jeweled bearings for sensitivity and quick response. The one-piece bezel and O-ring seal help resist water and oil. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.The measuring force for this test indicator is 5 to 10 Newtons (N). The balanced dial has a reading of 0-15-0. This full kit contains the base indicator and stylus, two extra styluses, two stems, a knurled clamp ring, a swivel clamp, and an inch holding bar. The set comes in a fitted plastic case.SpecificationsRange0 to 0.03"Graduations0.0005"Accuracy+ or - 0.0005"Measuring force0.3N or lessDial readingBalanced, 0-15-0FaceDial, glare- and scratch-resistant crystal, 20-degree tiltStemAnti-magnetic, carbide tippedBodyNo clutch (auto-reverse), jeweled bearings, one-piece bezel and O-ring sealDimensions56.5mm body length (without stylus); 40mm dial diameterWeight0.55lb.Test indicator gauges, also called gages, are precision instruments that measure ...

Manufacturer: ASIMETO Brand: ASIMETO Model: 504-81-5

Assorted Measuring, Extended Range Dial Test Indicator, ASIMETO, Description Dial Test

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-444E Color: Yellow

The Mitutoyo 513 series dial test indicator has a tilted face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicato...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-443T-06 Color: Black

The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (0.039", 0.079", and 0.118" diameter), a 4mm diameter stem, two stems (0.157" and 3/8" diameter), a knurled clamp ring, a swivel clamp, a 4 inch holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial i...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Lever-type dial test indicators are especially intended for use on the shop floor or in the inspection room - Ideally suited for comparative measurements on a surface plate, for instance - Determine form, shape and position deviations as well as axial and runout errors. Monobloc housing with 3 countersunk dovetail attachments. Well-proven dial test indicators with dial face mounted parallel to the insert's axis. Tesa design swiss made. Standard: DIN 2270 NF E 11-053. Rotating dial. Movement with patented shock proof system. Lever system with friction drive to prevent overload. Supplied in a plastic case along with: 1 Insert with a 2mm diameter, 1 Wrench and 1 Mounting rod with a 8mm diameter. Identification number. Declaration of conformity. 38mm Dial diameter. 12.53mm Insert.

Manufacturer: Reid Supply Company Brand: RSC

For use in a wide number of applications from inspection to machine tool set up. Sturdy zinc die cast housing with a high quality industrial magnet. Measures only 4-1/2 x 1 x 1-1/2 with 45 lbs. of holding power. Allows for many mounting options; three 1/4-20 tapped holes, one 10-32 tapped hole, one 3/8 reamed hole. Also has a V-shaped hole in the back so rods or accessories from 1/8 to 5/16 can be affixed.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, TESA carbide contact point has an M1.6 thread size, and is designed for use with Interapid series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, TESA carbide contact point has an M1.6 thread size, and is designed for use with Interapid series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, TESA carbide contact point has an M1.6 thread size, and is designed for use with Interapid series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, TESA carbide contact point has an M1.6 thread size, and is designed for use with Interapid series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.