Test Indicators - Page 2

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, ruby tip contact point has an M1.4x0.3 thread size, and is designed for use with Bestest series dial test indicators. Ruby-tip contact points are lightweight, wear-resistant, stable with changes in temperature, and are suitable for delicate and silicon carbide surfaces. Non-magnetic and non-conductive properties make it suitable for electrical discharge machining (EDM) processes.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, ruby tip contact point has an M1.4x0.3 thread size, and is designed for use with Bestest series dial test indicators. Ruby-tip contact points are lightweight, wear-resistant, stable with changes in temperature, and are suitable for delicate and silicon carbide surfaces. Non-magnetic and non-conductive properties make it suitable for electrical discharge machining (EDM) processes.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Fowler Brand: Fowler & Nsk Model: FOW72-520-110

Dial Indicator

Manufacturer: S&G Tool Aid Brand: S&G Tool Aid Model: 33650

SG33650 Features: -Top dead center indicator. -To accurately set any piston to top dead center in deep spark plug hole applications. Dimensions: Overall Product Weight: -0.34 Pounds.

Manufacturer: INTERAPID Brand: Brown & Sharpe

One piece, solid case. Very high sensitivity, very light measuring pressure. Jeweled mechanism fitted with ball bearings. Variety of mounting positions.

Manufacturer: Starrett Brand: Starrett Model: PT22430

No. PT22430 this unit consists of a snug (No. PT18724) with two 4" long rods, one a 1/4" diameter, the other a 3/8" diameter. It is generally used with an indicator attached to No. PT22428 swivel post snug which slides onto the 1/4" diameter rod. The 3/8" rod will fit into the Nos. 252 and 657H gauge holders. It also has the ability to be held in chucks and adjusted to a wide range of heights and diameters.

Manufacturer: Indicator/Base Sets Brand: Indicator/Base Sets

Solid 45 lb. Magnet (always on). 1" x 1 1/4" x 4 1/2". Mounts in 6 positions. Base is made in USA. This set also includes VDI-2 0-1", .001" graduation, dial indicator.

Manufacturer: LittleMachineShop.com Brand: LittleMachineShop.com Model: LMS2029

This magnetic base is the perfect size for mini lathes and mini mills. It accepts dial indicators with 3/8" stems and dial test indicators with dovetails.

Manufacturer: Starrett Brand: Starrett Model: PT23942

The Starrett ball-shaped, carbide contact point has 1-64 thread size, and is designed for use with Starrett 708 and 709 series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: PT23914

The Starrett ball-shaped, carbide contact point has 1-64 thread size, and is designed for use with Starrett 708 and 709 series inch dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.