|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $164.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $165.00 22% OFF
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4308970
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4308970
Mahr Federal 801 SGM MarTest 4308970, 0.0001" x ±0.004" Standard Test Indicator, 0-4-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $166.04 23% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-412T
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-412T
Mitutoyo Horizontal Test Indicator Set, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar, Comment: Long point.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $169.00 6% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-425E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-425E
Color: Yellow
|
The Mitutoyo 513 series dial test indicator has a white or yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The horizontal face is parallel to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, a yellow face that meets ANSI standards for metric indicators or white face, and double scale that is numbered both clockwise and counter-clockwise for reading in both directions.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking ...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $172.00 2% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 711MFSZ
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 711MFSZ
Color: White
|
The Starrett Series 711M Last Word dial test indicator has a balanced dial, a swiveling body, and metric measurements. The horizontal-face dial test indicator has a hard, chrome-plated, steel ratchet contact point for taking precise measurements in machining, layout, and inspection work. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. It has a balanced dial and a white face with half-yellow shading for accurate reading when used with a mirror or in a bore jig application. The positive reversing switch changes the reading direction. The indicator has a swiveling tubular body that can be mounted from the top or the body of the indicator using a body clamp, friction holder, or shank. The indicator has a jeweled lever action for smooth operation, and a replaceable contact point. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). This indicator includes a body clamp and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checkin...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $175.00 19% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-908
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-908
Color: Yellow
Indicator, Knurled Clamp Ring, ø8mm Stem (part number 902804), ø2mm Carbide Contact Point and Mini Magnetic Stand.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $178.00 29% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 196A1Z
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 196A1Z
Color: White
|
The Starrett 196 series universal dial indicator has a 0 to 0.2" measuring range with 0.001" graduations for precise measurement of the rise or drop in a work piece. It has a 0 to 100 counter with one revolution equivalent to 0.1", and the white-face dial has a scratch-resistant crystal face for ease of reading. The plunger on the back of the dial comes with 1/2", 5/16", and 1/8" diameter contact points. The dial indicator has a 1/4" diameter stainless-steel shank for mounting. Some dial indicator sets include an adapter, a standard letter of certification, and clamp, tool post holder, snug, and hole attachments. The dial indicator is suitable for applications such as quality control for machined parts.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $183.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $186.95 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-443-06
Color: Black
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-443-06
Color: Black
|
The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 0.079" carbide contact point, a 3/8" diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very simi...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $190.41 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
|
The Brown & Sharpe TESA Compac series lever dial test indicator has a white face, a 4mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the white dial and contrasting black hand help make measurements easy to read. The compact, carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion. The ball-bearing lever system swivels through to 210 degrees. The dial face mounted at the top of the indicator parallel to the axis, and two universal dovetail mounts can be used for mounting from the top or back. Dovetail mounts provide a rigid setup. This indicator is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, includes a serial number, and an inspection report with a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, two 15mm long rigid stems (4mm and 8mm diameter), and inspection report with a declaration of conformity, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and ot...
|
|