|
|
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $121.56 44% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced ...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-527E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-527E
Color: Yellow
|
The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicato...
-
4.0 of 5.0 with 9 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: TMPLTAS
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: TMPLTAS
Defelsko PosiTector drilling template for 50mm dollies. Includes (10) drill bits 5/32" (4mm). Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete.
-
4.0 of 5.0 with 34 Reviews
SALE PRICE: $128.00
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
Extra long M5 stylus, 0.5 mm carbide ball, 11.0 mm diameter by 50.0 mm long stainless steel base. Overall stylus length is 60.0 mm. Stylus weight is 11.11 grams.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $137.52 20% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-514E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-514E
Color: Yellow
|
The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicato...
-
4.0 of 5.0 with 19 Reviews
SALE PRICE: $138.08
Manufacturer: Noga
Brand: Noga
Manufacturer: Noga
Brand: Noga
Noga / Mitutoyo Combo NF61003 Magnetic Base 176 lb. Hold & MM Test Indicator Set
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $141.73 6% OFF
Manufacturer: Greenlee
Brand: Greenlee
Model: 5702
Manufacturer: Greenlee
Brand: Greenlee
Model: 5702
Greenlee 5702 Specifications: Live Phase Indicators: Three neon lamps Motor rotation Indicators: Two neon lampsMeasurement Category: Cat III, 600VGreenlee 5702 Features:Identifies L1, L2, L3 phases and indicates rotation of the motor before installation.Clockwise and counterclockwise indication via neon lamps.
-
4.0 of 5.0 with 21 Reviews
SALE PRICE: $146.91 30% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Manufacturer: Mitutoyo
Brand: Mitutoyo
Test Indicator
-
4.0 of 5.0 with 36 Reviews
SALE PRICE: $149.00 1% OFF
Manufacturer: Leica
Brand: Leica
Manufacturer: Leica
Brand: Leica
Laser Distance Meter, Indoor/Outdoor: Indoor/Outdoor, Range: 0 to 200 ft., Accuracy: +/-1/16", Function: Measure Distances Up to 200 ft. or Calculate Areas, Display: LDC, Features: Measure Distance, Calculate Area, Bluetooth Data Transfer to Supported Devices Via BT4.0, Free Leica Disto Sketch Application (Supported iOS/Android Devices) or to 3rd Party Applications, IP54 Dust/Splash Protection, Display In Meters, Battery Type: (2) AAA, Includes: Lanyard, Holster, Belt Clip, (2) AAA Batteries, User Manual, Quick Start Guide
-
4.0 of 5.0 with 41 Reviews
SALE PRICE: $149.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Premium Quality Precision Dial indicators - AGD 2. Made in Japan Features Extremely Smooth Precision Gears inch and Metric Models. Other Features: Contact Point Made of tool steel, Hardened ground and chrome plated. Stem Made of stainless steel
|
|