|
|
-
4.6 of 5.0 with 36 Reviews
SALE PRICE: $346.00 1% OFF
Manufacturer: Dakota Ultrasonics
Brand: Dakota Ultrasonics
Manufacturer: Dakota Ultrasonics
Brand: Dakota Ultrasonics
The T-102-3300 Dual Element Transducer, 1/4" Diameter, 7.5 MHz is a 1/4" diameter, 7.5 MHz dual element transducer. Potted cable, side in.
-
4.6 of 5.0 with 22 Reviews
SALE PRICE: $349.00 1% OFF
Manufacturer: Shenzhen Jumaoyuan
Brand: RZ
Manufacturer: Shenzhen Jumaoyuan
Brand: RZ
|
Introduction: This portable product adopts magnetic induction technique for measurement. The compact design perform fast, precise and non-destructive digital coating measurement and plating on steel magnetic conductor. It is widely used on manufacturing, workshop, chemistry or quality control fields. Features: 1-Model: GM220 2-Color: Ivory white 3-Professional Handheld Coating thickness gauge 4-100% brand new 5-LCD display measurement value and status. 6-Using Hi- sensibility sensor for precise measurement. 7- 0 point, 2 point and basic, three different calibration methods to make it easy to process the system quick calibration. 8-Measure mode: Single, continually and difference . 9-Data record, recall and delete function. 10-Data analysis: Average, Maximum, Minimum, standard deviation, and measure times. 11-Beep sounds indication. 12-Measure in Metric / Imperial. 13-Low Battery indication. 14-Auto power off 15-LCD backlight Specification: 1- Measurement range: 01800m -Resolution: 0.1m /m -Accuracy: (3%H + 1) 2-Condition of Objective material: 2-1-Suitable for measure non-magnetic coating on magnetic conductor base material. 2-2-The minimum curvature radius. Convex: 2mm Convex: 2 Concave=11 Concave: 11mm 2-3-Minimum Sample diameter: 12mm 2-4-Minimum Substrate thickness : 0.5mm 3-LCD display: 3 1/2 display 4-Power supply: 9V Alkaline battery (not included) 5-Operation current: About 14mA 6-Auto power off: 1 minute 7-LCD backlight function: 7 second 8-Operation humidity: 10~95% RH 9-Low battery indication: 7.0V+/-0.2V 10-Size: 177x65x30mm 14-Dimension: 180x66x30mm 15-Weight: 146g Packet Content: 1 x Vibration Meter 1 x Digital film coating thickness gauge 1 x Instruction Manual 6 x Standard sheet gauge 1 x Iron base material for calibration
-
4.6 of 5.0 with 10 Reviews
SALE PRICE: $350.00
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: FM
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: FM
|
The PosiTest by DeFelsko is a high-quality, easy-to-use instrument for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. It features a rugged housing and durable design, and is not affected by mechanical shock, water, acid, or solvents. The PosiTest can be used in many places that electronic instruments can't go- such as underwater or in explosive environments. The PosiTest is also ideal for inspectors who desire a quick spot check without the cost or complexity of a more advanced electronic instrument.The PosiTest features unmatched quality and accuracy among mechanical coating thickness gages, and each PosiTest comes with a Long Form Certificate of Calibration showing traceability to PTB. The PosiTest also features a wear-resistant Carbide Probe for longest life and continuous accuracy. The PosiTest is easy to use- simply place PosiTest on the coating to be measured, roll the dial wheel forward with your index finger, and depress the visual indicator. Once the visual indicator remains down, use your index finger to slowly turn the dial wheel in the opposite direction, until you hear a click and see the visual indicator pop up. At this point, read the coating thickness on the scale. The PosiTest is precisely balanced to be unaffected by gravity, and can be used in any orientation. Each PosiTest comes complete with leather pouch (with belt clip), wrist strap, instructions, Long Form Certificate of Calibration traceable to PTB, and a two year warranty.
-
4.6 of 5.0 with 24 Reviews
SALE PRICE: $351.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The CMP A3 Coating Thickness Gauges Epoxy Coating on Aluminum Plates (4) is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $360.64 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
1/4" diameter, 7.5 MHz dual element transducer Potted cable, side in
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $362.54 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
|
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution. STDA1, STDA2, STDA3 Features Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder Ideal for use in the calibration lab, in the field or on the factory floor Certified and labeled in both Metric and Imperial units Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
-
4.6 of 5.0 with 30 Reviews
SALE PRICE: $373.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The Spare Probe for PosiTector 6000 F Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $374.70
Brand: Sinotech
Model: SK280F
Color: Black+red+yellow
Brand: Sinotech
Model: SK280F
Color: Black+red+yellow
Specification:
*Measuring range:0~1800µm
*Accuracy:±(3%H±1µm)
*Resolution: 0.1µm (100µm)
Features
l *Use Hi-sensibility sensor for precise measurement
l *Zero point, two point and basic, three different calibration
l *Measuring mode: Single, Continually and Difference
l *Data store/ Data recall/ Data delete function
l *Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times
l *Beep sound indication
l *Measure in Metric/Imperial
l *LCD backlight display
l *Low battery indication
l *Auto power off
l *Warranty: 12months
Package
*Packing method: Gift box + PP box
*Power supply: 9V battery
*Weight: 220g
*Dimension: 70*145*28mm
-
4.6 of 5.0 with 2 Reviews
SALE PRICE: $384.85 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.
-
4.6 of 5.0 with 39 Reviews
SALE PRICE: $388.00 7% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 1015B-4
Manufacturer: Starrett
Brand: Starrett
Model: 1015B-4
After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. Throat depths include 2-1/2", 4", and 6". The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 1/4" in diameter and is 1/8" thick.
|
|