Thickness Gauges - Page 16

Manufacturer: Checkline Brand: Checkline

Materials used: cast iron, plastics (polypropylene, polyethylene, etc.), fiberglass. Range in steel: 1/2" (.150" - 2.0") Wearface diamenter: 5/8" Crystal diameter: 1/2" 1/2" diameter, 3.5 MHz Coating Transducer

Manufacturer: Flesser Brand: Flesser

Features: 128*128 dot matrix LCD display, standard menu operations. Two measure modes: single and continuous. Three probe modes: auto, magnetic and eddy current. Two group modes: direct (DIR) and general (GEN). 80 readings can be stored for each group mode. Statistics display: mean, minimum, maximum and standard deviation. Zero point calibration and multi-point calibration (up to 4 points) for each group. Able to clear the calibration to start new applications. Able to recall / delete specified readings and delete group readings. Able to set / clear the high and low limit value for each group. Alarm symbol will be shown on the LCD while readings exceed the limit. Able to select the shown unit (including um, mm and mils) for the readings. Able to select different measuring speed for probe according to user's application. Able to connect the gauge with PC via USB interface and download the data stored in the gauge. Manually and automatic power off. Low battery and error indication. Package including: 1 * Coating Thickness Gauge 1 * Pack of Standard Foil 1 * Aluminum Substrate 1 * Steel Substrate 1 * USB Cable 1 * CD 1 * User Manual (English)

Manufacturer: Checkline Brand: Checkline

Materials used: steels, glass, thin plastics. Range in steel: 3/16" (.040" -6.0"), 1/4" (.040" - 6.0"), 1/2" (.050" - 19.99"). Wearface diamenter: 1/4", 3/8" or 5/8". Crystal diameter: 3/16", 1/4" or 1/2" 1/4" diameter, 5.00 MHz dual element transducer High Temperature (650°F), potted cable, top in

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-312S

Mitutoyo 547-312S IDC Digimatic Thickness Gage, Lens Thickness Reverse Anvil, 0-0.47"/0-12mm Range, 0.0005"/0.01mm Resolution, +/-0.001" Accuracy

Manufacturer: Checkline Brand: Checkline

The F-1101-30 Dial Foil Thickness Gauge, Measuring range 0.001 mm is used exclusively to measure the thickness of foils. The frame has the required rigidity, the insulation of the handle prevents transfer of heat from the hand of the user to the sensitive mechanical parts of the Dial Gauge. One revolution of the pointer equals 0,1 mm. Because of the 100 divisions on the scale the measuring result can be more easily and more accurately read off then on the predecessor model F 1000/30.

Manufacturer: Starrett Brand: Starrett Model: 1016

It is an indicator gage used to measure the thickness of disc brake rotors and to determine the depth of grooves worn in the rotor. This gage consists of a 1" range, 0.001" indicator reverse loaded, mounted on a frame with a 60 degree pointed anvil and a flat indicator contact. Eliminating the need for two separate gages. The frame has a 3-3/8" depth. Extremely hard and finely finished measuring surfaces, furnished with a 1" gage block standard.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: PRBFN-D

Defelsko PosiTector 6000 built-in probe. Heavy-duty, gold-plated locking connector for industrial environments. Probe retains its own unique calibration information (allowing full probe interchangeability). Ideal for one-handed operation. Measuring range: 0-60 mils. +/-(0.05 mils + 1 percent) 0-2 mils Then +/-(0.1 mils + 1 percent) accuracy.

Manufacturer: Checkline Brand: Checkline

Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.

Manufacturer: Checkline Brand: Checkline

Positector RTR Replica Tape Reader measures and records peak to valley surface profile height using replica tape. Features One-handed menu navigation Automatically subtracts the 50.8 µm (2 mil) incompressible substrate from all readings Solvent, acid, oil, water and dust resistant - weatherproof Shock-absorbing, protective rubber holster with belt clip Certificate of Calibration (Long Form) showing traceability to NIST included Conforms to national and international standards including ISO and ASTM PosiTector body accepts all PosiTector RTR, SPG, 6000, 200, DPM, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage High contrast backlit display for bright or dark environments Uses alkaline or rechargeable batteries (built-in charger) USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Screen Capture - record and save image into USB flash memory for record keeping and review Software updates via web keep your gage current RESET feature instantly restores factory settings Minimizes inspector workload by reducing the number of replicas needed to ensure accuracy Rugged indoor/outdoor instrument - ideal for field or shop use Measures height (H) and linearized height (HL) Check Shim provided to verify accuracy Mils/Microns switchable Display Languages: English, French, German, Spanish, Japanese, Chinese, Korean, Dutch, Portuguese, Italian, Norwegian, Russian, Czech, Polish and Turkish. Flip display enables right-side-up viewing Continually displays/updates average, standard deviation, min/max height and number of readings PosiSoft solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Two (2) year warranty on body AND probe [custom1] Measurement Range 20 to 115 µm (0.8 to 4.5 mils) Accuracy (H) ± 5 µm (± 0.2 mils) Resolution ± 1 µm (± 0.2 mils) Anvil Diameter ⌀6.3 mm (⌀0.25 inch) Anvil Pressure 110 grams-...

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 FNS Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.