Thickness Gauges - Page 32

Manufacturer: Checkline Brand: Checkline

The MTT-10-300-V Dial Thickness Gauge for Fleece with 300 mm Jaw Depth is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generate a specific "pressure" as required by many standardized test standard necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles and similar compressible materials. The instrument does not meet the DIN, EN and ISO standards. The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 FN Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.

Manufacturer: Hantek MSO7082BLG Brand: Hantek MSO7082BLG Model: Hantek MSO7082BLG

Specifications: 1.Horizontal •Model:MSO7082BLG •Bandwidth:80MHz •Channel:2 •Sampling Rate Range:2GSa/s •Memory Depth(Sample Points):32K •SEC/DIV Range:4ns/div-40s/div 2.Vertical •A/D Converter:8-bit resolution,each channel sampled simultaneously •VOLTS/DIV Range:2mV/div-5V/div at input BNC •Position Range: ±400mV(2mV/div-20mV/div);±2V(50mV/div-200mV/div) ±40V(500mV/div-2V/div);±50V(5V/div) •Optional Analog Bandwidth LImit(typical):20MHz •Low Frequency Response(-3db):≤10Hz at output BNC •Rise Time:≤4.4ns •Vertical Gain Accracy: ±3% for sample or average acquistion mode,5V/div to 10mV/div ±4% for sample or average acquistion mode,5mV/div to 2mV/div 3. Trigger •Trigger Type:Video,Edge,Pluse Width,Slope,Overtime, Code-type,Duration,Queue,Repeat,Alternate •Trigger Sensitivity(Edge Trigger Type): •Trigger Level Range: CH1,CH2:±8 divisions from center of screen;EXT:±1.2V;EXT/5:±6V 4. Input •Input Coupling:DC,AC or GND •Input Impedance,DC coupled:1MΩ±2% for 20pF±3pF •Probe Attenuation:1X,10X •Supported Probe Attenuation Factor:1X,10X,100X,1000X 4. Logic Analyer •Sampled Channels:8 •Max.Input Impedance:200K(C=10p) •Input Voltage Range:0-3V •Logic Threshold Range:0-3V •Max.Sample Rate:1GSa/s •Sample Depth:32K 5. Arbitrary Waveform Generator •Waveform Frequency:DC-25MHz •DAC clock:2K-200MHz adjustable •Frequency Resolution:0.1% •Waveform Depth:4KSa •Vertical Resolution:12bit •Frequency Stability:＜30ppm

Manufacturer: COLE-PARMER Brand: DeFelsko

These simple, durable, accurate gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, quickly and accurately. Select standard or advanced models based on your application requirements. All models include built-in temperature compensation along with a Hi-RES mode providing enhanced display resolution for applications requiring greater precision. All stored measurements are date and time stamped and the statistics mode continually displays and updates average, standard deviation, min/max thickness, and number of readings while measuring. The one-handed menu navigation makes set up and operation simple, and the flip display enables right-side-up viewing. Gauges offer multiple calibration adjustment options that include one-point, two-point, known thickness, and average zero along with four user-selectable display language settings (English, Spanish, German, and French) for additional flexibility. Use the USB connection with your PC or Mac web browser or file explorers to connect to PosiTector.net for the free web-based application software and updates. Advanced models include all features noted above in addition to expanded storage capability of 100,000 readings (in up to 1000 batches and sub-batches), data transfer via USB to a PC or via Bluetooth wireless technology to a PC or printer, onscreen help, real time graphing, picture prompting and batch notes, and a hi contrast reversible color LCD. Additional features include scan mode, multiple stored calibration adjustments, SSPC PA2 function to determine if film thickness over a large area conforms to user-specified min/max levels, and PSPC 90/10 function to determine if a coating system complies with an IMO performance standard for protective coatings. Gauges conform to: ISO 2178/2360/2808, PrEN ISO 19840, ASTM B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, and more What's Included: precision plastic shims, protective rubber holster with be

Manufacturer: Flexbar Machine Corporation Brand: Flexbar Model: 15945

Flexbar Ultrasonic Thickness Gage Quickly and accurately Measures the through Thickness of materials that have good sound transmission and Parallel cross sections such as metals, aluminum, Plastics, ceramics and glass. Ideal for Checking Castings, wall Thicknesses of pipes and pressure vessels to determine surface erosion. Main Features include: Very Compact; Fully calibratable; Range: 0-225mm (steel); Sound velocity: 1000-9999m/s; Stores 5 velocities and 10 Measurements; Uses 2 AA batteries; Probe and Cable included. Carrying Case included. Specifications: Automatic Zeroing, Coupling condition indication, Probe error correction: Microporcessor controlled, Automatic shut off, Measurement Range: 0.04-8 in (1.2-200mm) (Steel), Display period: 0.5 seconds, Minimum pipe Cylinder and Tube Diameter: 0.8 in x 0.1 in (20mm x 3mm), Tolerance: µ (1%H+0.1)mm, Operating current:

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. Brand: all-sun Model: EM2271

INTRODUCTION: This tester is designed to not-destructively measure the thickness of non-magnetic coatings(including paint,enamel,plastic,epoxy,etc)on iron,steel or aluminum. SPECIFICATION: Measuring Range: 0.0mm to 2.0mm 0mil to 80mil Accuracy : 2%rdg ±0.1mm, or 2%rdg ±4mil Note: Accuracy is guaranteed at the operating temperature of 23℃±℃ and relative humidity of not more than 75%. Resolution : 0.1mm/1mil Power Supply : 1 x 3V button cell, CR2032 or equivalent ( Move the battery's insulating piece away before using ) Operating Environment:Temperature: 0-40℃ Relative Humidity: < 80% Temperature Coefficent:0.05x(2%rdg±0.01mm,or 2%rdg±4mil)/℃ (< 18℃ or >28℃) Storage Environment:Temperature:-10℃ to 50℃ Relative Humidity:< 80% Size:6.9 x 3.8 x 2cm Weight : About 23g (including button cell) SET COMPRISE: 1 x Paint Thickness Tester 1 x English Manual Standard Blister Packaging

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: NK-50

Introduction: Analog Push Pull Gauge with compact size and high accuracy. They are easy to operate and handy. Single click on a knob on the device will convert the movement of the indication needle from the peak force indication (the needle stands still indicating peak force) to the tracking indication(the needle moves in accordance with change of force) . As two types of scales (Newton scale and kilogram scale) are available and you can choose the most suitable graduation from the range of 10N(1kgf) to 500N(50kgf) for your measurement purpose. Features: •Simultaneous display of two scales without any shift of measurement conversion. •Easy operation and can be installed on all testing tables. •Pointer style makes figure-reading easy and precise •Peak value maintenance and load capacity real-time display can be flexibley shifted. •Reliable quality and fine package make the force gauge easy to keep and maintain Specifications: •Model:NK-50 •Max load:50N/5kg •Min load:5N/0.5kg •Load graduation value:0.25 N/50 g •Rod journey: 10 mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7301

Mitutoyo 7301 Dial Thickness Gage, 0-10mm Range, 0.01mm Graduation, +/- 15 Micrometer Accuracy

Manufacturer: Mitutoyo 513-404E Brand: Mitutoyo 513-404E Model: Mitutoyo 513-404E

Features: • Anti-magnetic • Jeweled bearings • No-clutch structure • Water and dust resistant • Glare-free crystal with scratch-resistant coating • Metric dial faces in yellow • The most direct gear train design ever applied to Test Indicators means-higher level of sensitivity, reliability, repeatability and accuracy throughout tool life. Specifications: • Dial Rading: 0-40-0mm • Graduation: 0.0mm • Accuracy: 0.008mm • Measuring force: 0.08-mm

Manufacturer: KKmoon Brand: KKmoon

The coating thickness gauge can measure the coating and clad layer on metal accurately and quickly. It is small in size, easy to carry.Specifications: Probe: F Probe + N Probe Measurement Range: 0-1300μm Error: ±(3%+2μm) Accuracy: 0-999μm(1μm)          1000-1300μm(0.01mm) Statistic Display: Mean / Min / Max / Sdev Battery: 2 * 1.5V AAA(not included) Operating Temperature: 0-40°C Operating Humidity: 20%-90%RH Item Size: 10 * 5 * 2.5cm / 3.9 * 2 * 1in Item Weight: 86g / 3oz Package Size: 23 * 15.5 * 6cm / 9.1 * 6.1 * 2.4in Package Weight: 300g / 10.6ozPackage List: 1 * Coating Thickness Gauge 2 * Pcs of Substrate Material 1 * Bag of Calibration Film 1 * USB Cable 1 * CD 1 * User Manual(English)