Thickness Gauges - Page 34

Manufacturer: VETUS INSTRUMENTS Brand: VETUS INSTRUMENTS

DR320 coating thickness gauge is the principle of electromagnetic induction, according to the national industry: GB/T 4956-1985 standard, can quickly, without damage, precision magnetic metal surface coating thickness measurement. Nondestructive measure magnetic metal (such as steel, iron, nickel) and non-magnetic thickness (such as: paint, electrophoresis, enamel, rubber, enamel, powder, coating, zinc, chromium); integrated DR320 coating thickness tester portable, integrated, intelligent digital display etc. the instrument, exquisite small, using a metal probe, for field testing and stable, more firmly. The instrument can be widely used in manufacturing, metal processing, chemical industry, commodity inspection and other fields. Technical Specifications *Measuring range: 0-1250μm *Accuracy: ±(1%-3%)H+1.5μm *Resolution:0.1μm /1μm (below 100μm is 0.1μm, above 100μm is 1μm) *Reaction rate: 50 readings per minute *Thinnest matrix: 0.4mm *Minimum curvature convex 5mm; concave 25mm *Minimum matrix 10*10mm *The instrument can store 116 measurement data *Four statistical functions: maximum, minimum, average, the number of measurements, press the TA key to access *High impact resistant ABS plastic housing, very suitable for paint with powder coating environment *Beep beep prompt (single measurement) *Automatic identification of ferrous and non ferrous substrates *Dimensions: 102mm*62mm*27mm *Weight: 99g *Use environment: temperature: 0℃-50℃, humidity: 20%RH-90%RH, no strong magnetic field environment *Power supply: two (No. 5) alkaline battery（Battery not included in the package） *Standard packing:DR320 coating thickness gauge;4 * calibrated diaphragm (50,100,250,370μm);Iron matrix;ABS instrument packing box;Instructions; Certificate; Cleaning cloth

Manufacturer: DeFelsko Brand: DeFelsko

The CMP S3 Coating Thickness Gauges Epoxy Coating on Steel Plates (4) is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: DeFelsko Brand: DeFelsko

DeFelsko CMP S2 Coating Thickness Gauges Epoxy Coating on Steel Plates (4)

Manufacturer: Checkline Brand: Checkline

The F-1000-30 Dial Thickness Gauge For Foils and Thin Materials, Measuring Range: 1 mm is a special-purpose thickness gauge for foils and thin materials with a resolution of 0.001 mm. Insulated handle prevents transfer of heat from the operatorss hand to the handle which helps to guarantee the highest accuracy.

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-174-2006 Dual Element Transducer, 1/2" Diameter, 5.00 MHz is a 1/2" diameter, 5.00 MHz dual element transducer for TI-25M-UWM. Potted cable, top in

Manufacturer: Checkline Brand: Checkline

The DCF-900 Coating Thickness Gauges Complete Kit for Ferrous Metal Substrates is a precision instrument that measures the thickness of paint, plating, coatings and galvanizing on iron or steel...more accurately, dependably and economically! DCN-900 Coating Thickness Gauge measures the thickness of paint coatings, anodize on aluminum, brass, zinc, stainless steel and other non-ferrous metals.

Manufacturer: CEM Brand: CEM

Dual Technology Features Automatic Selection of Magnetic Induction or Eddy Current Measurement Techniques. The measuring data is easily transfered to PC for edit and storage.

Manufacturer: Checkline Brand: Checkline

Materials used: Metals, glass 1/4" diameter, 15 MHz delay line transducer with cable. Includes 1/2" and 3/8" length interchangeable delay lines tips. Single element delay line transducer, 15 MHz (007 gauges only)

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: LM100 Color: Black

Working Principle:To use the impact body of certain weight impacts against the testing surface under certain spring force, leeb hardness means the ratio of the impacting velocity and the rebounding velocity of the impact body when the spherically test tip is located 1 mm above the testing surface. Specification: •Measuring Method:Leeb Hardness Method •Hardness Scale:HL, HB, HRB, HRC, HV, ob •Measuring Range:HLD (200-960), HRC (19.8-68.5), HRB (13.5-100), HB (30-651), HV (80-976), HS (26.4-99.5), b(375-2639) •Impact Device:D type impact device standard, optional C/G/DC/DL/D+15 •Accuracy:±6HLD (HLD=800), Repeatability< 6HLD (HLD=800) •Measuring Direction:360 degree by manual setting •Material:Steel & Cast Steel, Stainless Steel, GC iron, NC iron, Cast Aluminum alloy, Macht metal, Copper-tin alloy, Brass. •Resolution:1HL, 1HV, 1HB, 0.1HRB,0.1HRC, 0.1HS •Display:High Contrast Segment Liquid Crystal Display (LED Backlight) •Data Memory:100 groups (each group include 1-7 testing result and 1 MEAN value) •Communication:USB port (Standard) and Blue tooth (Optional) •Printer:Thermal Printer with blue tooth (optional) •Power:2 AA batteries •Temperature: -10°C to +50°C Standard Accessories:•LM100 Main Unit •D Type Impact Device •Standard Test Block •Rubber Sheath •Small Support Ring •Cleaning Brush •Operating Manual •Instrument Case OptionalAccessories: •Impact Device:D/C/G/DC/DL/D+15 •Standard Test Block •Blue tooth module & Thermal Printer •Belt •Standard Support Ring •Small Support Ring •Special Support Ring

Manufacturer: LANDTEK (GUANGZHOU) INSTRUMENT Brand: Reed Instruments Model: CM-8822-NIST

The REED Coating Thickness Gauge measures the thickness of non-magnetic coatings on magnetic or non-magnetic metal substrates. The meter features automatic probe recognition, automatic calibration, a large easy-to-read LCD that provides exact readings without guessing or errors and µm/mil conversion switch.