Height Gauges - Page 10

Manufacturer: Generic Brand: Generic

The measuring unit moves over two independent columns with an accurate measurement

Manufacturer: Starrett Brand: Starrett Model: 3259-12

The Starrett stainless steel dual post dial height gauge has up/down counters that can be reset, a hand-operated feed wheel, a carbide-tipped scriber, and a glare-free rust-resistant, satin chrome finish. The dial gauge has distinct, easily read figures for precise measurement in gradations of 0.001". A lock holds the slide in position. Two separate digital counters register upward and downward travel. Zero setting capability resets to zero at any point for easy reading without special calculations. The gauge is lowered and raised smoothly and evenly on the dual beams by a hand-operated feed wheel with coarse and fine adjustment. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and long life. The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling and is hardened, ground, and lapped for maximum flatness.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: HHIP Brand: HHIP

20"/500mm Electronic Height Gage With Wheel ~ Large control panel. ~ Beam is made of stainless steel. ~ Fine adjustment. ~ Inch/mm conversion. ~ Zero setting. ~ ~ Carbide tipped scriber. ~ Item requires a 1.5V SR44 battery. ~ Ergonomic heavy duty base.

Manufacturer: INSIZE Brand: INSIZE Model: 1150-300

Electronic Height gage, 0-12"/0-300mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 192-130

The Mitutoyo 192-130 dial height gauge has a measurement range of 0 to 300 mm, and is precise to 0.01 mm, with + or - 0.03 mm of accuracy. The dial gauge has distinct, easily-read figures for precise measurement to 0.01 mm, and dual, resettable counters additionally measure discrete up and down distance changes, in 0.1 mm increments. A large, hand-operated feed wheel raises and lowers the gauge on the parallel beams with smooth, even travel. The included scriber, used to mark a position on a workpiece, is 80 mm (l) x 32 mm (h), carbide-tipped for hardness and long life, and is held to the gauge by a screw clamp for easy and secure fastening. The grip-base design provides comfort when holding the unit in position by hand. The dial and counters display large, easily-viewed figures. The mass (weight) of the height gauge is 4.2 kg. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 6902-106A

Stand for Granite surface plate 6900-a23.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 192-663-10

The Mitutoyo 192-663-10 LCD Digimatic height gauge displays in metric units within a range of 0 - 300 mm, has an LCD digital readout with selectable resolution of 0.01mm or 0.005mm, with + or - 0.02 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset up to two reference heights at any position, hold data at any position, compensate for probe diameter, as well as set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. The scriber, used to mark a position on a workpiece, is 42 mm x 150 mm (H x L), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A dual-column beam provides stability that helps promote accurate measurements. A hand-operated feed wheel raises and lowers the gauge on the beam for ease of measurement, and is selectable for coarse or fine travel. The grip-base helps hold the unit in position by hand. The height gauge weighs 12.56 lbs/5.7 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, th...

Manufacturer: Barry Wixey Development Brand: Wixey Model: WR25 Color: Multi

The Wixey WR25 Mini Digital Height Gauge is a Light Weight, Easy to Use Gauge for all Types of Wood Working Applications. Use this Gauge for Setting Saw Blade and Router Bit Heights as Well as Positioning Fences on Router Tables and Band Saws. The Large Easy to Read Display Reads in Inches with Fractions or Millimeters. The Fractions are Displayed Using Precise Fraction Technology which Gives you 4 Times The Accuracy of Other Fraction Readouts. The Decimal Inches are Displayed in .002-Inch Increments and The Millimeters in .1mm Increments. The Accuracy and Repeatability Are .004-Inch (.1mm)

Manufacturer: Capri Tools Brand: Capri Tools Model: 20004 Color: Black

This Capri Tools mini digital height gauge is capable of precise height and depth measurements. The large display reads in decimal inches, fractional inches, or millimeters. The self-standing gauge has magnetic feet to enable setting cutter depth on router tables and has a low profile for back fence adjustments. For total accuracy, switch between ABS (preset) and INC (zeroset) measurement modes.

Manufacturer: Generic Brand: Generic

One tool does the layout and measuring work of several others. Multi-Function Height/Depth Gauge is primarily used to set table saw blade height from tabletop, fence-to-sawblade distance and miter-slot-to-blade alignment as well as establish router bit and drill press depths and drill bit stop locations, set radial arm saw dado depth and blade height from tabletop, but it also performs a number of other important jobs: Use gauge to mark or scribe a line - mark straight lines up to 5" from board edges and set up your band saw and shaper table, too. Depth rod measures up to 5" for dadoes, slots, dowel and screw holes and in tight spots. 6-1/8"H x 1-1/2"TH x 4-3/8"W - engineered reinforced polymer and steel/brass construction. Photo engraved, tempered stainless steel 5" scale is marked in precise 1/32" increments. All measurements are read on just one scale - reverse scale for millimeters up to 12.5cm. Magnetic base ensures secure grip on ferrous metal surfaces. Includes hex wrench and complete calibration and use instructions. Imported. U.S. Patent No. UM-77013 and 5,491,907.