Height Gauges - Page 25

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 506-207

The Mitutoyo 506-207 lightweight vernier height gauge has a measurement range of 0 to 200 mm, is precise to 0.02 mm, with + or - 0.03 mm of accuracy, and is suitable for scribing from a vertical base or for measuring small objects. The vernier scale provides precise, fine measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. The included scriber, used to mark a position on a workpiece, is 47 mm long, carbide-tipped for hardness and long life, and is held to the gauge by a screw clamp for easy and secure fastening. The grip-base design provides comfort when holding the unit in position by hand. The slider and beam are made of stainless steel. Large, easily-viewed figures and a glare-free satin chrome finish that resists rust ensure error-free reading. The mass (weight) of the height gauge is 1.4 kg. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mettler Brand: Mettler

The Mettler Pneumatic Stand Base (AP 101) (#6030) includes pneumatic balanced height control 12 inch range, with the castor base unit. The Mettler Pneumatic Stand Base is an accessory specifically for the Mettler G5 Massage Machines.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 192-670-10

The Mitutoyo 192-670-10 LCD Digimatic height gauge displays in inches or metric units within a range of 0” to 12” (0 - 300 mm), has an LCD digital readout with selectable resolution of 0.0005” (0.01mm) or 0.0002” (0.005mm), with + or – 0.001” (0.02 mm) of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset up to two reference heights at any position, hold data at any position, compensate for probe diameter, as well as set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. The scriber, used to mark a position on a workpiece, is 45.7 mm x 150 mm (H x L), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A dual-column beam provides stability that helps promote accurate measurements. A hand-operated feed wheel raises and lowers the gauge on the beam for ease of measurement, and is selectable for coarse or fine travel. The grip-base helps hold the unit in position by hand. The height gauge weighs 12.56 lbs/5.7 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position o...

Manufacturer: Starrett Brand: Starrett

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2124-2001

Spring loaded setting face。

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: ABVE-0018

Max. measuring speed: 1 m/s ABS/INC switchable Reset/preset On/off switch Delivery complete with mounting material Power supply: 1 battery(V357) Can be used with 3-Axis DRO Display (1104-0110V) or one Axis DRO Position #1104-8111or individually

Manufacturer: INSIZE Brand: INSIZE Model: 1253-150

Vernier Height gage, 0-6"/0-150mm, graduation 001" 0/02mm.

Manufacturer: Fowler Brand: Fowler

Fowler Pair of Internal Anvils for Mini Horizontal Ø6mm and Up 53-190-029

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Rugged construction of stainless steel with no rack, no pinion, and no glass scale. FEATURES: * 5 Digit high contrast display * Inch / Metric switch * Floating "Zero" reference point * Resolution +/- .0005" / 0.01mm * Accuracy .001" * Includes : battery

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: DBHG-0012