Height Gauges - Page 27

Manufacturer: Hexagon Metrology, Inc. Brand: Standard Gage Model: 07734007

Standard Gage IP67 digital scribing height gages provide great value. Available in 12 inch or 24 inch sizes, they feature Absolute and Relative modes, PRESET function, Keypad lock, RS data output, Auto-off and inch/metric readings.

Manufacturer: STAKF Brand: Starrett Model: 3752-24/600

The 3752 Electronic Height Gage is a full featured, versatile and economic solution for most height measurement applications. All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection and hard copy documentation. They are available in 0-12" and 0-24" ranges.

Manufacturer: INSIZE Brand: INSIZE Model: 6900-A23

Granite surface plate, 24x36x4", grade a.

Manufacturer: Barta Tool Brand: Barta Tool Model: 13080

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-174-212-0

The Fowler 52-174-212 is twin-beam height gauge with a dial gauge, resettable up/down counters, hand-operated feed wheel, a carbide-tipped scriber, a rust-resistant satin chrome finish, a measurement range of 0 to 12" (300mm), and is precise to 0.001" (0.02mm). The dial gauge has distinct, easily read figures for precise measurement. Two separate digit counters register upward and downward travel. Zero setting capability resets to zero at any point for easy reading without special calculations. The gauge is lowered and raised smoothly and evenly on the dual beams by a hand-operated feed wheel with coarse and fine adjustment. Coarse readings are in 0.100" graduations; fine readings are in 0.001" graduations. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling and is hardened, ground, and lapped for maximum flatness.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Starrett Brand: Starrett Model: 3250Z-6

The Starrett stainless steel dial height gauge has a measurement range of 0 to 6" (150mm), a fine adjustment thumb roll, a slide lock, a steel scriber, and a hardened stainless steel bar. The dial gauge has distinct, easily read figures for precise measurement. A fine adjustment thumb roll provides precision measurements. A lock holds the slide in position. The included scriber, used to mark position on the workpiece, is steel for hardness and durability, cuts clean, sharp lines with smoothness and less pressure, and can reference zero from the bottom of the base to get the full usable range. The bar is hardened, stainless steel for long life and is back from the edge of the nose for stability. The base is hardened, ground, and lapped with finger grooves for a comfortable handgrip and ease of movement. The gauge can measure depth of holes, slots, and recesses with the PT08680A depth attachment (sold separately). The gauge comes with the scriber and an aluminum case with foam inserts to cushion the instrument.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?Starrett stainless st...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-302

The Mitutoyo 570-302 LCD Absolute Digimatic height gauge displays a metric measurement range of 0 - 300 mm, an LCD digital readout precise to 0.01 mm, with + or - 0.03 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as to set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. An electrostatic capacitance linear encoder helps prevent overspeed errors to help ensure repeatable, precise measurement. A hand-operated feed wheel raises and lowers the gauge on the beam for measurement ease, and a clamp lever allows the user to hold measurement position. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped to help prolong life, and is held to the gauge by a screw clamp for fastening ease. The grip-base helps hold the unit in position by hand. The height gauge weighs 10.14 lbs/4.6 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-sign...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-174-224-0

The Fowler 52-174-224 is twin-beam height gauge with a dial gauge, resettable up/down counters, hand-operated feed wheel, a carbide-tipped scriber, a rust-resistant satin chrome finish, a measurement range of 0 to 24", and is precise to 0.001". The dial gauge has distinct, easily read figures for precise measurement. Two separate digit counters register upward and downward travel. Zero setting capability resets to zero or any reference figure at any point for easy reading without special calculations. The gauge is lowered and raised smoothly and evenly on the dual beams by a hand-operated feed wheel with coarse and fine adjustment. Coarse readings are in 0.100" graduations; fine readings are in 0.001" graduations. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling and is hardened, ground, and lapped for maximum flatness.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage 07734004 LCD electronic height gauge has a measurement range of 0” - 24”/0 - 600 mm, an LCD digital readout precise to 0.0005”/0.01 mm, with + or - 0.002”/0.05 mm of accuracy, and RS-232C data output to transmit results to a computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to hold a measurement at any position, to set a temporary zero position and return to a true zero reading, and to convert between standard inch units and metric, and to absolute value . The RS-232C output port transmits results to a computer through an interface cable (not included) for statistical process control (SPC). The scriber, used to mark a position on a workpiece, is 15.7 mm x 75 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A calibrated screw mechanism supports fine, uniform slider adjustments. The grip-base helps hold the unit in position by hand. The unit comes with a protective case, a CR2032 battery, and an inspection report./p> Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard G...

Manufacturer: Rockler Brand: Rockler

Easy and accurate depth adjustments from 1/8" to 1". Now you can determine perfect settings in precise 1/16" increments. Made from heavy duty aluminum.