Depth Gauges - Page 16

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-110-0

The Fowler Economy Depth Micrometers, depending on the model, have a measurement range of 0 to 4" or 0 to 6", a base of 2.5" or 4", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.001" of accuracy. The vernier scale provides precise measurements in fine units. Depending on the range of the model, the gauges include either or 0.176" diameter measuring rods. The units have a ratchet thimble and locking clamp for accuracy. The bases of the units are ground, hardened, and lapped for durability and accuracy. They have a satin chrome finish to reduce glare when reading measurements. They come with two wrenches and a hardened case. The gauges conform to Federal Accuracy specifications. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage 00224002 Value Vernier Depth Gauge has a measurement range of 0 to 6" and is accurate to + or - 0.00020". Gradient spacing is 0.001" and the base is 2.5". Six high accuracy interchangeable depth rods are adjusted in increments of 1". The ratchet friction thimble and locking nut provide accurate measurement readings and adjustments. The base surface is hardened and ground for accurate readings. There is no need for resetting when changing rods. The gauge is made of steel for durability. Designed for measuring the depth of holes, slots, and recesses, and for inspecting jib, fixtures, and die work, these depth gauges are also convenient for measuring coordinate distances from a work surface to toolmakers' buttons.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe rectangular mounting base is available in a 2", 3", 4", 6", or 8" length and has one to three collet mounting hole locations for use with Brown & Sharpe depth gauges. The supplied mounting collet holds a depth gauge (sold separately) securely. The base is 9/16" high and has 9/16" tapped mounting holes. It is made of hardened steel for durability and accurate measurements, and is suitable for precise measurement in a variety of manufacturing, machining, and mechanical engineering applications.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-116-0

The Fowler Economy Depth Micrometers, depending on the model, have a measurement range of 0 to 4" or 0 to 6", a base of 2.5" or 4", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.001" of accuracy. The vernier scale provides precise measurements in fine units. Depending on the range of the model, the gauges include either or 0.176" diameter measuring rods. The units have a ratchet thimble and locking clamp for accuracy. The bases of the units are ground, hardened, and lapped for durability and accuracy. They have a satin chrome finish to reduce glare when reading measurements. They come with two wrenches and a hardened case. The gauges conform to Federal Accuracy specifications. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: BETA TOOLS Brand: Beta Tools

Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

• 5 key Deluxe Model micrometer head • Spherical rod end • High accuracy interchangeable rods • Friction thimble • 4" Base

Manufacturer: Pentair Brand: Pentair

Technical Specification Item Red Line Glass Rod Kit Center to Center Length 26 Glass Tube O.D. 3/4 Glass Length 24 Body Material Borosilicate Glass, Bronze Rod Number of Guard Rods 4 Max. Pressure 400 psi Max. Temp. 300 Degrees F Includes 4 Rods; 1 Glass Tube Standards ASME This listing is for each.

Manufacturer: Fowler Brand: Fowler

Includes fitte case Inch/Metric Dial Depth Gage gives fast, accurate and easy to read depth measurements with inch graduations in black and metric graduations in red. Features Hardened stainless steel throughout. Positive locking screw. Thumbroll for rapid setting. Beam .630" wide and .128" thick. 4"/100mm Length Base Raised sliding surface prevents wear and defacement of graduations.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7223

The Mitutoyo Series 7200 Dial Depth Gauges, Indicator Type, Metric, depending on the model, have a measurement range of 0 to up to 210mm; a stroke (or travel distance of the indicator) of 5mm, 10mm, or 30mm; a resolution (or smallest graduation interval) of 0.01mm; with up to + or – 0.015mm of accuracy. The dial gauge interface provides precise and easily readable measurements. All units except model 7210 include extension measuring rods for flexibility. Models 7210 and 7222 have a carbide-tipped ball point for precise measurements. The bases of the units are available in both elongated and rounded designs. The bottom of the bases are hardened, ground, and lapped for durability and accuracy. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Westward Brand: Westward

Dial Bore Gage Set, Number of Pieces 10, Gages Hole Diameter, Measuring Range 0.7 To 1.5 In, Probe Depth 5.25 In, Graduations 0.0005 In, Dial Reading +/-0.025 In, Carbide Anvils, Chrome Plated Handle, Includes Extension Holder and Fitted Case