Depth Gauges - Page 29

Manufacturer: INSIZE Brand: INSIZE Model: 1142-150A

Electronic hook depth gage, 0-6"/0-150mm.

Manufacturer: INSIZE Brand: INSIZE Model: 3241-2

Depth micrometer, 0-2", graduation 001 inch base 3.996×.669".

Manufacturer: Fowler Brand: Fowler

0 - 4 Economy Depth Micrometer, 4 Base Includes: Case 4 base Features: Satin chrome finish Base surface hardened and ground Ratchet thimble Locking clamp Graduation: 0.001 Accuracy: 0.00016 Rod diameter: .176

Manufacturer: G.A.L. Gauge Co. Brand: G.A.L. Gauge Co.

The G.A.L. Gauge Co. Skew-T Fillet Weld Gauge with Calculator GAL-9c, Metric Measurement Scale is used for Checking Angle of Vertical Member, Weld Acute Side and Weld Obtuse Side

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 128-103

The Mitutoyo Series 128 Vernier Depth Gauge, Micrometer Type, Metric, have a measurement range of 0 to 25mm, a resolution (or smallest graduation interval) of 0.01mm, with + or – 0.003mm of accuracy. The vernier scale provides precise measurements. These gauges include a 4mm diameter measuring rod for flexibility in measuring range. The units have a ratchet stop for uniform pressure and a measuring rod clamp for stability. They have a satin chrome finish on the thimble for readability. They are available with a base either 63.6mm or 101.6mm long. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Grizzly Brand: Grizzly Model: G9609

Get ultimate accuracy while measuring depth in holes, steps and grooves. Sold in 8 ranges, these Depth Micrometers feature thick, wide bases for stability, easy-to-read display and unbeatable accuracy over any depth gauge! Resolution is 0.00005"/0.001mm.

Manufacturer: Starrett Brand: Starrett Model: 257B

The Starrett 257B full-sized surface gauge has both a 9"/225mm and a 12"/300mm spindle for mounting onto a hardened steel base, with a 6" scriber for accurately scribing lines, transferring measurements, and probing surfaces in inspection work. The spindles are 5/16" in diameter. The included scriber is 6" (150mm) in length and 9/64" (3.6mm) in diameter, and is held to the spindle by a sliding snug with a knurled, ring-type lock nut for secure positioning. The steel base is hardened, ground, and lapped for a smooth, flat surface, and measures 2-7/8 x 2-3/8 inches /72 x 60mm (W x D; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back). Four frictionally held gauge pins in the base can be pushed down and referenced against the edge of a surface plate or T-slot for linear work. The satin chrome finish resists rust and is glare-free. A surface gauges is a tool for machinists and toolmakers to mark lines on a workpiece, transfer measurements from one workpiece to another, and for probing surfaces in inspection work. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 257A

The Starrett 257A full-sized surface gauge has a 9” (225 mm) spindle mounted onto a hardened steel base, with a 6” (150 mm) scriber for accurately scribing lines, transferring measurements, and probing surfaces in inspection work. The included scriber is 6” (150 mm) in length and 9/64” (3.6 mm) in diameter, and is held to the spindle by a sliding snug with a knurled, ring-type lock nut for secure positioning. The 9” spindle is 5/16” in diameter. The steel base is hardened, ground, and lapped for a smooth, flat surface, and measures 2-7/8” (72 mm) by 2-3/8” (60 mm). Four frictionally held gauge pins in the base can be pushed down and referenced against the edge of a surface plate or T-slot for linear work. The satin chrome finish resists rust and is glare-free. Surface gauges, sometimes referred to as gages, are a tool for machinists and toolmakers to mark lines on a workpiece, transfer measurements from one workpiece to another, and for probing surfaces in inspection work. The scriber is held by a snug that travels on a vertical column (also called the spindle), and may be locked into position by a screw clamp. Surface gauges are typically used in manufacturing, machining, and mechanical engineering. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: STARRETT Brand: Starrett

0'' - 6'' 6 ROD X 1/8'' 4'' DEPTH GAGE MICROMETER SET

Manufacturer: Trend Brand: Trend Model: GAUGE/1

Metal rule depth gauge helps set the height of router bits and saw blades with greater accuracy.Self-standing for setting cutter depth on router tables and low profile for backfence adjustment. Horizontal and vertical measuring.For hand routers, router tables and table saws.With 2-3/8" wide aperture, accurate to 1/32".Measurement range is 3-1/8".Steel rule has dual metric and imperial scale.With unique cam lever lock.