Caliper Gages - Page 10

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-407 Color: White

The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-571

The Mitutoyo 209 series Digimatic caliper gauges have a combination analog/digital LCD display and large measuring depth for taking outside dimension (OD) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach outside dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring external wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately) for statistical process control (SPC). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the ...

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-915

Mitutoyo Digital Caliper Gage 209-915, External Tube Thickness Measurement Type, 0-1.57In, .001 In, 116mm Depth.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-606 Color: White

The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...

Manufacturer: Starrett Brand: Starrett Model: 1175Z Color: White

Starrett 1175Z Dial Indicator 81-136-1175 Groove Gauge is used for measuring inner diameter (ID) grooves and internal recesses, reads to 0.0005”, has a dial reading of + or - 30 graduations, and a total measurement range of 0.060”. Two sets of interchangeable jaws measure to gauging depths of 1.25” and 2.50”, and three sets of interchangeable contacts are used with 0.375” - 6.00” bore diameters, 0.100” - 0.265” groove depths, and 0.024” - 0.051” groove widths. The moveable gauging contacts have a 1/2” retractable range, are made from hardened steel and have a chrome finish for long life, and flush ends for gauging blind holes. The fixed lower jaw supports the weight of the gauge and the operator’s hands, preventing incorrect gauging pressure and false readings. A fine adjustment screw and lock help provide additional accuracy. Dial indicators, also called dial gauges, dial calipers, and probe indicators, are precision measuring tools used to measure small linear distances and object sizes. The dial magnifies the measurement for readability by the human eye. They are frequently used in manufacturing, laboratories, and other industrial or mechanical fields, and are suitable anywhere a small measurement must be taken and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: SODIAL(R) Brand: SODIAL(R) Color: Silver

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) 6Pcs Set Telescopic Gauge Set Micrometer Measurement Bore Engineers Kit 8-150mm SilverUsage£ºUnder uniform spring tension, the plunger of the gage expand from the center to the diameter of the hole or width of slot being measured and then locked in place by a knurled knob, the hole size is found by measuring over the two contact point with a micrometer or caliper.Material: Hardened tool steelColor: SilverPackage Included:1 Set 6 pcs Precision Telescoping Gage 8-150mmNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3cm.

Manufacturer: Does not apply Brand: Wonderfull Shop

LCD Electronic Digital Vernier Caliper Gauge Measure Support all job Measure Stone Bead Gem Jewelry Etc. Specifications: * Range: 0.1mm to 100 mm / 0.1inch to 4 inch * Resolution: 0.1mm / 0.01inch * Display: LCD screen * Power: One Battery (included), LR44/AG13 1.5V Package included: 1 x Electronic Digital Caliper 1 x 1.5V Button Cell 1 x Hard Storage Case

Manufacturer: Artdid Brand: drying oven

1.Crisp, clear, easy-to-read LCD display, accurate to 0.00016''. 2.Hardened and ground spindle with carbide anvil ensure durability and accuracy. 3.Comes in a padded case with adjustment wrench, instructions booklet and extra battery. Item Included: 160216*1

Manufacturer: Fowler Brand: Fowler

Features American Standard Gage Measuring range: Gage No. 0 to 36 Hardened and ground Made in America

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0801

HHIP internal dial caliper gage features 0-1 inch movement to check recessed diameters, internal bores, etc. Set with micrometers or a ring gage. Bezel can be rotated for zero setting and can be locked with screw. Carbide ball measuring points: 0.09 inch x 0.09 inch button: push to close arms. Arm Length: 3.25 inch arm thickness: 0.09 inch product specifications: range: 0.375 inch -1.375"; graduation: 0.001"; a: 5/32"; b: 5/32".