Caliper Gages - Page 11

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-611-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-622-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-624-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-625-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-789 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-555

The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...

Manufacturer: Flexbar Brand: Flexbar

Inside Dial Caliper Gages. Premium Quality. Made in Japan. Enables Precision Measurement of inner Diameters, Grooves, recesses, etc. inch Models: .0005" Graduation. Metric Models: 0,01mm Graduation. Model No. 18757, inside Dial Caliper Gage,001m Grad., 30-62mm Range.

Manufacturer: Starrett Brand: Starrett Model: 1019-1 Color: White

The Starrett 1019M-25 internal dial caliper gauge opens from 0.400” to 1.400” with a 3-1/4” arm length, and has carbide ball contacts for longer life and wear resistance. The arms reach into the workpiece, such as in bores of castings and inside readings in fabrications, to easily measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand is accurate. Dial indicators, also called dial gauges or probe indicators, are precision measuring tools used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-513

The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...

Manufacturer: TANZHI Brand: Ranipobo Model: 1180-0511 Color: Black

Product Feature: Electronic Digital Caliper Made of hardened stainless steel Internal, external and height dimensions can be easily and accurately measured Linear capacitive measuring system Zero setting in any position With a small locking thumb screw which locks the jaws in place Base measuring function: Inside, outside, depth and step measuring With easy to read large LCD display An ideal tool for a broad range of industrial and automotive applications Product Specification: Measuring range: 0-100 mm/ 0-4 inch. Resolution: 0.01mm/ 0.0005 in. Repeatability: 0.01mm/ 0.0005 in. Accuracy: ± 0.02 mm/ 0.001 in. (100 mm), ±0.03 mm/ 0.001 in. (100 ~ 150 mm) Maximum measurement speed: 1m/s or 1.5m/s Working temperature:0 ~40C Power: 2 x 1.5V SR44 (silver oxide cell) battery (included) or 1.55v Package Content: 1X Digital Caliper 1X Battery 1X Instruction Manual 1X Container Box