|
|
-
3.8 of 5.0 with 35 Reviews
SALE PRICE: $618.36 13% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-405
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-405
Color: White
|
The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...
-
3.8 of 5.0 with 37 Reviews
SALE PRICE: $861.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-920
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-920
Digimatic Caliper Gage - External Tube Thickness Measurement Type 0-1.97â€, Disk 50 mm for flat surfaces.
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $861.00 1% OFF
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 209-901
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 209-901
Mitutoyo Dial Caliper Gage 209-901, Internal Measurement,15-65mm, 0.05mm, 188mm Depth.
-
3.7 of 5.0 with 44 Reviews
SALE PRICE: $4.40 3% OFF
Manufacturer: L-FENG
Brand: L-FENG
Manufacturer: L-FENG
Brand: L-FENG
Color:White The shoe pouch will become your perfect travel companion. It helps keep your shoes together in your suitcase or weekend bag.
-
3.7 of 5.0 with 5 Reviews
SALE PRICE: $7.13 2% OFF
Manufacturer: uxcell
Brand: uxcell
Model: a16011800ux1263
Manufacturer: uxcell
Brand: uxcell
Model: a16011800ux1263
 Easy, convenient to use and storage, great ideal for home use.Perfect reseal unused portions of food, keep the food in freshness.You simply slids it along the edge of any bag and it is sealed airtight.    Provide protection against the moist, mould proof.A magnet on the based can be adsorbed on the metal surface.    Please open cover to preheat the item by pressing 5 seconds before using. Â
-
3.7 of 5.0 with 50 Reviews
SALE PRICE: $8.21 2% OFF
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Model: 024883
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Model: 024883
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. Material: Metal Condition: 100% new Weight: about 195 g Quantity: 1 piece Conversion: 1 mm = 0.0394 inch, 1g = 5 carat
-
3.7 of 5.0 with 39 Reviews
SALE PRICE: $19.99
Manufacturer: Balance World Inc
Brand: Balance World Inc
Manufacturer: Balance World Inc
Brand: Balance World Inc
100% brand new and high quality Durable stainless steel construction Extra Large easy to read digital LCD display Metric conversion & zero buttons Measures inside, outside and depth from 0 - 6"(0-150mm) Auto switch off for energy saving User manual is inside the retail box Specification: Material: Silicone Measuring range: 0~6"/0~150mm Resolution: ± 0.01mm/0.0005" Accuracy: ± 0.02mm/0.001"(
-
3.7 of 5.0 with 25 Reviews
SALE PRICE: $45.82 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Features U.S. Standard Gage Measuring range: Gage No. 0 to 36 Hardened and ground Made in America
-
3.7 of 5.0 with 41 Reviews
SALE PRICE: $49.66 35% OFF
Manufacturer: Kihappy
Brand: Kihappy
Color: Silver
Manufacturer: Kihappy
Brand: Kihappy
Color: Silver
-
3.7 of 5.0 with 18 Reviews
SALE PRICE: $93.80 85% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 1019M-25
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 1019M-25
Color: Yellow
|
The Starrett 1019M-25 internal dial caliper gauge opens from 25 mm to 75 mm with a 3-1/4†(approximately 80 mm) arm length, and has carbide ball contacts for longer life and wear resistance. The arms reach into the workpiece, such as in bores of castings and inside readings in fabrications, to easily measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand is accurate. Dial indicators, also called dial gauges or probe indicators, are precision measuring tools used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.
|
|