Digital Calipers - Page 52

Manufacturer: ykwjc Brand: NOBLE HARDWARE Model: GJ00010BL Color: Silver

Resolution: digital indicator: 0.01mm/0.0005＂, 0.01mm/0.001＂ Digital micro-indicator:0.001mm/0.00005＂ Measuring range: digital indicator: 0 ~ 12.7mm/0.5＂, 0~25.4mm/1＂ Digital micro-indicator: 0~5mm/0~0.2＂,0~12.7mm/0.5＂,0~25.4mm/1＂ Power: one sliver oxide batter (SR44) with work voltage 1.5v. Operating temperature: 0℃~40℃ Storage temperature:-20℃~70℃ Relative humidity:≦80% Application instruction for digital indicator important 1. The response speed: ≦0.5m/s 2. Avoid shocks, impact, dropping etc.; otherwise it will damage the appearance and precision 3.Keep indicator face clean, prevent liquid from getting into inside. 4. Do not remove output connector lid without using output interface. Output en should never be connected with metal. Doing so could damage your indicator. 5. Do not connect any part of digital indicator with voltage; otherwise it will damage the circuit.6. Must take out the battery if not in use for a long time Usages of type II：Clean the contact point and spindle with a soft cloth before using. Press the in/mm switch or push the spindle.The .00mm or .000mm display appears,the indicator is now ready for measurement. Usages of the "M" button; Display holding:press "M" button, "H" appears and display is holding. Fast display:press "M" button, "H" appears and press zero button, "F.T" appears,and now display is fast. Press "M" button to end fast display after measuring and "F.T" disappear. Fast tracing of maximum value: Button, "HMAX" appears,then press zero-setting button, "F.T MAX" appears and now is tracing of maximum value. Press "M" button to end tracing of maximum value after measuring and "F.T MIN" disappear. d.Fast tracing of minimum value: press three times "M" button,"HMIN" appears,then press zero-setting button,"F.T MIN" appears and now is tracing of minimum value after measuring and "F.T MIN" disappear.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-222-708-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Globe Warehouse

Features: 0-12" (0-300mm) Range Precision 3-key model: On/Off, Inch/MM, Zero Switchable inch/metric with resolution to .0005"/.01mm on high contrast LCD display Accuracy: 0.001" (0.02mm) Repeatability: 0.0005" (0.01mm) 4-way measurements: Outside, Inside, Depth & Step Stainless steel hardened frame, complete with fitted plastic case

Manufacturer: AccuRemote Brand: AccuRemote

High Precision Tool Upgrade your Milling Machine or Lathe to Digital reading. This digimatic scale is designed specifically for convenient display of any axis of a machine tool movement. Can be mounted on almost any surface, offering the user precise linear measurment capabilities. Precise depth control floating zero allows you to set "zero" anywhere within operating range with a push of a button. Features: Rule made of STAINLESS STEEL to promote high accuracy and repeatability. Super Large, easy to read display shows inch, decimal, fractional and metric readings Magnetic Remote display with 50" cord for easy installation and access Can be used in Vertical, Horizontal or any position Preset function: Easy to set up and convenient to use. Measure range: 0-24". Cut down to any desired length. Accuracy: 0.001" Reading: 0.0005"/0.01mm/64ths/inch Include brackets for vertical or horizontal mounting DRO rule can be cut to fit specific applications.

Manufacturer: APG Brand: APG(ship from CA) Model: APG Color: Silver+Black

All goods are checked carefully before shipped out. And we have US warehouse to give our customer faster and better service. Specifications: ● Weight: 70g ● Display: LCD screen ● Color: Silver+Black ● Power: One Battery (included), LR44/AG13 1.5V ● Measuring Range: 0-100 mm / 0-4 inch Resolution: 0.1 mm / 0.01 inch Packing content: √ 1 x 1.5V Button Cell √ 1 x Electronic Digital Caliper √ 1 x Hard Storage Case

Manufacturer: Sona Enterprises Brand: SE Model: 784EC Color: N/A

This SAE & Metric Digital Caliper is the perfect tool for precise measurements required by both everyday professionals and casual users. Features of this product include: • Extra-large digital screen • Stainless steel construction • Measures from .001” to 6” (0.01mm to 150mm) • Resolution: 0.0005”/0.01mm • Measures inner & outer • Smooth thumb roller • Step measuring surface Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE is committed to providing the customer with the best source for value possible. You will enjoy the quality, function and usefulness our Digital Caliper in both SAE & Metric has to offer. SE is a registered trademark protected by US Trademark Law.

Manufacturer: AnytimeTools Brand: Anytime Tools Model: 203359

Extend the reach of your calipers Measure in places that are impossible to reach with a regular caliper. Features: Fits most brands and adapts in seconds Fits most 4", 6", and 8" dial, digital and Vernier calipers All Part Hardened and ground Product includes: 2 Universal Caliper Bodies 4 Pair of Accessory Points 2 Flat 2 Conical 2 Stem 2 Ball End Allen Wrench Note: Caliper is not included

Manufacturer: JacobParts Inc. Brand: Delcast Model: V02

Delcast V02 Stainless Steel Digital Caliper provides instant and accurate readings of inside, outside, step, and depth measurements with accuracy to 0.001 inches, and 0.01 mm. SAE/Metric conversion switch automatically converts measurements to inches or millimeters with the simple press of a button. Adjustable thumbscrew provides tension for optimal movement of the slide and locks the jaws of the caliper in place. This caliper features an attractive, stainless steel finish and comes with a storage case and spare battery.FeaturesZero calibrationAutomatic On/OffRange: .01-150 mm / .001-6 inchesAccuracy: 0.02 mm / 0.001 inchesResolution: 0.01 mm / 0.0005 inchesAbout DelcastDelcast's mission is to provide a reliable and value-priced helping hand to comp-tech hobbyists, do-it-yourself consumers, and professional technicians alike. Behind every Delcast product is a commitment to strength, durability, and value. Each purchase is backed by a money-back guarantee and limited lifetime warranty. Your satisfaction is our promise.

Manufacturer: iGaging Brand: iGaging Model: 35-0917

Professional precision 2 in 1 digital indicator & depth gage 2 measuring tools in 1! this tool functions as an indicator or as depth gage! the 5 included extension Rods extend the measurement anywhere between 0 and 16 inch in 1 inch intervals to measure deeper. Features: includes 5 interchangeable depth Rods (1", 2", 3", 4 inch and 5") to extend the measuring depth to 16". reading functions: inch, metric, & fractional spring loaded movement for easy use as an indicator or depth gage large LCD display 4-48 thread interchangeable Carbide tipped point resolution: 0.0005"/.01mm/1/64" indicator travel: 1 inch measure range: 0 - 16"/400mm accuracy: 0.001 inch IP54 protection from fluids and dust.

Manufacturer: Hamuty Brand: Hamuty Color: Silver

Professional Quality Stainless Steel Digital Caliper Measurement in both SAE (inch) or Metric (mm) with conversion,Automatic turn-off function Power: One 1.5V LR44 button Cell (one cell included) with protective hard case and user instructions Measuring system: linear capacitive Features: 1. Highly polished surface, ensuring the accuracy. 2. Slide is smooth, no grittiness 3. Highly integrated circuit chip, Display is clear and stable. 4. Heavyweight, Rugged design 5. Hardened stainless measuring surfaces AND around LCD Display 6. Ergonomic thumb adjustment with textured grip 7. Lock screw to hold the slide in position 8. Zero at any position 9. Extra easy-to-read LCD, .44" high characters 10. Auto On 11. Automatic shut-off after 5 minutes of non use 12. Integrated depth rod 13. Precision Fit Slide for Smooth and Accurate Sliding Action 14. Exceptional Quality at a Reasonable Price What is in the box 1x 6" Digital Calipers 2x 1.5V LR44 button Cell 1x User Manual 1x Box Note: Accuracy affected in environment exceeding 80% relative humidity