Vernier Calipers - Page 55

Manufacturer: Vernier Calipers Brand: Vernier Calipers Color: Silver

Manufacturer: J-so Brand: J-so

Scale table can help you accurate identification of the measured data, and, to complete his work does not need to use battery, is environmental protection, energy saving.

Manufacturer: Robert Sorby Brand: Sorby

Hollow Vessel Calipers feature a unique shape that allows you to measure wall thickness in hard to reach areas, especially when working on narrow opening vessels. Measures 5" from pivot to point.

Manufacturer: Robert Sorby Brand: Robert Sorby

These new calipers are the answer to turning those long thin vessels and vases through a narrow opening. The shape of these calipers gives easy accessibility. Their double-ended design gives easy and reliable readings to enable a consistency of wall thickness in a turned piece.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-059-016-0

The Fowler 52-059-016 stainless steel inch/metric vernier caliper has a 6"/150mm measuring range, a 0.001"/0.02mm graduation, and four-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, grooves, and tube thicknesses, and depth and step measurements of bores and grooves. An extra-long vernier ensures accuracy. A depth rod can be read directly from the vernier scale. Sharp black graduations on a satin-finished bar ease reading, and a thumb lock holds the measurement in place for accurate reading. Raised sliding surfaces prevent wear of graduations for accuracy and long life. Ground and lapped measuring faces ensure accuracy and wear resistance. Hardened stainless steel construction provides durability and wear resistance. The caliper includes a fitted case. Vernier calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The main scale is engraved directly on the beam while the vernier scale is engraved on the slider mechanism. The base measurement is taken from the long beam, which provides the initial whole measurement in inches, centimeters, or millimeters. To obtain the total measurement, the base reading is added to the vernier scale reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital and dial calipers, vernier calipers are more durable because they do not have internal moving parts, and are less prone to inaccuracy caused by shock, debris, and other contaminants, but they can be more difficult to read than digital...

Manufacturer: uxcell Brand: uxcell Model: a11092300ux0017

The vernier calipers incorporates a main scale and a sliding vernier scale, This instrument may be used to measure outer dimensions of objects (using the main jaws), inside dimensions (using the smaller jaws at the top), and depths (using the stem).Calipers with a dial are much easier to read than the old dial-less slide vernier calipers.Very useful in measuring beads, jewelry or other small items, also can be used in many other trades.

Manufacturer: Starrett Brand: Starrett Model: 1025-6

The Starrett 1025-6 stainless steel pocket slide caliper fits easily in a shop coat pocket and is precise to 1/64” for quick yet precise measurements. Readings are made directly from two lines marked “in” and “out” on one side of the caliper stock. The outside range is 0 to 4-3/4” while the inside range is 1/4 to 5”. The back of the caliper stock has an inch scale to allow the caliper to be used as a steel rule as well, for easy and fast estimation of rough measurements. The knurled thumb piece activates the slide, while the slide stop prevents the tool from being disassembled. The clamp screw has a left-hand thread for easy one-hand operation. The jaws have a straight measuring surface for outside measurements and rounded nibs for inside and hole measurements. The jaws are 1-3/8” deep, while the closed nibs are 1/4” wide. The graduations on the stock are in 1/32” increments, while the graduations on the slide are in 1/32” and 1/64” increments. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the readi...

Manufacturer: uxcell Brand: uxcell Model: a12051100ux0319

External and inner diameter can be measure by this slide caliper. Very useful in measuring cemstones, beads, jewelry making, also can be used in many other trades Plus a locking pin to secure readings and knurled thumbwheel on the Vernier Caliper permits fast, easy measuring. Come with blue plastic case with sponge protect the caliper well.

Manufacturer: SODIAL(R) Brand: TOOGOO(R) Color: black

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) Black Hard 150mm Electronic Digital LCD Plastic Vernier Caliper MicrometerProduct DescriptionWith easy to read large LCD display Minimum scale to read is 0.1mm / 0.01 inch An ideal tool for a broad range of industrial and automotive applicationsSpecification: Measuring Range: 0-150 mm / 0-6 inch Resolution: 0.1 mm / 0.01 inch Repeatability: 0.1 mm / 0.01 inch Maximum Measuring Speed: 1.5 m / sec or 60 inch / sec Display: LCD screen Power: One Battery (Not included)Main Color: Black Quantity:1 PcPackage includes: 1 X Electronic Digital CaliperNote:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is 1-3 cm.

Manufacturer: Empire Level Brand: Empire Level Model: 2784

7 1/8in.-long stainless steel body with 4 3/4in. (120mm) capacity by 1/6in. (1/10 mm). Friction-stop roller and thumbscrew lockout. Makes 3-way measurements: inside, outside and depth. Caliper Type: Vernier, Jaw Size (in.): 4 3/4, Material: Stainless steel, Range (in.(mm)): 1/6 in. (1/10 mm), Length (in.): 7 1/8, Display Type: On handle, Measures: Inside, outside, depth, Case Included: No, Single, Pair, or Set: Single, Capacity: 4 3/4 in. (120mm)