ETCR6000 Digital Clamp Leakage Current Meter Measurement Range: 0mA-60.0A AC/DC

The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments.

Technical Specifications
Function: Measurement of AC/DC current, leakage current
Power Supply: 6F22,9V
Test Mode: Clip-on CT, integral mode
Clamp Size: Φ7mm
Measurement Range: 0mA-60.0A AC/DC
Resolution: 1mA AC/DC
Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh)
Display Mode: Four digits LCD display
Sampling Rate: 2 times/s
Frequency: AC: 45Hz-400Hz
Polarity Indication: DC current auto identified and display"-"
Test Position: Tested wire in the jaw center
Line Voltage: AC600V
RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC
Com-Configure:Baud rate: 9600, data bit:8, stop bit:1
Data Memory: 99units, FULL blinks when the memory is full
Reading Hold: DH indicating the reading is hold
Out of Range: OL indicating the current is out of range
Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Working Current: 10mA
Consumption: 10mW
Working Temperature and Humidity: -10℃-50℃,below 80%rh
Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg
Storage Temperature and Humidity: -10℃-60℃,below 70%rh
Insulating Strength: AC2kV/rms (between the alloy of the clamp and the housing)
Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT â…¢(600V)