ETCR6600 Clamp Leakage Current Meter AC leakage Measurement Current Testing On-line AC current measurement with RS232 Interface

Technical Specifications
Function: AC leakage measurement, AC current measurement, On-line AC current measurement
Power Supply: 6LR61,9V
Process Type: Clamp CT, Integral Approach
Display Type: 4 Digits LCD
Clamp Size: 35mm×40mm
Meter Dimension: LWH: 175mm×70mm×38mm
LCD Dimension: m35mm×21.5mm; Display Dimension: 32mm×15mm
Sampling Rate: 2 Times/Second
Frequency: 50Hz, 60Hz Automatic identification
Shifting: Automatic Shift
Range: 0.0mA-600.0A
Resolution: 0.1mA
Accuracy (23c±3c, below 70%RH): 0.0-60A:±1.5%±5dgt; 60A-200A:±2%±5dgt ; 200A-300A: ±3%±5dgt; 300A-600A: ±4%±5dgt
Line voltage: Below AC 600V
RS232 Interface: With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring
Data Memory: 99 sets, "FULL"Blinking when memory is full
Peak Maintaining: Peak value capture hold function, press HOLD without Release to display peak value
Reading Hold: Reading hold function: "DH" symbol display
Overflow display: Range overflow function: "OL" symbol display
Automatic Shutdown:5 minutes after the boot
Battery Detection: When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement.
Rated Power: 5mW
Working Temperature and Humidity:0℃～40℃；; below 80%rh
Storage Temperature and Humidity: -10℃～60℃ below 70%rh
Insulation Strength: AC2kV/rms (between core and box)
Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V)
Accessories: Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;Meter bag: 1 piece