Current Clamps - Page 3

Manufacturer: TED Brand: The Energy Detective Model: CT301C

The CT301C are TED Pro Current Transformers that are 400A Standard Split Core CTs. TED Pro Current Transformers. 400A. Standard Split-Core CT.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: ADM3201

The ADM3201 is a digital multimeter designed for automotive technicians making essential diagnostic measurements in today's automotive applications. UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4637362

Fluke 36 inch iFlex flexible current probes expand the measurement range to 6000A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the energy logger, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft.) cord allows separation between the measurement location and the energy logger making it easier to view the display.

Manufacturer: Amprobe Brand: Amprobe Model: AM-FLEX33

The Amprobe AM-Flex33 is a flexible current transducer that measures current up to 3,000 amp without touching or interrupting the circuit. The transducer can be bent to attach to conductors that rigid clamp-on transducers cannot reach, and it can accommodate conductors up to 7" (178 mm) in diameter. The AM-Flex33 is for use with the Amprobe DM-II or DM-III power quality analyzers.Industrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.

Manufacturer: Amprobe Brand: Amprobe Model: SC-5000

The Amprove SC-5000 signal clamp attaches around a metallic buried pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. Unlike clips or clamps, it does not require direct contact with metal to transmit the signal. It can transmit a signal through insulation on wires and does not require wire or cable bundles to be split. The SC-5000 signal clamp provides more accurate tracing than when locating with just a receiver and transmitter. The clamp accommodates conductors up to 4" in diameter. It transmits a 9.82 or 82.488 kilohertz (kHz) frequency supplied by the T-5000 transmitter (not included) and is for use with the Amprobe AT-5000 and AT-5005 and pipe and cable locating systems.Pipe and cable locators, also called utility locators, find pipes, cables, and wires that are buried in the ground for determining where to excavate on a site and for locating buried fixtures in need of maintenance or replacement. Pipe and cable locators are used in electrical, plumbing, telecommunications, utility maintenance, construction, and home repair applications. They have a transmitter and a receiver and use active or passive methods of location. In active location, the transmitter induces a signal at a specific frequency either into the ground, where it's picked up by buried utilities, or directly into a pipe, cable, or wire that is connected to the transmitter. As the signal is being transmitted into the buried utility, the receiver is passed over an area until it detects the signal and locates the buried pipe, cable, or wire. In passive location, the receiver searches for alternating current (AC) frequencies or radio waves emitted by energized cables, wires, and pipes without the need for a transmitter. Pipe transmitters, signal clamps, and grounding stakes can be used to help improve locator accuracy.Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.

Manufacturer: HOBART Brand: Hobart Model: HB274227-2

SPECIFICATIONS Height (Inches): 0.05 Width (Inches): 1.44 Length (Inches): 1.44 Weight (Lbs): 0.5 Haz Material: No Freight: No Returnable: Yes

Manufacturer: Vetus Brand: ETCR

Technical Specifications Function: AC leakage measurement, AC current measurement, On-line AC current measurement Power Supply: 6LR61,9V Process Type: Clamp CT, Integral Approach Display Type: 4 Digits LCD Clamp Size: 35mm×40mm Meter Dimension: LWH: 175mm×70mm×38mm LCD Dimension: m35mm×21.5mm; Display Dimension: 32mm×15mm Sampling Rate: 2 Times/Second Frequency: 50Hz, 60Hz Automatic identification Shifting: Automatic Shift Range: 0.0mA-600.0A Resolution: 0.1mA Accuracy (23c±3c, below 70%RH): 0.0-60A:±1.5%±5dgt; 60A-200A:±2%±5dgt ; 200A-300A: ±3%±5dgt; 300A-600A: ±4%±5dgt Line voltage: Below AC 600V RS232 Interface: With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory: 99 sets, "FULL"Blinking when memory is full Peak Maintaining: Peak value capture hold function, press HOLD without Release to display peak value Reading Hold: Reading hold function: "DH" symbol display Overflow display: Range overflow function: "OL" symbol display Automatic Shutdown:5 minutes after the boot Battery Detection: When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Rated Power: 5mW Working Temperature and Humidity:0℃～40℃；; below 80%rh Storage Temperature and Humidity: -10℃～60℃ below 70%rh Insulation Strength: AC2kV/rms (between core and box) Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V) Accessories: Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;Meter bag: 1 piece

Manufacturer: Vetus Brand: ETCR Model: ETCR6000

The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. Technical Specifications Function: Measurement of AC/DC current, leakage current Power Supply: 6F22,9V Test Mode: Clip-on CT, integral mode Clamp Size: Φ7mm Measurement Range: 0mA-60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh) Display Mode: Four digits LCD display Sampling Rate: 2 times/s Frequency: AC: 45Hz-400Hz Polarity Indication: DC current auto identified and display"-" Test Position: Tested wire in the jaw center Line Voltage: AC600V RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate: 9600, data bit:8, stop bit:1 Data Memory: 99units, FULL blinks when the memory is full Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current: 10mA Consumption: 10mW Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC2kV/rms (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Vetus Brand: ETCR Model: ETCR6200

It could be widely use in those fields as car repair, car leave factory test, car parts test, the current detection in telecommunication room, electric power overhauling, meteorology, oil detection, etc. Technical Specifications Function: Measurement of AC/DC current, leakage current, repairing the car circuit.  Power Supply: Zn-Mn dry battery,6F22,9V, continuous use for 30h Test Mode: Clip-on CT, non-contact measurement Clamp Size: 25mmX35mm Measurement Range: 0mA-60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh) Display Mode: Four digits LCD display Sampling Rate: 2 times/s Frequency: AC: 45Hz-400Hz Polarity Indication: DC current auto identified and display"-" Test Position: Tested wire in the jaw center Line Voltage: AC600V RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate: 9600, data bit:8, stop bit:1 Data Memory: 99units, FULL blinks when the memory is full Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current: 10mA Consumption: 10mW Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC 3700V/rms. (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Vetus Brand: ETCR

Technical Specifications Function: DC leakage current measurement, DC current measurement,Automobile leakage maintenance Power Supply: 6F22,9V Process Type: Clamp CT Display Type: 4 Digits LCD Clamp Size: 25mm×30mm Meter Dimension: LWH: 175mm×70mm×38mm LCD Dimension: 35mm×21.5mm; Display Dimension: 32mm×15mm Sampling Rate: 2 Times/Second Shifting: Automatic Shift Range:0.0mA～6.00A DC Resolution: 0.1mA DC Accuracy ( 23°C±3°C, below 70%RH): 0.0mA~300.0mA DC: ±2%rdg±5dgt; 0.30A~6.00A DC: ±2%rdg±5dg tLine voltage: Below 600V DC USB interface: With USB interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory: 99 sets, "FULL" Blinking when memory is full Peak Maintaining: Peak value capture hold function, press HOLD without Release to display peak value Reading Hold: Reading hold function: "DH" symbol display Overflow display: Range overflow function: "OL" symbol display Automatic Shutdown: 5 minutes after the boot,auto shutdown to reduce battery consumption Battery Detection: When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Working Temperature and Humidity: -10℃～50℃; below 80%rh Limit Temperature Error: -10℃～0℃ and 40℃～50℃,Maximum error increase 2%rdg Storage Temperature and Humidity: -10℃~60℃; below 80%rh Insulation Strength: AC3700V/rms (between core and box) Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) Accessories: Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece; bag 1 piece