Current Clamps - Page 6

Manufacturer: Hioki Brand: Hioki Model: 9691

Rated current: AC/DC 100 A. Output voltage: AC/DC 1 V/100 A. Maximum peak current value: 150 A. 3 Years warranty.

Manufacturer: Fisher Labs Brand: Fisher Labs

Coupling Clamp 3" (82kHz only)

Manufacturer: Vastar Brand: Vastar

Digital Clamp Meter makes home electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can easil extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic clamp for safer handling when measuring. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses. Test fuses, appliance power consumption, and outlets with auto ranging freedom. Test voltage, resistance, diode, and continuity with a single flip of the rotary switch. The eliminates guesswork and shortens the steps to get the job done. Measure the max output for any testable source with a press of a button. When you get the number you need, press the hold button to lock the reading on the LCD display for your convenience. The device includes a lightweight portable carry pouch for convenient storage and handling. With a max capacity of 600V and auto ranging convenience, it can help to get the job done easier, safer, and faster. Features: LCD screen size:36x19mm Max Display value:1999 Auto ranging: yes Low battery indication: displayed Over-range indication: displayed Diode test: yes Continuity test and buzzer sound: yes Data-hold: yes Jar opening diameter:?25mm Battery type:1.5Vx2, AAA size Dimension(H*W*D):213x52x31mm Weight: approx 190g(battery not included) Package included: 10 x Vastar Digital Clamp Meter 20 x Test Lead 10 x Temperature Probe 20 x Batteries 10 x User Manual 10 x Black Bag Warranty: 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24 hours.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8147

Kyoritsu 8147 leakage and load current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 70A AC. 40mm conductor size. Output voltage: AC 3500mV/70A (AC 50mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 100 ohm output impedance. Accessories includes: portable case, instruction manual, cable marker. Measures 128 mm length by 81 mm width by 36mm depth.

Manufacturer: Honeywell Brand: Honeywell

Honeywell 04905-X50-33-333-X1-000-000 Conductivity Cell

Manufacturer: Fluke Corporation Brand: Fluke Model: 3345753

Fluke 1 phase mini current clamp set for power quality logger. 1A/10A Current.

Manufacturer: Fluke Corporation Brand: Fluke Model: I5S

Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers. Compact shape makes transporting and storing convenient. Take accurate readings without breaking the circuit. CAT III 600 V (For insulated conductors only). Nominal current range: 5A. Continuous current range: 10mA to 6A. Maximum non-destructive current: 70A. Lowest measurable current: 10mA. Basic accuracy: 10mA to 1A: 1 percent + 5 mA, 1A to 5A: 1 percent. Useable frequency: 40 Hz to 5 kHz. Output levels: 400 mV/A. Input load impedance: greater than 1 mega ohm in parallel with up to 47 pF. Crest factor: less than or equal to 3, add 0.7 percent to accuracy. Safety: CAT III 600V per IEC/EN61010-1, Pollution Degree 2. Maximum voltage: 600V AC. Maximum conductor diameter: 15mm. Output cable length: 2.5m. With BNC adapter. Measures 116mm length by 43mm width by 23mm height.

Manufacturer: FLUKE CORPORATION Brand: Fluke Corporation

I1010/ Ac/Dc Current Clamp 1000A Dc 600A-2Pack.

Manufacturer: Fluke Brand: Fluke Model: 773

EXCLUSIVELY FROM TRANSCAT - The Fluke 773 milliamp process digital clamp-meter is a manual-ranging meter for measuring DC milliampere (mA) and DC voltage output signals of 24V loop circuits. It has a clamp that measures DC to 100mA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or interrupting the circuit, and has a 1m extension cable so it can detach from the meter body for hard-to-reach applications. A set of test leads is included for measuring DC to 24mA and DC voltage to 30V. The meter can source and simulate DC signals up to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA. It has an LCD that shows both milliamp readings and percent of 4 to 20mA span, and a backlight for visibility in low light that turns off automatically after two minutes. An LED at the top of the meter body can be illuminated to aid visibility of wires in dark enclosures. The meter features a built-in 24V loop power supply for powering a transmitter and measuring its milliampere output signal, and a scaled milliampere output for connecting to a logging device (sold separately) to record measurements. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on four 1.5V AA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.

Manufacturer: STAR Brand: Star Model: 26-2071

Thermostat Bulb Clamp Star Fryers Specifications Ship Weight: 0.13 lbs