Current Clamps - Page 9

Manufacturer: Motionics Brand: Motionics Model: WiClamp-M

Wireless current measurement kit consists of an AC current transducer and the WiClamp base. It is able to measure the TRUE RMS value of current in a cable and transmit measurement results wirelessly via Bluetooth Low Energy. Our free iPad App BlueClamp can simultaneously receive and display data from multiple WiClamp bases, turning the iPad into a multi-line current monitoring device. Specifications: WiClamp Base Dimension: 60 x 36 x 15 mm Transducer Dimension: 64 x 143 x 30 mm Measurement Range: 1-115 A RMS (10 mV/A), 1-400 A RMS (1 mV/A) Resolution: 0.3A (10 mV/A), 3A (1 mV/A) Working Voltage: 600 V CAT II Wireless Working Range: up to 10 m Operating Temperature: 0-50 ?C Battery: 350 mAh rechargeable Charging: 5 VDC USB This item is built and shipped from TX, USA

Manufacturer: UEi Test Instruments Brand: UEI Test Equipment Model: UTLDM1

ETL Listed IEC61010-1 CAT III 600V 1 Year Limited Warranty DC Voltage 2V ~ 600V AC Voltage 200V~600V DC Current 20mA~10A Resistance Diode Temperature -4DegreeF ~ 1832DegreeF Continuity < 60Ω Battery test 1.5V, 9V, 12V.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8143

Kyoritsu 8143 leakage current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 1000mA AC. 68mm conductor size. Accuracy: +/- 1.0 percent rdg +/- 0.1mV (50/60Hz), +/- 2.0 percent rdg +/- 0.1mV (40Hz to 1kHz). Output voltage: AC 100mV/1000mA (AC 100mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 120 ohm output impedance. Accessories includes: portable case, instruction manual. Measures 186 mm length by 129 mm width by 53mm depth.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8128

Kyoritsu 8128 load current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. High efficiency on the test terminal in power distribution facilities. Rated current 5Amp AC. 24mm conductor size. Output voltage: AC 50mV/5A[Max. 500mV/50A] (AC 10mV/A). Accuracy: +/- 0.5 percent rdg +/- 0.1mV (50/60Hz), +/- 1.0 percent rdg +/- 0.2mV (40Hz to 1kHz). Phase shift within +/- 2.0 degree. Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 3m cable length. Approximate 20 ohm output impedance. Accessories includes: portable case, instruction manual, cable marker. Measures 100 mm length by 60 mm width by 26mm depth.

Manufacturer: UEi Brand: UEi Test Instruments Model: DL379KIT

5 function - 24 ranges | An all-purpose clamp-on multimeter | Auto and manual ranging | Min/max with time stamping | Audible continuity beeper | Data hold and range hold | Micro amp (DC) ranges for flame safeguard measurement | High voltage protection | Easy-to-read LCD display | Includes: test leads, 9V battery, thermocouple module and clip-on holster - Manufacturer: Universal Enterprises Inc.

Manufacturer: Hioki Brand: Hioki Model: 9695-03

Measurable conductor diameter: 15mm. Primary current rating: AC 100A. Output voltage: AC 1mV/A. Accuracy Amplitude (45 to 66 Hz): +/-0.3 percent rdg. +/-0.02 percent f.s. Accuracy Phase (5Hz to 5kHz): within +/-1 degree. Frequency characteristic (accuracy deviation): within +/-1.0 percent at 40Hz to 5kHz. Maximum rated voltage to earth(insulated conductor): 300Vrms. Maximum allowable input (45 to 66 Hz): 130A continuous. Measures 51mm width by 58mm height by 19mm depth.

Manufacturer: Fluke Brand: Fluke

The Fluke i17XX-FLEX1500 12 inch iFlex flexible current probes measure to 1500A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the 173X Energy or Power Logger, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the energy logger making it easier to view the display.

Manufacturer: Hioki Brand: Hioki Model: 9660

Clamp on sensor for the power quality analyzer 3169 and 3196. Sensor is designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 100 A AC. Rated output current 0.1 V AC. Accuracy (at 45/66 Hz) amplitude: +/-0.5 percent rdg. +/-0.2 percent f.s. Full scale (f.s.) is the 3196 value. Phase: +/-0.5 or less. Frequency characteristics 66 Hz to 5 kHz (+/-1 percent or less from accuracy). Maximum allowable input continuous 130 A rms (45 to 66 Hz). Maximum circuit voltage 300 V AC rms (insulated wire). Core jaw diameter: 37/64". Measures 1-51/64" width by 5-19/64" height by 53/64" depth. Cord length: 9-53/64'.

Manufacturer: Hioki Brand: Hioki Model: 9290-10

Measurement range 0 to 1000 A AC (50/60 Hz, continuous use), Maximum 1500 A AC (50/60 Hz, 5 minutes or shorter) CT ratio 10 : 1. Accuracy (at 45 to 66 Hz) Amplitude: +/-1.5 percent rdg. at primary current 10 to 1500 A. Phase: +/-1.0 degree max. at primary current 10 to 1500 A. Frequency characteristics Amplitude: 40 to 1 kHz / +/-1 percent rdg. , 20 to 4 kHz / +/-2.5 percent rdg. Phase: 40 to 1 kHz / +/-1.0 degree max. , 20to 4 kHz / +/-3.0 degree maximum. Max. circuit voltage 600 V AC rms (insulated wire). Core jaw diameter 2-5/32" or 3-9/64" width busbar. Secondary core diameter 1-3/64" by 1-3/64". Dimensions 3-57/64" Width by 7-5/8" height by 1-19/64" depth, 3m cord length. Accessories Mark band (6). 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3949761

Fluke 5A clamp-on current transformer for 1750 3 phase power quality recorder.