Current Clamps - Page 5

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8148

Kyoritsu 8148 leakage and load current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 100A AC. 68mm conductor size. Output voltage: AC 5000mV/100A (AC 50mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 60 ohm output impedance. Accessories includes: portable case, instruction manual, cable marker. Measures 186 mm length by 129 mm width by 53mm depth.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CTM-58

Grounding clamps. Attaches to diameters up to 1-3/8". Screw connection. Made of steel with zinc plated. Current max: 50A. RoHS (2002/95/EC) compliant.

Manufacturer: AKTAKOM Brand: AKTAKOM Color: Yellow

AKTAKOM ACM-2025 uses the fork current sensing structure making current measurement, it is not necessary to open the jaws as working with traditional clamp meters that provides easy operation.

Manufacturer: Fluke Corporation Brand: Fluke Model: I200S

Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Companion to your ScopeMeter, power quality meter or digital multimeter to measure up to 200A AC. Included adapter for DMM's. Two ranges: 20 A and 200A, 10 or 100 mV/ Amp output. Take accurate current readings without breaking the circuit. Maximum conductor diameter 20mm. CAT III 600V safety rating. Nominal current range: 20A, 200A. Continuous current range: 0.1A - 24A, 0.5A - 200A. Maximum non-destructive current: 240A. Lowest measurable current: 0.1A. Basic accuracy: 1.5 percent +0.5 A (48-65 Hz) (percent reading + floorspec). Useable frequency: 40 Hz - 10 kHz. Output levels: 100 mV/A, 10 mV/A. Maximum conductor size (busbar): 20 x 5mm. Output cable length: 2.0m.

Manufacturer: Motionics Brand: Motionics Model: WiClamp

Wireless current measurement kit consists of an AC current transducer and the WiClamp base. It is able to measure the TRUE RMS value of current in a cable and transmit measurement results wirelessly via Bluetooth Low Energy. Our free iPad App BlueClamp can simultaneously receive and display data from multiple WiClamp bases, turning the iPad into a multi-line current monitoring device. Specifications: WiClamp Base Dimension: 60 x 36 x 15 mm Transducer Dimension: 64 x 143 x 30 mm Measurement Range: 1-115 A RMS (10 mV/A), 1-400 A RMS (1 mV/A) Resolution: 0.3A (10 mV/A), 3A (1 mV/A) Working Voltage: 600 V CAT II Wireless Working Range: up to 10 m Operating Temperature: 0-50 ?C Battery: 350 mAh rechargeable Charging: 5 VDC USBThis item is built and shipped from TX, USA

Manufacturer: GROEN Brand: Groen Model: GRO012844

SPECIFICATIONS Height (Inches): 0.5 Width (Inches): 2.0 Length (Inches): 3.0 Weight (Lbs): 0.6 Haz Material: No Freight: No Returnable: Yes

Manufacturer: UEi Test Instruments Brand: UEI Test Equipment Model: UTLDM2 Color: Multicolored

Operating Category: 600V CAT III, pollution degree: 2.Operating Elevation (> 2000 m)Operating Conditions: 32~104DegreeF (0~40DegreeC), >80% RH (do not use meter when temperature >10DegreeC).Storage Conditions: 14~140DegreeF (-10~60DegreeC), >70% RH (remove the battery).Temperature Coefficient: 1x Accuracy/DegreeC (>18DegreeC or

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DM383B

UEi Test Instruments designed the DM383B Digital Multimeter to set a new standard for a practical, every-day test and measurement tools. The large backlit display makes the DM383 easy use in the most challenging of environments. The protective rubber boot keeps the meter safe against normal wear and tear. The UEi DM383B measures 750ACV, 1000DCV, 10ACA and DCA, Resistance to 40M?, and provides an easy audible test for continuity. The UEi DM383B also includes Data Hold and Peak Hold and is safety-rated to CATIII 600V. The UEi DM383B is supplied with ATL55 Test Leads, Fuses and Alligator Clips.

Manufacturer: UEi Brand: UEi Test Instruments Model: DL389 Color: Multicolored

UEi Test Instruments designed the DL389 to offer professionals the most complete TRMS clamp-on meter. Designed for the real world, the DL389 includes a dual display for simultaneous measurement, worklight, backlit displays, magnetic mount for hands-free operation, user temperature calibration, built-in test lead storage, and an input jack lock for safety. The DL389 measures 750VAC/1000VDC, 400A AC, Temperature, Capacitance, Resistance, Continuity, Frequency, Duty Cycle, and micro-Amps. Safety rated to CATIII 600V and UL approved. Combine the DL389 with the optional CH3 for safe and unique measurement in hard-to-reach locations.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8123

Kyoritsu 8123 AC load current clamp sensor. Conductor size: 55mm. Rated current: 1000A AC. Output voltage: AC 500mV/1000A (AC 5mV/A). Accuracy: +/-2.0 percent rdg +/-0.3mV (50/60Hz), +/-3.0 percent rdg +/-0.5mV (40Hz-1kHz). Withstand voltage: AC 5350V for 5 seconds. Cable length: approximate 2m. Output connector: Mini-DIN 6-pin. Operating temperature ranges: 0-40 degree C, less than 85 percent RH (without condensation). Output impedance: approximate 9.5 ohms. Applicable standards: IEC 61010-1:2001, IEC 61010-2-032:2002, CAT III 600V pollution degree 2. Accessories: 9095 (portable case), instruction manual, cable marker. Measures 170-mm length by 105-mm width by 48-mm depth.