|
|
-
4.6 of 5.0 with 347 Reviews
SALE PRICE: $153.65 24% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 324
Color: Multicolored
Manufacturer: Fluke
Brand: Fluke
Model: 324
Color: Multicolored
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.
-
4.6 of 5.0 with 391 Reviews
SALE PRICE: $156.44 22% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: T5-H5-1AC KIT/US
Color: T5-H5-1AC Electrical Tester Kit
Manufacturer: Fluke Corporation
Brand: Fluke
Model: T5-H5-1AC KIT/US
Color: T5-H5-1AC Electrical Tester Kit
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $159.99 21% OFF
Manufacturer: Extech
Brand: Extech
Model: MA1500
Manufacturer: Extech
Brand: Extech
Model: MA1500
What's Included: One set of test leads, type-K bead wire temperature probe (-58 to 482¢ªF/-50 to 250¢ªC), one 9 V battery, and carrying case. Integrated Noncontact voltage detector quickly checks for the presence of live wires before testing True RMS for accurate readings of non-sinusoidal waveforms Built-in non-contact Voltage detector with LED alert 2.0" (52mm) jaw size for conductors up to 500MCM Dual 40,000/4000 count, backlit LCD display Includes Multimeter functions Inrush function captures transients during motor startups Relative mode for capacitance zero and offset adjustment Data hold, peak hold, min/max, and auto power off
-
4.6 of 5.0 with 47 Reviews
SALE PRICE: $164.60 22% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: 4560562
Manufacturer: Amprobe
Brand: Amprobe
Model: 4560562
AMP-320 600A AC/DC Motor Maintenance True-RMS HVAC Clamp Meter with Motor Rotation, 1 and 3-phase sequence testing, inrush current monitoring, temperature, DC Micro amps, capacitance, low pass filter, Amp-Tip, NVC, CAT III 600 V.
-
4.6 of 5.0 with 13 Reviews
SALE PRICE: $173.32 14% OFF
Manufacturer: FLIR Systems, Inc.
Brand: Extech
Model: MA3018
Manufacturer: FLIR Systems, Inc.
Brand: Extech
Model: MA3018
The MA3018 is a 3000A True RMS AC Flex Clamp Meter. The MA3018 features an 18 inch flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating.
-
4.6 of 5.0 with 40 Reviews
SALE PRICE: $180.00 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700SC
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700SC
The Fluke 700SC 667425 serial interface cable assembly plugs into the pressure module connector of a process calibrator and terminates in a DB-9 connector which plugs directly into a PC serial port, enabling the user to control the instrument from the computer. The cable is compatible with Fluke 725, 725EX, and 726 series process calibrators. A computer cable is used to connect a meter to a printer for compatibility between objects for scientific and computing devices in a variety of lab, field, office, and home uses.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
-
4.6 of 5.0 with 26 Reviews
SALE PRICE: $180.00 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-G
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-G
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
-
4.6 of 5.0 with 41 Reviews
SALE PRICE: $183.44 4% OFF
Manufacturer: Megger
Brand: Megger
Model: 1000-305
Manufacturer: Megger
Brand: Megger
Model: 1000-305
|
The Megger DCM340-EN digital clamp meter is an average-sensing multimeter for measuring current, voltage, resistance, and frequency in electrical testing applications. It has a clamp with two jaws that can close around an electrical conductor up to 1.3" (35 mm) in diameter to measure current without touching or interrupting the circuit. The meter comes with detachable test leads that measure voltage, resistance, and frequency. The peak + or - function records instantaneous peak positive or negative values for current and voltage. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps a reading on the display, even after the meter is disconnected. The meter's liquid crystal display (LCD) shows readings in digits and on a bar graph and is backlit to provide readability in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. The meter can survive falls of up to 1.2 meters to a hardwood or concrete floor.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service pan...
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $185.61 1% OFF
Manufacturer: Morris
Brand: Morris
Manufacturer: Morris
Brand: Morris
Cat III 1000A Digital Clamp Meter with Temperature Probe - Heavy duty 1000A Clamp Current Meter.Cat III 1000A Digital Clamp Meter with Temperature Probe features include: Conforms to IEC61010-1 Cat III Display: (3) 1/2" Digit LCD, Max. 1999 counts Data hold function Back light function DC voltage: 1000V ±1.0% AC voltage: 750V ±1.0% AC current: 20A/200A/1000A ±2.0% 1000A Clamp Current Meter Resistance: 200/2000 ohms ±1.0% Temperature Range: -40°F to 1350°F (-40°C to 732°C) ±1.0% Fast Continuity Beeper Diode Test 1000A Clamp Current Meter Jaw Opening to 1.66†max. Order Qty of 1 = 1 Piece Below is more info on our Cat III 1000A Digital Clamp Meter with Temperature Probe
-
4.6 of 5.0 with 25 Reviews
SALE PRICE: $195.32 1% OFF
Manufacturer: Reed
Brand: Reed Instruments
Model: C-212
Manufacturer: Reed
Brand: Reed Instruments
Model: C-212
|
The Reed C-212 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 40mm (1.57 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750(V, DC voltage to 1,000V, voltage frequency to 10kHz (kilohertz), and resistance to 4,000Ω (ohms). Frequency of the current can be measured with the clamp. The meter has a rotary switch to select the property to measure, and a 3,999-count LCD that shows readings numerically and in a 42-segment bar graph. Its relative function allows a measurement to be set as a reference value, and it displays the subsequent measurements as positive or negative deviations from that value. The peak hold function records the maximum and minimum readings for voltage and current during a 1ms (millisecond) sampling time. The maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects th...
|
|