Clamp Meters - Page 32

Manufacturer: Fluke Corporation Brand: Fluke Model: IR189USB

USB cable adapter for Fluke-189/FVF2 kit.

Manufacturer: Fluke Brand: Fluke Model: FLK-PC3000 FC

' PC Adapter, For Use With FC3000 Series Multimeter , FC Series Modules, Features Wireless Communication, Includes Windows Software CD, Manufacturers Warranty Length 1 yr. '

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-100

The Amprobe ACDC-100 digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a Hall effect clamp that measures alternating current (AC) to 800 amp and direct current (DC) to 1,000 amp. The meter comes with detachable test leads that measure DC voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 2" (50 mm) in diameter to measure current without touching or interrupting the circuit. The inrush reading displays measurement of entire motor inrush period at startup. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter has an impact- and wear-resistant molded rubber body with a probe holder. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range f...

Manufacturer: Hioki Brand: Hioki Model: LR5051-20

Easily mount the light-weight, pocket-sized loggers in tight spaces. Easy-to-see dual display. Transfer data to PC even during recording. Replace batteries while recording. Record 60,000 data per channel. Record without missing fluctuations in STAT mode. Measurement data is preserved even after the battery dies. Worry-free backup preserves recorded data even if a new measurement is started by mistake. Record load current of 50Hz/60Hz lines record leak current. Measurement items AC current. Measurement range: When Using clamp on sensor 9669: 1000A range, CT6500: 50 to 500 A range, 9695-02: 5 to 50 A range, 9675: 500mA to 5 A range, 9657-10: 500 mA to 5 A range. Basic accuracy: +/-0.5 percent rdg, +/-5dgt. Operating temperature and humidity: -0 degree C to 50 degree C, 80 percent rh or less. Measures 3-7/64" width by 2-3/4" height by 1-29/64" depth. Approximate 1 years (1 minute recording interval, power-saving mode, Instantaneous recording, environmental temperature 20 degree C) and Approximate 1 months (1 seconds recording interval, power-saving mode, Instantaneous recording, environmental temperature 20 degree C). Accessories: AA alkaline battery 1.5V (2), instruction manual, operation manual.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP190

Designed for use with the Fluke ScopeMeter 190 and 190C series, the Fluke BP190 rechargeable NiMH battery pack, this set of NiMH batteries has to be charged in the instrument. 7.2V Nominal voltage. 3,500 mAh capacity.

Manufacturer: Ruby Electronics Brand: Ruby Electronics Model: DT-3347 Color: Dark Gray & Yellow

This is a brand new CEM DT-3347 CE certified digital clamp-on AC/DC meter. DT-3347 Professional True RMS Clamp Meter provides accurate AC/DC Current and Voltage readings regardless of waveforms. This meter should be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform. This meter is CAT III 600V rated. It also measures capacitance, frequency, resistance and temperature. It comes with a heavy duty carrying case to protect your device when working in the field.

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-100 TRMS

The Amprobe digital clamp meter is auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a Hall effect clamp that measures alternating current (AC) to 800 amp and direct current (DC) to 1,000 amp. The meter comes with detachable test leads that measure DC voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 2" (50 mm) in diameter to measure current without touching or interrupting the circuit. The inrush reading displays measurement of entire motor inrush period at startup. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly.

Manufacturer: Extech Instruments Brand: Extech Model: EX810 Color: Multicolor

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer Compact and powerful, the Extech EX810 1000-Amp AC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. The EX810 measures AC/DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also includes a built-in, non-contact infrared thermometer that allows you to detect invisible hot spots. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation.1000A AC Clamp Meterwith IR ThermometerAt a Glance:Accurately makes a variety of electrical measurementsBuilt-in non-contact infrared thermometer for finding invisible hot spotsLarge LCD screen and backlit display for easy viewingErgonomic design and durable housing for one-handed operation and durabilityOne-year limited warranty on parts and laborEX810 clamp-on multimeter with built-in InfraRed Thermometer is ideal for industrial applications. View larger.Multipurpose Meter in One Convenient DeviceThe Extech EX810 offers multiple functions so service technicians can carry one meter into the field instead of several. This device measures AC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity. Its wide-opening, 1-7/10- inch circular jaw fits around conductors up to 750 MCM, or two 500 MCM. The EX810 also features min/max, as well as data and peak hold of current surges during motor startup and other transience that "freezes" data in the display. Additionally, there is auto-ranging with manual override.Built-In, N...

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 350B

The BK Precision model 350B allows for non invasive current measurements. It measures AC current up to 1000A, AC voltage to 750V, DC voltage to 1000V and resistance to 30 MΩ.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-50NAV

Amprobe ACD-50NAV CAT IV Navigator Clamp-On Meter 600A with VolTect Non-Contact Voltage Detection The ACD-50NAV is packed with advanced features to aid troubleshooting.View larger Check power quality to quickly determine the efficiency of an electrical system.View larger Advanced Features for Complete Troubleshooting of Electrical Systems The ACD-50NAV Navigator Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACD-50NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique Navigator joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. Full Range of Advanced Features The ACD-50NAV measures AC current up to 600A, AC/DC voltage to 1,000V, capacitance, resistance, and frequency. Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harm...