Clamp Meters - Page 34

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-52NAV

Troubleshoot electrical systems easily and accurately.View larger Check power quality to quickly determine the efficiency of electrical systems. Advanced Features for Complete Troubleshooting of Electrical Systems The ACDC-52NAV Navigator Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACDC-52NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique Navigator joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. Full Range of Advanced Features The ACDC-52NAV measures AC/DC current up to 600A, AC/DC voltage to 1,000V, capacitance, resistance, and frequency. Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harmonic. The total harmonic distortion reading (0 to 100%) identifies whether you have a harmonics issue - the higher the THD ...

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: MA140-NIST

The MA140-NIST is a Compact AC Clamp Meter with NCV Detector. This Clamp meter takes True RMS measurements for accurate readings of noisy, distorted or non-sinusoidal waveforms. The MA140 can measure up to 300A AC. Complete with carrying case, two LR44 batteries and certificate traceable to NIST. UL listed with a CAT III 600V safety rating.

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-54NAV

Amprobe ACDC-54NAV 1000A AC/DC Power Quality Clamp Meter Test performance such as verifying system efficiency easily and accurately.View larger Advanced Features for Complete Troubleshooting of Electrical Systems The ACDC-54NAV NavigatorTM Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACDC-54NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique NavigatorTM joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. Full Range of Advanced Features The ACDC-54NAV measures AC/DC current up to 1000A, AC/DC voltage to 1,000V, capacitance, resistance, frequency and temperature from -50 °F to 1832 °F (-50 ºC to 1000 ºC). Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harmonic. The total harmonic distortion reading (0 to...

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010

The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Brand: Fluke Model: FLK-A3000 FC KIT

Fluke a3000 FC Wireless AC Current Clamp Module A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below. Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter Fluke Connect Mobile app Fluke Connect See it. Save it. Share it. All the facts, right in the field. Smart phone not included with purchase. Fluke Connect with ShareLive is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more are on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place.  Get started saving time and increasing your productivity.     Fluke 3000 FC Series Wireless Multimeter   Start building tomorrow's test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile app on your AndroidTM or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 meters away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players

Manufacturer: TRIXES Brand: TRIXES Model: AA82

Multimeter Electronic Tester Digital Clamp Weight: 161g Dimension: 17.5 x 6.5 x 2.5 cm Detect live wire function Full Overload Protection Sampling 2 Readings per Second Data Hold Function for easy reading Max Display: 1999 auto polarity display Batteries needed 2 x AAA (Not Included) Contents 1 x Multimeter Tester1 x Test Leads

Manufacturer: Fluke Corporation Brand: Fluke Model: LVD2/CT Color: LVD2/CT Volt Light, 90-600V

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source. Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual Levels of Detection. Blue indicates proximity to AC Voltage source. Red indicates you're at the source. Operating temperature 0 to 50 degree C. Ultra-Bright White LED. 100000 hr bulb. AAA battery included.

Manufacturer: UEi Brand: UEi Test Instruments Model: DL369 Color: Multicolored

UEi Test Instruments designed the DL369 to offer professionals an affordable, clamp-on meter. Designed for the real world, the DL369 includes a dual display for simultaneous measurement, and built-in test lead storage. The DL369 measures 750VAC/1000VDC, 400A AC, Capacitance, Resistance, Continuity, Frequency, Duty Cycle, and micro-Amps. Safety rated to CATIII 600V and UL approved. UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

Manufacturer: Fluke Corporation Brand: Fluke Model: L211

kit includes L200 probe light, TL71 premium DMM test lead set and C75 case. Special value combo pairs the new L200 probe light with one of the most popular test leads by Fluke and a handy carrying case. Small, rugged light easily attaches to any Fluke test probe. Flexible silicone test leads are heat and cold resistant. Zippered case has two inside pockets. Probe light frees both hands for work. 120 hours of battery life. Uses 2 3-volt watch batteries.

Manufacturer: Southwire Brand: Southwire Tools & Equipment Model: 58290240

Southwire 21050T compact digital clamp meter 400a AC/dc true rms cat III 600V UL true RMS readings provide accurate results on circuits with harmonic distortion. Measures both AC and dc current for use in multiple applications. Capacitance, frequency, duty cycle and temperature functions