Clamp Meters - Page 6

Manufacturer: Identity Music Group Brand: Ideal Model: 61-775

The IDEAL 61-775 1000A AC/DC Tight Sight Clamp Meter that includes TRMS, capacity and frequency. The unique Tight Sight bottom display makes all those hard to reach measurements more convenient. The 660 A True RMS clamps are for a variety of industrial and commercial environments. It has easy to read displays to that features large number and green glowing backlight. This meter has a safety rating of CAT IV along with the other features that include frequency, capacitance, peak, data hold and max/min. In 1916, J. Walter Becker started the Ideal Commutator Dresser Company of Chicago from his mother's kitchen. He manufactured commutator dresser stones with the belief that every product should be worth more than the price paid for it. Service, he said, was part of the product. That idea has been the core IDEAL business principle for over 90 years. Today, the many loyal distributors and customers that make IDEAL successful are a testament to Becker's original philosophy.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-41PQ

The Amprobe ACD-41PQ digital clamp meter is true RMS (root mean square) sensing, auto-ranging multimeter for measuring current, voltage, resistance, frequency, temperature, harmonics, power factor, and real, reactive, and apparent power in industrial electrical testing applications. It has a clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), resistance to 1,000 ohms, and frequency to 500 hertz (Hz). The clamp has two jaws that can close around an electrical conductor up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. Power factor, real power, reactive power, and apparent power readings provide data on the power efficiency of an electrical system. The meter measures fundamental total harmonic distortion (THD) and individual harmonics, which can degrade the quality of the power being supplied by the system. Automatic detection mode selects voltage or current function based on input. The peak hold reading displays the maximum measurement of a current or voltage surge. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 17 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal wave...

Manufacturer: FLIR Systems Brand: Extech Model: 380976-K

Powerful Power Quality Testing The Extech 380976-K is a Single Phase/Three Phase 1000A AC Power Clamp Meter Kit that combines comprehensive power quality testing along with expanded clamp meter capabilities. Along with surges and dips in a plant’s main power supplies, infrastructure factors such as aging lines can affect power quality. And as the prevalence of smart metering systems in manufacturing sites increases, expect to see increased effects on power quality. In addition, power quality should be evaluated and optimized during gen-set installation and maintenance. Advanced Functionality Use the full-size Extech to measure Current, Insulation Resistance, Temperature (Type K) and Power. For example, in trying to determine if there is dirty power in one branch supply, you can measure for True Power (kW), Apparent Power (kVA), and Reactive Power (kVAR), not to mention Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator. The large 9,999-count readout is easy to read while performing a range of functions on this comprehensive power clamp meter. In addition to power quality functions, the True RMS clamp meter also measures AC current and AC/DC voltage, resistance, frequency and temperature. In fact, frequency can be displayed simultaneously with voltage. Other Features If you perform maintenance on heating systems or industrial heat process equipment, you can take advantage of μA current readings with 10nA resolution for flame rod tests. Capacitance testing can be performed up to 7000μF with 0.001μF resolution. Investigate resistance issues with a rating up to 100MΩ and temperatures up to temperature to 1000ºF using the included thermocouple bead wire probe. The useful Data Hold function freezes the display while the Min/Max function tracks and displays minimum and maximum values – even tracking with elapsed time. The 380976-K kit comes with a professional set of test lead accessories to simplify a range of testing scenarios: two CAT IV-600V 72" (1.8m) lead extensions...

Manufacturer: ETCR Brand: ETCR Model: ETCR2000C+

The lead time is about 2-3 business days; FedEx/DHL delivery time is about 5-7 days. Specificaiton: •Function:Ground resistance test, Loop resistance test •Power Supply:6VDC 4 PCS of AA Alkaline batteries •Resistance Range:0.01-1200Ω •Resistance Resolution:0.001Ω •Highest Resistance Accuracy:±1%±0.01Ω •Current Range:0.00mA-20.0A •Current Resolution:0.05mA •Highest Current Accuracy:±2.5%±1mA •Data memory:99 Sets •Alarm Threshold Setting Range:Resistance: 1-199Ω •Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. •Interference Signal Recognition: "Beep-beep-beep" tone, NOISE symbol blinking •Working Temperature and Humidity:Working Temperature and Humidity •LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm •Clamp Size:Clamp Size •Clamp Opening Extent:32mm •Tester Weight:1160g (With batteries) •Clamp Dimension:L×W×T: 285mm×85mm×56mm •Protection Level:Protection Level •Structural Feature:Clamp CT •Shifting:Automatic shifting •External magnetic field:＜40A/m •External electrical field:＜1V/m •Single measurement time:0.5 second •Resistance measurement frequency:＞1KHz •Measured current frequency:50/60Hz Automatic measurement •Low Battery Indication:Low battery symbol displays when battery is lower then 5.3V •Memory Full Indication:MEM symbol blinks when all 99 sets memory is full •Over Range Indication:Out of range indication "OLΩ", "L0.01" or "OL A" •Auto Power-off:5 minutes after Boot up

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1503

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: Fluke Brand: Fluke Model: 4550041

Fluke 820 LED Stroboscope.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 MDT

The Fluke 1587 MDT advanced insulation and motor drive troubleshooting kit is designed for troubleshooting and preventive maintenance applications including three-phase motors, cables, switch gear, and in applications where testing is required without the need to break the circuit. The kit includes the Fluke 1587 digital insulation multimeter, Fluke i400 current clamp, and Fluke 9040 phase rotation indicator. The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) insulation multimeter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the c...

Manufacturer: Fluke Corporation Brand: Fluke Model: 203414

Digital multimeter fast acting replacement fuse. Nominal current: 440mA. Maximum voltage to ground: 1000V.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 313A

The BK Precision model 313A features auto ranging capabilities and is ideal for use in cramped quarters. The BK Precision mini clamps are more than just current clamps they offer the ability to measure voltage and resistance. The 313A meets CE requirements and comes with a one year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP-7240

Li-Ion battery pack for the 75x documenting process calibrator.