Current Testers - Page 15

Manufacturer: Fluke Corporation Brand: Fluke Model: 4695932

The Fluke offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools.

Manufacturer: Fluke Corporation Brand: Fluke Model: I2000 FLEX

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Current ranges: 20A, 200A, 2000A AC rms. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy: at +25 degree C +/- 1 percent of range (45 Hz to 65 Hz). Linearity: 10 percent to 100 percent of range +/- 0.2 percent of reading. Noise: 8 mV ac rms (30 A), 2 mV ac rms (300 A, 3000 A). Frequency range: 10 Hz to 20 kHz (-3 dB). Phase error: less than +/- 1 degree (45 Hz to 65 Hz), +/- 10 degree (at 20 kHz). Position sensitivity: with cable greater than 25 mm from the coupling +/-2 percent of range. External field: with cable greater than 200 mm from the head +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator. Temperature coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600 V AC rms or DC. Head circumference: 610mm (24"). Head cable diameter: 14.3mm (0.56"). Head bend radius: 38.1mm (1.5"). Cable length (head to electronics): 2m (6.56'). Output connection: Molded 4 mm safety plugs (not integrated). Operating temperature range: 0 degree C to +70 degree C (32 degree F to 158 degree F) (head and electronics). Storage temperature range: -40 degree C to +105 degree C (-40 degree F to 221 degree F) (head), -20 degree C to +85 degree C (-4 degree F to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing). Measures 68.5mm width by 116mm height by 30mm depth.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-179/TPAK Color: Fluke 179 w/TPAK Meter Hanging Kit

The Fluke 179/TPAK True RMS Digital Multimeter with TPAK Meter Hanging Kit combines the true RMS Fluke 179 Digital Multimeter (also known as a multitester) and the ToolPak Meter Hanging Kit for measuring AC and DC voltage and current, frequency, resistance, diodes, temperature, continuity, and capacitance. The meter measures AC voltage to 1,000V, DC voltage to 1,000V, resistance to 50 megaohms, and temperature from -40 degrees C to +400 degrees C with a K-type thermocouple probe. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The 6,000-count resolution, 3-3/4 digit LCD is backlit for readability in low-light conditions. A 33-segment analog bar graph updates 40 times per second, which is useful for making peak and null adjustments and for observing rapidly changing inputs. This meter is able to capture minimum and maximum measurements and calculate a running average of all readings with the MIN/MAX/AVG recording mode, and a hold function freezes the display screen. The display provides a test lead alert when the rotary switch is moved to or from the mA or A position to ensure that test leads are in the correct terminals, and an alert symbol is displayed in the case of voltage overload or unsafe voltage. A continuity beeper turns on at less than 25 ohms and turns off at 250 ohms. This meter meets International Electrotechnical Commission (IEC) safety standard 61010 for Category IV up to 600V and Category III up to 1,000V. The ToolPack Hanging Kit includes a universal hanger, magnet, and 17" (23 c...

Manufacturer: Fluke Brand: Fluke Model: FLK-V3001 FC KIT

Fluke V3001 FC KIT FC Wireless Essential Kit With V3001 Start building tomorrow's test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile app on your AndroidTM or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 meters away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players. You connect any of the Fluke ConnectTM Modules to your test point and then view the results on specific Fluke Connect enabled hardware or through Windows ®  software on your PC-up to 20 meters (65.6 feet) away. Save time and conduct more tests with less trips. Productivity Communicate with your iOS (4s and later) and AndroidTM (4.3 and up) devices with the new Fluke Connect mobile app Wireless technology allows connectivity between your phone, PC, and all Fluke Connect enabled test tools Let your team see what you see in an instant with ShareLiveTM video call Save money and time by taking multiple measure-ments simultaneously Isolate intermittent events or record signal fluctuations without even being there using the log function on the modules View results on your computer with the PC Adapter Work with fewer interruptions by recording multiple sessions before downloading. Data is saved to a PC in

Manufacturer: Fluke Brand: Fluke Model: FLK-V3000 FC KIT

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: I310S

The i310s current probe is based on hall effect technology for use in measurement of both DC and AC current. The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Current ranges: 30A and 300A AC rms or +/-45A and 450A DC. Measuring Ranges: +/-45A and 450A DC. Output Sensitivity: 10 mV/A (40A) to 1 mV/A (400A). Resolution: +/-50 mA (40A) to +/-100 mA (400A). Load impedance: greater than 10 k Ohms and less than or equal to 100 pF. Frequency range (small signal): DC to 20 kHz (- 3 dB). Phase shift below 1 kHz, less than 2 degrees. Temperature coefficient: +/-0.1 percent of reading / degree C. Power Supply: 9V Alkaline, MN1604/PP3. Battery life: 30 hours, low battery indicator. Inrush current: 600A AC rms maximum. Accuracy (at +23 degree C): (30A range) +/-1 percent of reading +/-50 mA, (300A range) +/-1 percent of reading +/-300 mA. Bandwidth to meet accuracy specification: 1 kHz. Conductor position sensitivity: +/-1.5 percent relative to centre reading. Working voltage: 300V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: safety BNC connector, supplied with safety 4mm adaptor. Output zero: manual adjust via thumbwheel. Cable length: 2m. Operating temperature range: -10 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). EMC Standards: BS EN 61236 1998 +A1, A2, and A3.

Manufacturer: Fluke Corporation Brand: Fluke Model: PV350

The PV350 pressure/vacuum transducer module (the module) measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1 mV dc per unit. A module and a high-performance digital multimeter (DMM) with min/max function become a data logger capable of measuring peak high and peak low. The PV350 is compatible with industrial gases and liquids that are compatible with 316 stainless steel. To determine the compatibility of a liquid or gas, refer to the manufacturer's specifications. When making measurements on more than one type of pressure system, make sure the fluids or gases in those systems are compatible. If they are not, contamination or damage to the system being measured may result. Battery: standard 9 V battery (NEDA #1604, 6F22, 006P). Battery life: 300 hours (typical) for carbon-zinc 400 hour (typical) for Alkaline. Vibration: 3 g at 55 Hz sinusoidal. Shock: 1 meter drop. Electrical cable: black PVC, will withstand up to 105 degree C. Cable length: 8'. Pressure port connection: 1/4" NPT. Connector: brass 1/4" male flare to 1/4" female pipe thread. Pressure range: 350 to 500 psig (2413 to 3447 kPa), accuracy: +/-5 percent of reading +/-1 psig typical (+/-5 percent +/-7.0 kPa) Vacuum range: 0 to 29.9" Hg (0 to 76 cm-Hg), accuracy: +/-1 percent of reading +/-0.5 in-Hg (+/-1 percent of reading +/-1.3 cm-Hg). Output: 1 mV per unit (psi, kPa, cm-Hg or in-Hg). Resolution: 0.1 psi/in-Hg in mV range, 1 psi/in-Hg in volt range with 3-1/2 or 4-digit meters. RFI Specification: Typically less than 1 percent error from 14 kHz to 30 MHz at 1 V/M. Meter input impedance: greater than or equal to 10 M ohms. Maximum working pressure: 500 psi. Burst pressure: 1000 psi. Storage temperature: -51 to 71 degree C.

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Plugs & Test Jacks Panel Mt.Ban Jacks (RED)

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1503

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV400

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.