Current Testers - Page 155

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CP6550-NA

The Cal Test family of AC/DC oscilloscope clamp-on current probes is a four model family of ELDITEST current probes which extend the funtionality of general purpose oscilloscopes. The series is marketed under the time-honored ELDITEST brand name in both North America and the European Union.

Manufacturer: Fluke Corporation Brand: Fluke Model: 80I-110S

The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. It is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 installation category II, working voltage 600V. Output signal: 10A range: 100mV/A; 100A range: 10mV/A. Bandwidth: 1Hz to 20kHz. 10 A, AC/DC, 100 A, AC/DC Nominal current range. 0.1A - 10A AC/DC and 1A - 100A AC/DC Continuous current range. 140 A - 2 kHz Maximum non-destructive current. 3 percent + 50 mA (at 10 A) basic accuracy. DC - 100 kHz Useable frequency. 600 V maximum voltage. 9 V, 55 h battery life. 11.8mm conductor diameter. 1.6m output cable length. 1 year warranty.

Manufacturer: URBEST Brand: URBEST®

Could be used either in a Digital or an Analog meter. Good quality, good performance and easily installation. Package Content: 1 x 100A 75mV DC Shunt Resistor

Manufacturer: NITBUY Brand: NITBUY

This anel Meter is specially designed for measuring current and monitoring battery & electrical system; # This meter offers users great simplicity and easily reading; The Analog Panel Meter is low power consumption and long lasting

Manufacturer: SMAKN Brand: SMAKN

Product Name : DC Shunt; Material : Metal, Plastic Color : Black, Silver Tone; Accuracy : 0.5 Class Current : 30A; Voltage Drop : 75mV Dimension : 12 x 2.5 x 1.5cm / 4.7" x 0.98" x 0.6"(L*W*H); Net Weight : 60g Package Content : 1 x 30A 75mV DC Shunt Resistor SMAKN DC Current Analogue Amp Panel Meter Shunt Resistor 30A 75mV An Ammeter Shunt allows the measurement of current values too large to be directly measured by a particular ammeter. Could be used either in a Digital or an Analog meter. Good quality, good performance and easily installation. Please note: 1> SMAKN is a registered trademark and the only authorized seller of SMAKN branded products. 2> SMAKN provide you various kinds of great products at the lowest possible prices, welcome to our store and get what you want !!! 3> SMAKN highly appriciate all customers' opinions to improve the selling ,also if anything you unsatisfied, pls contact our customer service department for probable best solution.

Manufacturer: uxcell Brand: uxcell Model: B006OHEBE4

Measures current range of AC 0-10mA with accuracy of Class 2.5. Clear and easy to read scale and a button for fine tuning the dial.

Manufacturer: XCSOURCE Brand: XCSOURCE Color: Green

Features: Universal for: Motorbike Car / Boat / ATV / UTV / Camper / Caravans / Travel Trailer etc. LED digital tube, lamp display is Green. It works for 12V-24V. Mini size and easy to install,work great for checking Voltage. Mounts in a 1-1/8" hole in panels up, 0.25" thick, a nylon retaining nut holds the meter in place. The state of your battery between full charged and discharged. The meter has easy to read LED segments and connect to your 12 volt system. Used to monitor the storage-battery voltage, with reverse connection protection function, line will not be burnt. Timely grasp the state of battery voltage, voltage measurement purposes can also be used for other products. Specifications: Waterproof Color: Black LED Display: Green Input Voltage:12-24V Measure Voltage: 6 - 30V Size: 14.2" x 11.4" x 5.9" Interface Type: Anode and cathode Eco-friendly Meterial: Plastic Application: Universal for all Cars, motorcycles and other universal models. Package includes: 1 x LED DC Voltmeter 2 x Insulated Terminals 2 x Screws

Manufacturer: uxcell Brand: uxcell Model: a11051300ux0029

The Shunt is used to multiply the measuring range of current of measuring. Could be used either in a Digital or an Analog meter. Good quality, good performance and easily installation.

Manufacturer: Micropromo Brand: Micropromo Color: Black

SPECIFICATION: Interface: Anode and Cathode Material: Plastic Color: Black Weight: About 0.013 kg/0.006 pound Dimension: 36 x 26mm/1.42 x 1.02inch Package: Poly bay Package Included: 1 x Voltmeter Socket (Without Retail Packaging) Shipping: Please make sure your shipping address is current and correct when you order, Apt # and ZIP CODE matters also.

Manufacturer: uxcell Brand: uxcell Model: a11052500ux0045

Descriptions:Measures current range of DC 0-3mA with accuracy class 2.5.Clear and easy to read scale and a button for fine tuning the dial.Specification:Product Name: Analog AmmeterModel No.: 85C1Measuring Current Range: DC 0-3mAAccuracy: Class 2.5Material: Plastic, Electronic ComponentsColor: WhiteMeter Face Size(Approx.): 6.3 x 5.5 x 1cm / 2.5inch x 2.2inch x 0.39inch(L*W*T)Overall Depth: 5.6cm / 2.2inchThread Size: 0.28 x 0.75cm / 0.11inch x 0.30inch(Dia.*L); 0.28 x 1cm / 0.11inch x 0.4inch(Dia.*L)Net Weight: 63gPackage Content:1 x Analog Ammeter