Current Testers - Page 185

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-CM271 2000A AC/DC Digital Clamp Meter Designed to Provide Many Functions for AC/DC Measurements Including Resistance, Capacitance, and Diode Test, etc. with Mid-Size and Tear-Drop Shaped Jaw, It is Easy to Use in Crowded Cable Areas and Other Tight Places. Safety Standard: IEC/EN 61010-1 CAT III 600V. /IEC/EN61010-2-032 / EN 61326-1

Manufacturer: Klein Tools Brand: Klein

600A AC/DC True RMS Clamp Meter Product Features True RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle Tests non-contact voltage, diodes, and continuity Backlit display and worklight Magnetic mount and lead storage Non-Contact Voltage Tester Analog bar graph.Specifications Height: 7.65" (194mm)Width: 2.56" (65mm)Weight (oz.): 11.9oz (337.36g)Batteries: 2 x AAAJaw Size: 1.25" (32mm)Included Accessories: test leads, batteries, case Ingress Protection: IP42Safety Rating: CAT III 600V

Manufacturer: Promax Brand: Promax Model: CT-195

CT098, CT193, CT195 and CT237 clamp meters are essential instruments for low voltage installers. The CT Series models offer the accuracy and reliability of a professional instrument with a safe, robust and ergonomic design.

Manufacturer: IDI Brand: IDGroup

Contact Probes .10 CTR 3 AMP PROBE HEADED 4 PT CRWN STL

Manufacturer: AKTAKOM Brand: AKTAKOM Color: Blue

AKTAKOM ACM-2353 Professional True RMS 1000A AC Watt Clamp Meter provides accurate Watt, AC Current and Voltage readings regardless of waveforms. .

Manufacturer: DURATOOL Brand: Duratool

DURATOOL SB1416 SINGLE ENDED SCRIBER

Manufacturer: Megger Brand: Megger Model: PVK330

Megger PVK330 Photovoltaic Kit with D.C Clamp Multimeter Photovoltaic Kit with D.C Clamp Multimeter When installing, commissioning and testing a photovoltaic installation additional instrumentation is required to accompany the usual electrician's test equipment such as the Megger MFT1730 and MFT1835 multifunction testers. The Megger PVK330 photovoltaic kit offers this additional instrumentation in the form of a PVM210 irradiance meter, DCM340 600 A ac / dc clampmeter and a kit of specialist solar testleads. To provide easy storage of the PV kit a zipped pouch is also included. The PVK330 kit offers the solar / photovoltaic engineer a clampmeter option of verifying, with the PVM210 irradiance meter, the stated short circuit current as provided by the manufacturer of the solar panel as required by published standards. In addition, this clampmeter offers the option of testing the current within each 'string' on a larger solar array without disconnection of cables. PVM210 Irradiance Meter The PVM210 is a pocket size instrument that has both solar detector and meter combined in one unit that permits single handed use, ideal for working at height and on sloping roofs. The unit has a 3¾ digit display and a maximum range of 1999 W/m². A hold function allows easy measurements of solar power. DCM340 Clamp Meter The DCM340 Clamp Meter features 600 V ac / dc and 600 A ac / dc ranges. Additional functions include resistance and frequency. A hold feature to enable easy measurements is also included. The additional functions would also prove to be of use in other sections of the photovoltaic installation. Silicon test leads with probes and a protective storage pouch are provided with each clamp. Specialist PV Test Leads In addition to the silicon multimeter test leads supplied with the DCM340 two pairs of specialist solar test leads are included in the PVK330. The first pair of leads comprise of 1

Manufacturer: Adafruit Brand: Adafruit Industries

Test Leads Alligator Clip test Lead - set of 12

Manufacturer: AEMC Brand: AEMC Model: 401

The AEMC 401 digital clamp-meter with temperature probe is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 48mm (1.89 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads, which are silicone-insulated for flexibility and resistance to heat and cold, is included for measuring AC and DC voltage to 1,000V, frequency to 20kHz (kilohertz), and resistance to 100kΩ (kilohms). Frequency can also be measured with the clamp. The meter comes with a K-type thermocouple probe that measures temperatures from -60 to +1,000 degrees C (-76 to +1,832 degrees F).The meter has a rotary switch to select the property to measure, and a 10,000-count LCD with a backlight for visibility in low light that turns off automatically after two minutes. The inrush current function, with a selectable sampling time of 1ms (millisecond) or 100ms, analyzes surge current at startup and due to load increases in installations that are up and running. The maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on four AA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatica...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-63TCAL

The Fluke 63 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -32 to +535 degrees C (-25 to +999 degrees F) with accuracy that varies from + or - 1 degree C to + or - 3 degrees C depending on the temperature range. It has a 12:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It can display the current temperature and the maximum temperature for comparison during process monitoring. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The CE mark indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-32 to +535 degrees C (-25 to +999 degrees F)Infrared sensor accuracy-32 to -26 degrees C (-25 to -15 degrees F): + or - 3 degrees C (+ or - 5 degrees F); -26 to -18 degrees C (-15 to 0 degrees F): + or - 2.5 degrees C (+ or - 4 degrees F); -18 to +23 degrees C (-0 to 73 degrees F): + or - 2 degrees C (+ or - 3 degrees F); For targets above 23 degrees C (73 degrees F): + or - 1% of reading or + or - 1 degrees C (+ or - 2 degrees F), whichever is greaterDisplay resolution2 degrees C / 5 degrees FDistance-to-spot ratio12:1Power Supply9V or NiCd batteryWeight320g/11oz.Dimensions200 x 55 x 160mm / 8 x 2 x 6 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focus...