Current Testers - Page 32

Manufacturer: Amprobe Brand: Amprobe Model: 15XP-B

The Amprobe 15XP-B digital multimeter with built-in non-contact voltage detector is an average-sensing, auto- or manual-ranging meter for measuring current, voltage, and resistance, and for reporting logic states in electrical testing applications. The meter comes with a set of detachable test leads that measure alternating current (AC) and direct current (DC) to 2 amp, AC voltage to 750 volts (V), DC voltage to 1,000V, and resistance to 2,000 megaohms. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The logic test reports the logic state of a transistor-to-transistor (TTL) digital circuit in electronics. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category I installations up to 1,000V (which covers protected electrical equipment such as small household appliances), category II installations up to 600V (which ...

Manufacturer: Fluke Corporation Brand: Fluke Model: TL223-1

SureGrip electrical test lead set. Handy all-in-one kit includes AC220 SureGrip alligator clip set, TP238 SureGrip insulated test probe set, TL224 SureGrip silicone test lead set (straight to right). 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-TI-VISOR3

Fluke FLK-Ti-VISOR3 Sun Visor for the Fluke Ti200, Ti300, and Ti400 Thermal Infrared Camera Series

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: ADM3201

The ADM3201 is a digital multimeter designed for automotive technicians making essential diagnostic measurements in today's automotive applications. UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4589220

The MP1-MAGNET PROBE 4MM Banana/Set of 4 is a set of four voltage probes that attach magnetically, finger barrier for safe connection. CAT III 1000 V, CAT IV 600V.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4589220

The MP1-MAGNET PROBE 4MM Banana/Set of 4 is a set of four voltage probes that attach magnetically, finger barrier for safe connection. CAT III 1000 V, CAT IV 600V.

Manufacturer: Morris Products Brand: Morris Products Model: MP-57254

DC voltage: 1000V ±1.0%. AC voltage: 750V ±1.0%. AC current: 20A/200A/1000A ±2.0%. 1000A Clamp Current Meter Resistance: 200/2000 ohms ±1.0%. Temperature Range: -40°F to 1350°F (-40°C to 732°C) ±1.0%. Fast Continuity Beeper. Diode Test: Tests Current 1.4mA Max, Test Voltage 2.8V Max. Display: (3) 1/2" Digit LCD, Max Reading 1999. Power Source: 9 Volt Battery. 400A Digital Clamp Meter with Temperature Probe Dimensions: 8.07” X 1.73” X 1.57”.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 2200

The Kyoritsu 2200 digital clamp-meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. The jaws are 10mm (0.39 inches) thick to fit between narrowly spaced conductors. A set of test leads is included for measuring AC and DC (direct current) voltage to 600V and resistance to 40MΩ (megohms). The meter has a rotary switch to select the property to measure, and a 4,199-count LCD. To capture readings in tight spaces and aid documentation of readings, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on two 1.5V AAA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This average-sensing, also called average responding or mean value, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT (category) III installations to 600V for current measurement and to 300V for voltage measurement, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation, and CAT (category) II installat...

Manufacturer: Contempo Views Brand: Contempo Views

Features - CAT III 600V - 3-1/2 digit LCD with Analog Bargraph - Display Counts: 2000 - Auto Ranging - Data Hold and Range Hold Auto Zero - Maximum conductor size 30mm - Continuity test below 25 ohms, buzzer will sound - Auto Power off - Double injection outer case Specifications - Maximum Current: 400 Amps - Maximum Conductor Size: 30mm - AC Current Range: 0.1A to 400A, +/-(2.0% of rdg + 10 dgts) - DC Current Range: 0.1A to 400A, +/-(2.0% of rdg + 10 dgts) - AC Voltage Range: 1mV to 600V, +/-(1.0% of rdg + 3 dgts) - DC Voltage Range: 1mV to 600V, +/-(0.8% of rdg + 2 dgts) - X10RPM: 0~1200 x 10RPM +-2.0% - Continuity Buzzer: Yes - Data Hold: Yes - Resistance: 0.1 ohm to 40 megohms +/-(1.0% + 3 dgts) - Diode: 3.0V DC approx - Dimensions: 205mm )L) x 64mm (W) x 39MM (D) - Weight: 280g approx. including batteries

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Leads PIN TIP PLUG PATCH RED