Current Testers - Page 65

Manufacturer: Harwin Brand: Harwin

Contact Probes 1.90mm SPRING PROBE 2 PART CONCAVE HEAD

Manufacturer: Morris Brand: Morris

Cat III 1000A Digital Clamp Meter with Temperature Probe - Heavy duty 1000A Clamp Current Meter.Cat III 1000A Digital Clamp Meter with Temperature Probe features include: Conforms to IEC61010-1 Cat III Display: (3) 1/2" Digit LCD, Max. 1999 counts Data hold function Back light function DC voltage: 1000V ±1.0% AC voltage: 750V ±1.0% AC current: 20A/200A/1000A ±2.0% 1000A Clamp Current Meter Resistance: 200/2000 ohms ±1.0% Temperature Range: -40°F to 1350°F (-40°C to 732°C) ±1.0% Fast Continuity Beeper Diode Test 1000A Clamp Current Meter Jaw Opening to 1.66” max. Order Qty of 1 = 1 Piece Below is more info on our Cat III 1000A Digital Clamp Meter with Temperature Probe

Manufacturer: Harwin Brand: Harwin

Contact Probes 2.54mm SPRING PROBE 2 PART SPEAR HEAD

Manufacturer: Reed Brand: Reed Instruments Model: C-212

The Reed C-212 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 40mm (1.57 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750(V, DC voltage to 1,000V, voltage frequency to 10kHz (kilohertz), and resistance to 4,000Ω (ohms). Frequency of the current can be measured with the clamp. The meter has a rotary switch to select the property to measure, and a 3,999-count LCD that shows readings numerically and in a 42-segment bar graph. Its relative function allows a measurement to be set as a reference value, and it displays the subsequent measurements as positive or negative deviations from that value. The peak hold function records the maximum and minimum readings for voltage and current during a 1ms (millisecond) sampling time. The maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects th...

Manufacturer: ETCR Brand: ETCR

Technical Specification: Measurement Range:0.01mA~300.00A Resolution:10uA Accuracy:±1.5%±5dgt (23ºC±3ºC, below 70%RH) Process Type:ClampCT, Integral Approach Clamp Size:25mm*30mm Display Type:4 Digits LCD LCD Dimension:35mm*21.5mm; Display Dimension: 32mm*15mm Sampling Rate:2 Times/Second Frequency:50Hz, 60Hz Automatic identification Shifting:Automatic Shift Line voltage:Below AC 600V RS232 Interface:With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory:99 sets, "FULL" Blinking when memory is full Peak Maintaining:Peak value capture hold function, press HOLD without Release to display peak value Reading Hold:Reading hold function: "DH" symbol display Overflow display:Range overflow function: "OL" symbol display Automatic Shutdown:5 minutes after the boot BatteryDetection:When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Rated Power:5mW Working Temperature and Humidity:0ºC~40ºC; below 80%rh Storage Temperature and Humidity:-10ºC~60ºC; below 70%rh Insulation Strength:AC2kV/rms (between core and box) Safety Provisions:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V)

Manufacturer: Amprobe Brand: Amprobe Model: 4560570

AMP-330 1000A AC/DC Motor Maintenance True-RMS HVAC Clamp Meter with Motor Rotation, 1 and 3-phase sequence testing, inrush current monitoring, temperature, DC Micro amps, capacitance, low pass filter, Amp-Tip, NVC, CAT IV 600V CAT III 1000 V.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-V Color: Green

ScopeMeter Compact Probe for electronic applications, green, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: ETCR Brand: ETCR

Technical Specifications: Measurement Range:0.000mA~60.00A Resolution:0.001mA Accuracy(23℃±3℃,below70%RH):0~60A---±1.5%±5dgt 60A~200A--------±2%±5dgt 200A~300A-------±3%±5dgt 300A~600A-------±4%±5dgt Measure Type:Clamp CT, Integral Approach Display Type:4 Digits LCD,35mm×21.5mm;display domain:32mm×15mm Sample rate:2 time/sec Frequency:50Hz,60Hz Automatic identification Shifting:Automatic Shift Size of clamp:25mm×30mm Line Voltage:AC600V RS232 Interface:With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data storage:99 sets, "FULL" Blinking when memory is full Peak Maintaining:Peak value capture hold function, press HOLD without Release to display peak value Reading Hold:Reading hold function: "DH" symbol display Overflow Indication:Range overflow function: "OL" symbol display Shut down:5 minutes after boot up Battery voltage:When the voltage is below7.2V, the low voltages signal" " warn to replace the battery. Rated Power:5mW Humiture:0℃~40℃;below 80%rh Insulation Strength:AC2kV/rms. (between core and housing) Safety Provisions:IEC1010-1, IEC1010-2-032, Pollution Degree: 2, CAT Ⅲ(600V)

Manufacturer: Greenlee Brand: Greenlee Model: CMH-600

Includes Clamp Meter (2) 1.5V AAA Batteries Test leads and clips Carrying case Features Measures AC current and DC micro-amps AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance, temperature and frequency Tests continuity and diodes Phase Sequence increases accuracy on small wires and low current Two voltage detection modes non contact or using a single test lead Data hold Recording of Maximum, Minimum and Average readings Lifetime Limited Warranty

Manufacturer: Fluke Brand: Fluke Model: 4472387 Color: Yellow

Pin continuity Test: Tests if filaments have continuity. Ballast-type Test: Determine if ballast is electronic or magnetic without taking fixture apart – identify energy wasting ballasts.