Current Testers - Page 75

Manufacturer: Fluke Corporation Brand: Fluke Model: TL175E

TwistGuard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.

Manufacturer: Etekcity Brand: Etekcity Model: 679113374812

Clamp meters, also called clamp-on meters, are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. This Etekcity digital clamp meter is an auto-ranging multimeter that has two jaws which can close around an electrical conductor up to 26mm in diameter to measure AC current up to 400 amp without interrupting the circuit. A set of test leads is included for measuring AC/DC voltage, resistance and for diode and continuity test. It comes with a handy carrying pouch and an easy-to-read large LCD display, and also featues Data Hold, Max Reading, Auto off functions.SpecificationsSafety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V overvoltage and double insulationDisplay: Maximum display 1999Range selection: Auto rangingOverload display: Display OLMax. Jaw Opening: 28mm diameterMax. Current Conductor Size: 26mm diameterAC current: 2/20/200/400AAC voltage: 2/20/200/600VDC voltage: 200mV; 2/20/200/600VResistance: 200Ω; 2/20/200KΩ; 2/20MΩDiode test: YesContinuity test: YesDimensions: 8.19 x 2.99 x 1.18 inchesPower: 2 AAA 1.5V batteriesBattery Life: about 150hoursWeight: 9.2 oz Package Includes 1 x Etekcity Digital Clamp Meter2 x Test Leads (a pair) 1 x Carrying Bag1 x User Manual

Manufacturer: MENDA Brand: Menda

MENDA 35621 PROBE, NYLON, SPUDGER, 5.5"

Manufacturer: UEi Test Instruments Brand: UEI Test Equipment Model: UTLDM2 Color: Multicolored

Operating Category: 600V CAT III, pollution degree: 2.Operating Elevation (> 2000 m)Operating Conditions: 32~104DegreeF (0~40DegreeC), >80% RH (do not use meter when temperature >10DegreeC).Storage Conditions: 14~140DegreeF (-10~60DegreeC), >70% RH (remove the battery).Temperature Coefficient: 1x Accuracy/DegreeC (>18DegreeC or

Manufacturer: Southwire Brand: Southwire Tools & Equipment Model: 58290040

Southwire 21010N compact digital clamp meter 400a AC cat III 600V UL capacitance, frequency, duty cycle and temperature functions. Built-in non-contact AC voltage detector. Impact resistant double molded housing also provides comfortable grip

Manufacturer: Fluke Brand: Fluke Model: FLK-VT-HARD CASE

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Etekcity Brand: Etekcity Model: 25706341592 Color: Black

The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. Features 1.Accurately measures current, voltage, resistance, and more 2.Backlit LCD with large digits for visibility in dimly lit areas 3.Includes 9V battery and pair of test leads 4.Small size for portability - Perfect for use while on the go 5.Displays results quickly with 2-3 readings per second update speed Specifications Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation Max.display: 1999, 3 1/2 digits Range selection: Manual ranging Overload display: Display OL DC Voltage: 200mV/2000mV/20V/200V ±(0.5%+2), 500V (0.8%+2) AC Voltage: 200V/500V ±(1.2%+10) DC Current: 2000μA/20mA ±(1%+2), 200mA ±(1.2%+2), 10A ±(2%+5) Resistance: 200Ω ±(0.8%+5), 2000Ω/20KΩ/200KΩ ±(0.8%+2), 20MΩ ±(1%+5), 200MΩ ±[5%(reading-10)+10] Diode Test: Yes Continuity Test: Yes Square Wave Output: Yes Dimensions: 5.1" x 2.9" x 1.4" Power: 1 x 9V 6F22 Package Includes 1 x Etekcity MSR-R500 Digital Multimeter 2 x Test Leads (pair) 1 x 9V Battery 1 x User's Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: TL950

1 Pair (red, black) of test leads with multi-stacking 4mm banana plugs and mini-pincer. Mini-pincers open to 2.3mm. 90cm long PVC insulated leads. 30V rms or 60V DC, 5A. 1 Year warranty.

Manufacturer: REED Instruments Brand: Reed Instruments Model: R8888

The REED R8888 Deluxe Carrying Case is a great way to protect your test equipment investment. With a foam lined interior you can easily carry your equipment from one job to the next.

Manufacturer: Fluke Corporation Brand: Fluke Model: RPM80

Inductive Pickup for both conventional and distributor-less (DIS) ignitions.