Oscilloscope Accessories - Page 16

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-G

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-V Color: Green

ScopeMeter Compact Probe for electronic applications, green, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Fluke Brand: Fluke Model: 4472387 Color: Yellow

Pin continuity Test: Tests if filaments have continuity. Ballast-type Test: Determine if ballast is electronic or magnetic without taking fixture apart – identify energy wasting ballasts.

Manufacturer: Fluke Corporation Brand: Fluke Model: I200S

Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Companion to your ScopeMeter, power quality meter or digital multimeter to measure up to 200A AC. Included adapter for DMM's. Two ranges: 20 A and 200A, 10 or 100 mV/ Amp output. Take accurate current readings without breaking the circuit. Maximum conductor diameter 20mm. CAT III 600V safety rating. Nominal current range: 20A, 200A. Continuous current range: 0.1A - 24A, 0.5A - 200A. Maximum non-destructive current: 240A. Lowest measurable current: 0.1A. Basic accuracy: 1.5 percent +0.5 A (48-65 Hz) (percent reading + floorspec). Useable frequency: 40 Hz - 10 kHz. Output levels: 100 mV/A, 10 mV/A. Maximum conductor size (busbar): 20 x 5mm. Output cable length: 2.0m.

Manufacturer: North Coast Electric Brand: Fluke Model: Fluke 9040

The Fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage (up to 700 V) and frequency range suitable for commercial and industrial applications. The included test probes have a variable clamping range for safe contact, also in industrial sockets. 3 phase indication. Indication of phase rotation. Clear LCD display. No battery required. 40 to 700V voltage range. 15 to 400 Hz frequency range. Continuous operating timer. 0 to 40 degree C operating temperature. IP 40 Dust/water resistance. Measures 61mm width by 124mm height by 27mm depth. 2 years warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1750 TABLET

Replacement wireless handheld device for the Fluke 1750 Power Recorder

Manufacturer: Fluke Corporation Brand: Fluke Model: 4357406

The Fluke Flexible Current Probe is a 12" current probe that measures AC to 1,500 amp. This current probe is for use with the Fluke 1730 Three-Phase Energy Logger (sold separately) for conducting energy usage surveys. It measures AC to 1,500 amp to extend the range of the energy logger. The flexible probe is 12" long for coiling around a cable under test. The probe connects to the energy logger vial a 6' cord. It meets International Electrotechnical Commission (IEC) safety standard 61010-1, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V. It comes in a set of three.SpecificationsRange1 to 150 amp AC / 10 to 1,500 amp ACAccuracy (with the 1730 Energy Logger)+ or - (1% of reading + 0.02% of range)Coil length12"Cable length2m/6.6'Installation ratingCAT IV, 600V; CAT III 1,000VStandards metEN safety standard 61010, CE marking, Canadian Standards Association, Australian EMCIngress protectionIP50Weight115gIndustrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Brand: Fluke Model: 4636915

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-SPIBUS TD

Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/zoom ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to SPI serial data. The decode operation is fast-even with long acquisitions. The user can choose to decode into hex, binary, or ASCII formats. Completely isolate specific SPI message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. Of course, all the basic SPI triggering capability you would expect is also included. The SPI trigger can be configured for a range of CPOL and CPHA settings as well as the Simplified SPI protocol. Turn your oscilloscope into a protocol analyzer with the Table display of protocol information. Custom configure the Table to display only the information you want, and export Table data to an Excel file. Touch a message in the table and automatically zoom for detail. In all cases, the Table never obscures your waveform data. SPI messages can be quickly located by searching on DATA. Pressing an arrow button advances the single zoomed message view one message to the right or left of the current message. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.

Manufacturer: Tektronix, Inc. Brand: Tektronix

TPSBAT Battery Pack Shown with TPSCHG Charger