Oscilloscope Accessories - Page 20

Manufacturer: Fluke Corporation Brand: Fluke Model: 419D Color: Multicolored

The Fluke 419D professional-grade laser distance meter extends your reach to 80 meters (260 feet) with even greater accuracy. It saves you time and reduces errors with enhanced features like storage for 20 complete displays and a tripod mode for stable, long-distance measurements. Measure up to 80 m (260 ft). Higher accuracy: +/-1 mm (0.04 in). View more data with backlit, three-line display. Full Pythagoras function for height measurements. Storage of 20 complete displays for quick recall. Audible keypad feedback. Minimum/Maximum function. Tripod mode for mounting meter on a tripod when measuring long distances. Stake Out feature helps you mark out defined lengths such as when constructing wooden frames. Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point. Enhanced environmental protection:IP54-rated as dust and water spray resistant. Improved battery life of 5000 measurements with auto laser off and auto power off features. Typical measuring tolerance[1]- +/- 1.0 mm[3]. Maximum measuring tolerance[2]- +/- 2.0mm[3]. Range at Leica target plate GZM26- 80m/260'. Typical range[1]- 80m/260'. Range at unfavorable condition[4]- 60m/195'. Smallest unit displayed- 1mm/1/32". Laser class II. Laser type - 635 nm,

Manufacturer: Fluke Corporation Brand: Fluke Model: 2839604

Fluke universal battery eliminator for 345 power quality clamp meter.

Manufacturer: Fluke Corporation Brand: Fluke Model: 424D Color: Multicolored

FLUKE FLUKE-424D DISTANCE METER, LASER, 100M

Manufacturer: Fluke Brand: Fluke Model: 4112750

Models covered: • Fluke 51 II Single Input Digital Thermometer • Fluke 52 II Dual Input Digital Thermometer • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex • Fluke 789 ProcessMeter • Fluke 1587 Insulation Multimeter • Fluke 1735 Three-Phase Power Quality Logger.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-UART-RS232BUS TD

Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to UART and RS-232 serial data. The decode operation is fast-even with long acquisitions. Choose to decode into hex, binary, or ASCII formats. LeCroy’s decode algorithms allow the CLOCK signal to be input to the external channel, which saves valuable channels for other signals. Or, if the CLOCK signal is input to a channel, it can be turned OFF as desired to reduce display clutter. Completely isolate specific UART or RS-232 message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. The UART trigger 8 and 9-bit formats are supported. Touch a message in the table and automatically zoom for detail. In all cases, the table never obscures your waveform data. UART, and RS-232 messages can be quickly located by searching on DATA. Pressing an arrow button advances the single zoomed message view one message to the right or left of the current message. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. Also compatible with WaveRunner Xi and WaveSurfer Xs having serial numbers of LCRY0608 and LCRY0304 respectively. Oscilloscopes with lower serial numbers can be upgraded. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3463066

Fluke C-range IR window, kwik twist. Increase the safety and speed of indoor and outdoor electrical thermography with these UL and CSA certified IR Windows. These IR Windows has 4-inches diameter. IR Windows provide increased: safety: perform IR scans without opening enclosures - virtually eliminating arc flash risk. Speed: scan a panel in 5 minutes, not 30 minutes. No panel cover removal/replacement. Frequency of inspection: Inspect more often, on your schedule - with instant access. Fluke IR Windows offer NFPA70E compliance without having to compromise on product performance. Clirvu Optic: gives your eyes and your camera a clear, unobstructed view. Auto Ground: effortless compliance with ir windows grounding requirements. Ease of installation: unlike others, fluke ir windows install quickly and easily - mounting to the front of the panel only designed and tested to the highest standards, fluke ir windows are suitable for use indoors and outdoors at virtually any voltage. With a kwik twist cover that magnetically sticks to the panel when removed, fluke ir windows are easy to use and deliver unmatched image clarity through a CLIRVU crystal. Exclusive to fluke ir windows, CLIRVU crystal technology is impervious to both moisture and vibration. Crystal insert diameter: 3.94-inches. Viewing aperture diameter: 3.5-inches. Viewing aperture area: 9.79 square inches. Thickness: 0.16-inches. CLIRVU coating: yes Shortwave IR capable: yes Midwave IR capable: yes. Longwave IR capable: yes. Ultraviolet (UV) capable: yes. Visual capable: yes. Fusion capable: yes. Maximum temperature: gaskets: 250 degrees C (482 degrees F), body: 659 degrees C (1219 degrees F), optic: 1400 degrees C (2552 degrees F). Gaskets: Low smoke and fume (LSF) compliant silic1. IP rating: IP65. NEMA rating: Type 3/12 (UL and CSA Third Party Certified). Vibration rating: IEC60068-2-6. Humidity rating: IEC60068-2-3. Pull-out strength: up to 630 kg (1388-pounds).

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540624

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 1 V to 170 V. Vnom: 100 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.15 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Fluke Corporation Brand: Fluke Model: 28II Color: Multicolored

The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3345753

Fluke 1 phase mini current clamp set for power quality logger. 1A/10A Current.

Manufacturer: Keysight Brand: Keysight

GPIB (also known as IEEE-488 or HPIB) is a standard for instrumentation communication and control and used by many manufacturers.