|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $183.49 4% OFF
Manufacturer: Test Products International, Inc
Brand: TPI
Model: NC12
Manufacturer: Test Products International, Inc
Brand: TPI
Model: NC12
|
Nano Clip Kit. It includes 12 assorted clips (2 black, 2 red, 2 yellow, 2 blue, 2 green, 2 gray), 6 lead sets; ground lead and hold bar. It can access 0.3mm pitch leads that allows you to attached the clip to a lead on the smallest of surface mount IC's for testing the input and/or output of the IC. Normal oscilloscope lead tips are too large and the probe handle is too heavy to access these leads. It ensure minimal signal loss and constant contact with highly conductive gold plating. High Durability with Fluorine Resin coated barrel extension: The barrel of the clip is fully insulated eliminating the chance of the clip shorting to adjacent nano clips, IC leads or components; Fluorine Resin if very rugged and will last the lifetime of the clip. Each nano clip set (excludes individual clips) comes with an exclusive hold bar that connects the clips to together while measuring multiple leads on the same IC. Hot and ground leads are included in each set (excludes individual clips) for easy connection between the nano clip and the tip of the oscilloscope probe. This allows the tip of the oscilloscope probe to be placed outside the measurement area so it does not interfere with the circuitry. Maximum Voltage: 25VDC. Maximum Amperage: 300mADC.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $189.00 1% OFF
Manufacturer: Cal Test Electronics
Brand: Cal Test Electronics
Model: CT3744
Manufacturer: Cal Test Electronics
Brand: Cal Test Electronics
Model: CT3744
This kit contains the most popular and common scope interconnects plus the addition of a deluxe 500 MHz oscilloscope probe with all the probe accessories. Everything needed to start working with your scope or excellent kit to replace all the accessories that seem to have been misplaced. Cost effective replacements for original scope manufactures accessories. Kit included: coax adapter female-male-female tee; BNC female adapter-4mm banana plugs: black; BNC male cable assembly-RG-58 C/U, 100 cm (40"): black; Oscilloscope probe deluxe kit 500 MHz, Lt Gray, 1.2m; BNC male terminator DC to 500 MHz, 50 ohm, +/-1 percent and Cable, BNC-MiniPro Clips 50 ohm, 100 cm (40"):black.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $192.79 4% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS210-G
Color: Gray
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS210-G
Color: Gray
Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. One gray. UL Listed.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $192.79 4% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS212-G
Color: Gray
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS212-G
Color: Gray
Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 18 pF. Compensation range: 10 to 30 pF. Cable length: 2.5m. Color: grey. UL Listed.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $199.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-B
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-B
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $200.00 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BC7217
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BC7217
External Battery Charger, For Graphical Multimeter
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $233.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $239.58 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
|
The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $249.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $269.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP PLUS
Color: White
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP PLUS
Color: White
|
The Fluke FoodPro Plus dual infrared and RTD thermometer takes noncontact or contact temperature measurement and is used to monitor the temperatures of food products and foodservice equipment. This thermometer measures surface temperature from -35 to +275 degrees C (-31 to +527 degrees F) with an infrared sensor and measures internal temperatures from -40 to +200 degrees C (-40 to +392 degrees F) with a built-in fold-out resistance temperature detector (RTD) probe sensor. It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.The Fluke FoodPro Plus shows the maximum temperature for reference. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It has an integrated countdown timer and alarm to help monitor cooking and cooling intervals and food service line inspections. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with one 9V battery, a soft case, a calibration certificate with National Institute of Standards and Technology (NIST) traceability and the German Calibration Service (Deutscher Kalibrierdienst, DKD) traceability, and instructions. SpecificationsInfrared temperature range-35 to +275 degrees C (-31 to +527 degrees F)Infrared sensor accuracy0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degreeDistance-to-spot ratio2.5:1Infrared se...
|
|