Oscilloscopes & Accessories - Page 115

Manufacturer: UY CHAN Brand: UY CHAN

Mini Oscilloscope, Portable and Powerful, Smaller and Safer Functionalities •DSO mini oscilloscope. •Rising/falling edge trigger. •Compact rectangular housing. •Large display screen. •Buttons on the side. •Mini pocket sized. •Compact and lightweight. •Store file as BMP, DAT, BUF, or CSV format. •Use build-in flash disk to save/read waveform image. •Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp. •Output test signal: 10Hz-1MHz (1-2-5 sequence step). •Synchronous mode: auto, normal, single, none, scan. •Auto measurement: frequency/duty cycle, DC RMS voltage/Vpp /Vmax/Vmin. •package includes: oscilloscope probe x 1. Specifications: •Lightweight digital storage oscilloscope. •Coupling: DC/AC. •Max sampling rate: 1 MSa/s. •Analog broadband: 200kHz. •Max sampling memory depth: 8K. •Analog input impedance: 1MΩ. •Max input voltage: ±40Vpp(x1 probe). •Vertical sensitivity: 10mv/Div~10V/Div (1-2-5 sequence step). •Horizontal sensitivity: 1uS/Div~10S/Div (1-2-5 sequence step). •2.8"color TFT LCD display (320×240 pixels). •Recharging through mini USB port. •Internal 500mAh lithium battery. •Weight: 65g.

Manufacturer: Probe Master Brand: Probe Master Model: 4904-4KRA

Oscilloscope probe with readout actuator, 100MHz, 10X, 600V, 10ft, DELUXE KIT

Manufacturer: LeCroy Corporation Brand: LeCroy Model: PP016

Recommended for WaveAce Series (200MHz) Oscilloscopes. Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MO. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. Each passive probe is recommended for a certain oscilloscope. Bandwidth (probe only): 300 MHz/10 MHz. Input resistance: 10 MO/1 MO. Input capacitance: 12 pF/46 pF. Maximum input voltage: 600 V. Attenuation: 10:1/1:1. Coupling: AC 1 MO, DC 1MO, Ground. Operating temperature: 5 to 40 degree C (41 to 122 degree F). Humidity: 80 percent maximum from 5 to 31 degree C. Storage temperature: -20 to 70 degree C (-4 to 160 degree F). 2000 Meter maximum altitude. 5 Millimeter probe diameter. 1.2 Meter cable length. BNC Interface. Attenuation sense pin.

Manufacturer: Rigol Brand: Rigol Model: RM-DS1000Z/DG4000

Rack Mounting Kit for a DS1000Z Series Oscilloscope or DG4000 Series generator. May be different than image. Rack kits are different for each instrument.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: Fluke Corporation Brand: Fluke Model: PT12

Pitot tube for 922 airflow meter. Pressure sensitive to aid in measurement and data gathering. 12" Length.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530837

Fluke quick disconnect cable.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-R Color: Red

ScopeMeter Compact Probe for electronic applications, red, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Docooler Brand: Docooler

This handheld digital oscilloscope with multiple functions is really practical for use. Its sampling rate is 200MSa/s and its bandwidth is 20MHz. It also has the signal generator function which can measure frequency(sine wave 1Hz-5MHz; others 1Hz-1MHz), duty cycle, amplitude and offset. Specifications Display: Full Color TFT LCD Display(320*240 pixels) Sampling Rate: 200MSa/s Channel: 1 Bandwidth: 20MHz Input Range: 10mV-5V x1; 100mV-50V x10; 1V-500V x100(1-2-5 Step)  Vertical Resolution: 8bit Vertical Accuracy: +/-3% Impedance: 1MΩ 25pF Coupling: AC/DC Display Mode: YT Input Voltage: 40V(x1); 400V(x10); 4000V(x100) Time Range: 10ns-50ms(1,2.5,5 step) 100ms-5s(scan scan) Storage Depth: 2K Trigger Mode: Automatic, Normal, Single Trigger Type: Rising/Falling Edge Trigger Automatic Measurement: 50Hz-40MHz Measurement: Peak to Peak/Duty Cycle/Frequency Cursor: Time, Voltage Frequency: Sine Wave 1Hz-5MHz; Others 1Hz-1MHz Duty Cycle: 0%-100% Amplitude: 100mV-4V Offset: (+/-)0V-2V Power Supply: 1 * 18650 3.7V Battery(NOT Included) Product Size: 217 * 100 * 35mm / 8.54 * 3.94 * 1.4in Product Weight: 340g / 12oz Package Size: 25 * 20.5 * 6.6cm / 9.84 * 8.07 * 2.6in Package Weight: Approx. 872g / 30.76ozWhat is in the box 1 * Oscilloscope 1 * Signal Generator Probe  1 * Oscilloscope Probe  1 * Battery Charger 1 * USB Cable 1 * Screen Protector 1 * Storage Bag 1 * CD

Manufacturer: AGILENT TECHNOLOGIES Brand: Agilent Technologies

AGILENT TECHNOLOGIES U1562A 100:1 Oscilloscope Test Probe