Oscilloscopes & Accessories - Page 11

Manufacturer: Hantek Electronic Co.,Ltd Brand: Hantek

Brand new Professional 60MHz, 2 Channel, 5-IN-1 oscilloscope with built-in Logic Analyzer, Arbitrary Waveform Generator, FFT Spectrum Analyzer and Frequency Counter

Manufacturer: Fluke Corporation Brand: Fluke Model: I310S

The i310s current probe is based on hall effect technology for use in measurement of both DC and AC current. The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Current ranges: 30A and 300A AC rms or +/-45A and 450A DC. Measuring Ranges: +/-45A and 450A DC. Output Sensitivity: 10 mV/A (40A) to 1 mV/A (400A). Resolution: +/-50 mA (40A) to +/-100 mA (400A). Load impedance: greater than 10 k Ohms and less than or equal to 100 pF. Frequency range (small signal): DC to 20 kHz (- 3 dB). Phase shift below 1 kHz, less than 2 degrees. Temperature coefficient: +/-0.1 percent of reading / degree C. Power Supply: 9V Alkaline, MN1604/PP3. Battery life: 30 hours, low battery indicator. Inrush current: 600A AC rms maximum. Accuracy (at +23 degree C): (30A range) +/-1 percent of reading +/-50 mA, (300A range) +/-1 percent of reading +/-300 mA. Bandwidth to meet accuracy specification: 1 kHz. Conductor position sensitivity: +/-1.5 percent relative to centre reading. Working voltage: 300V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: safety BNC connector, supplied with safety 4mm adaptor. Output zero: manual adjust via thumbwheel. Cable length: 2m. Operating temperature range: -10 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). EMC Standards: BS EN 61236 1998 +A1, A2, and A3.

Manufacturer: Pico Brand: Pico

.da-1-4 { width: 23%; } .da-img { max-width: 100%; height: auto; margin: auto; } .da-ProdBody{ padding: 2%; margin: 0 auto; } .cr-list { list-style-image: url(/assets/1/7/850c3d3a3b4b40e68a2a2327508d61531.png); } .da-sm-img{ box-shadow: 1px 2px 3px #eeeeee; border-radius: 5px; } .da-sm-img:hover{ box-shadow: 1px 1px 2px 1px #aaa; transition: all 0.5s ease-in-out; } .da-overlay { position: fixed; top: 0; bottom: 0; left: 0; right: 0; background: rgba(0, 0, 0, 0.7); transition: opacity 50ms; visibility: hidden; opacity: 0; z-index: 1000; } .da-overlay:target { visibility: visible; opacity: 1; } .da-popup-img { margin: 70px auto; padding: 16px; background: #fff; border-radius: 5px; width: 50%; position: relative; transition: all 0.5s ease-in-out; max-width: 800px; } .da-popup-img h2 { margin-top: 0; color: #333; font-size:14px; } .da-popup-img .da-close { position: absolute; top: 0px; right: 10px; transition: none; font-size: 30px; font-weight: bold; text-decoration: none; color: #333; } .da-popup-img .da-close:hover { color: #888888; } .da-popup-img .da-content { max-height: 30%; overflow: auto; } .cr-stdwrp li {height: 38px; background: url('https://assets.tequipment.net/assets/1/7/RedCheckMark.png') no-repeat left top; background-size: 36px 36px; padding: 3px 0px 3px 40px; /* reset styles (optional): */ list-style: none; font-size: 20px; }

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1054B

The GW INSTEK GDS-1000B series demonstrates the impeccable functionalities with an extremely ordinary pricing, which allows customers to realize the true meaning of bigger bang for the buck. Although, the GDS-1000B series is under the category of general purpose oscilloscope, the full functionalities within this simple-in-look oscilloscope, including parameter measurement, cursor indication, digital voltage meter, and data logging, surpasses the same category 1000 series oscilloscopes in the market. All applications of the GDS-1000B series can be applied to the educational field and the fundamental R&D units of the industrial sector.The GDS-1000B series features three bandwidth selections ─ 100 MHz, 70 MHz, 50MHz and equips with analog signal input terminals by four or two channels ( 50MHz only equipped 4 channels input ). The maximum sampling rate for each single channel is 1GSa/s, and the memory depth is 10Mpts per channel independently. The waveform update rate is 50,000wfms/s, which helps users to precisely observe the detailed waveform variation. Additionally, 7” WVGA color LCD display and the 256 color gradient display function together allow waveforms to be observed with the senses of transparency and gradation. With respect to the horizontal time scale adjustment knob and trigger level adjustment knob, GW Instek provides a very thoughtful design ─the zero key function, which allows engineers to work more effectively.For mathematical analysis mode, 1Mpts FFT signal display makes the dull frequency domain signal analysis more delicate. Diversified trigger functions, X-Y mode analysis, and Go/NoGo function arm the GDS-1000B series oscilloscope with higher level measurement technologies. The GDS-1000B series oscilloscope also provides Open Wave connection software, which allows users to conduct waveform observation and data storage controlled by remote PC.

Manufacturer: Fluke Corporation Brand: Fluke Model: PV350

The PV350 pressure/vacuum transducer module (the module) measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1 mV dc per unit. A module and a high-performance digital multimeter (DMM) with min/max function become a data logger capable of measuring peak high and peak low. The PV350 is compatible with industrial gases and liquids that are compatible with 316 stainless steel. To determine the compatibility of a liquid or gas, refer to the manufacturer's specifications. When making measurements on more than one type of pressure system, make sure the fluids or gases in those systems are compatible. If they are not, contamination or damage to the system being measured may result. Battery: standard 9 V battery (NEDA #1604, 6F22, 006P). Battery life: 300 hours (typical) for carbon-zinc 400 hour (typical) for Alkaline. Vibration: 3 g at 55 Hz sinusoidal. Shock: 1 meter drop. Electrical cable: black PVC, will withstand up to 105 degree C. Cable length: 8'. Pressure port connection: 1/4" NPT. Connector: brass 1/4" male flare to 1/4" female pipe thread. Pressure range: 350 to 500 psig (2413 to 3447 kPa), accuracy: +/-5 percent of reading +/-1 psig typical (+/-5 percent +/-7.0 kPa) Vacuum range: 0 to 29.9" Hg (0 to 76 cm-Hg), accuracy: +/-1 percent of reading +/-0.5 in-Hg (+/-1 percent of reading +/-1.3 cm-Hg). Output: 1 mV per unit (psi, kPa, cm-Hg or in-Hg). Resolution: 0.1 psi/in-Hg in mV range, 1 psi/in-Hg in volt range with 3-1/2 or 4-digit meters. RFI Specification: Typically less than 1 percent error from 14 kHz to 30 MHz at 1 V/M. Meter input impedance: greater than or equal to 10 M ohms. Maximum working pressure: 500 psi. Burst pressure: 1000 psi. Storage temperature: -51 to 71 degree C.

Manufacturer: Sain Store Brand: OWON

Features * SDS7102 100 MHz Deep Memory DSO with 10 M points memory, 2 channels. * New hardware version with standard LAN interface. * This model also includes the VGA interface. * Serial number SDS710212190xx Package Content 1 x Owon Oscilloscope 2 x probe 1 x power cable 1 x USB cable 1 x user manual 1 x CD with software. Note: If you need more information about the product, please download here for the new user manual: http://media.nkcelectronics.com/datasheet/SDS Series Oscilloscopes USER_MANUAL_V1.5.0.pdf

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1503

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV400

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Hantek Brand: Hantek Model: 3064a

Feature: 4 Channel and EXT trigger, 60MHz Bandwidth 200MSa/s real-time sampling rate,10k-16M memory depth per Channel Arbitrary Waveform Generator 25MHz arbitrary waveform output,(sine wave can deliver up to 75MHz) 200MSa/s DDS,12bits of vertical resolution Frequency Counter,FFT spectrum analysis USB 2.0 interface plug and play Frequency Counter,FFT spectrum analysis More than 20 kinds of automatic measurement function,PASS/FAIL Check function, is suitable for engineering application Excellent industrial design, similar interface with bench oscilloscope ,Easy to use Supply DEMO code (VC,VB,LABVIEW) and technical support Software support : Windows NT, Windows 2000, Windows XP ,VISTA,Windows 7 One Year Manufacturer Warranty Package Includes: 1.The Digital Oscilloscope DSO 3064A 2.The Software and User Mnaul CD Package 4.Probe×2 (1.5m), 1:1, (10:1) Passive Probes 5.The USB cord.

Manufacturer: Hantek Brand: Hantek Model: DSO8060

Specifications: ●Model:DSO8060 ●Bandwidth:60MHz ●Channel:2 ●Real-Sample Rate:250MSa/s ●Equivalent Sample Rate:50GSa/s ●Record Length:32K ●Rish time:≤5.8ns ●Timebase Accuracy:±50ppm ●Time Base Range:5ns/div-1000s/div ●Video Help:-- ●SD Card:-- ●Input Impandance:1MΩ ΙΙ 15pF ●VOLTS/DIV Range:10mV/div～5V/div ●A/D Converter:8bit ●Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div), ±400mV(20mV/div～2mV/div) ●Bandwidth Limit:20MHz ●Trigger Types:Edge,Video,Pulse, Alternative ●Trigger Source:CH1,CH2 ●Math:+,-,x,÷,FFT,Invert ●Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); ●Waveform Frequency:DC~25MHz ●DAC Clock:2K~200MHz adjustable ●Frequency Resolution:0.10% ●Channel count:1CH waveform output ●Waveform Depth:4KSa ●Vertical Resolution:12 bit ●Frequency Stability: 100KΩ ●DMM Max. Resolution:6,000 Counts ●Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity ●Max. Input Voltage:AC: 600V, DC: 800V ●Max. Input Current:AC:10A , DC: 10A