|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $559.63 1% OFF
Manufacturer: Hantek Electronic Co.,Ltd
Brand: Hantek
Model: DSO1200
Color: White
Manufacturer: Hantek Electronic Co.,Ltd
Brand: Hantek
Model: DSO1200
Color: White
Hantek DSO1200 is a handheld double-channel digital oscilloscope with installed multimeter. Bandwidth is 200MHz. Real-time sampling rate is 500MSa/s.
DSO1000 Series digital oscilloscopes offer exceptional waveform viewing and measurements in a compact, lightweight package (245 × 163 × 52 mm). This handheld digital oscilloscope is ideal for production test, field service, research, design, education and training involving applications of analog circuit tests and troubleshooting.
Hantek DSO1200 is the double-channel digital oscilloscope with installed multimeter. Bandwidth is 200MHz. Real-time sampling rate is 500MSa/s. Multimeter mode allows user to measure AC/DC current and voltage, resistance, capacitance, continuity and test diodes.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $562.49 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I30S
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I30S
|
The i30s current clamp is based on hall effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Specified current range: 30 mA to 30A DC, 30 mA to 20 A AC rms. Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms. Crest factor: 1.4". Output sensitivity: 100 mV/A. Accuracy (at +25 degree C): +/-1 percent of reading +/-2 mA. Resolution: +/-1 mA. Load impedance: greater than 100 kilo ohm. Conductor position sensitivity: +/-1 percent relative to center reading. Frequency range: DC to 100 kHz (- 0.5 dB). Phase shift below 1 kHz: less than 2 degrees. Temperature coefficient: +/-0.01 percent of reading/degree C. Power supply: 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator. Working voltage (see Safety Standards section): 300 V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: Safety BNC connector, supplied with safety 4mm adapter. Output zero: Manual adjust via thumbwheel. Cable length: 2 meters. Operating temperature range: 0 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). Safety standards: BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, 300 Vrms, Category III, Pollution Degree 2, Use of the probe on uninsulated conductors is limited to 300 V AC RMS or dc and frequencies below 1 kHz. EMC Standards: EN 61326: 1998 +A1, A2, and A3. Measures 71mm width by 183mm height by 25mm depth.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $572.00
Manufacturer: Hantek
Brand: Hantek
Manufacturer: Hantek
Brand: Hantek
Feature:
Five-in-one Handheld Oscilloscope
Oscilloscope/DMM/ Spectrum Analyzer/Frequency Counter/Arbtrary Waveform generator
60MHz Oscilloscope
Seperated GND Reference
Hardware Frequency Counter
Arbitrary Waveform Generator:25Mz arbitrary waveform output
6000 COUNTS high precision DMM
(sine wave can deliver up to 75 Mz) 200 MSa / s DDS, 12 bits of vertical resolution
PASS/FAIL Check ,easy to use on production line
l FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements
High refresh rate
High Real-time Sample Rate 150MS/s-2GS/s
50GS/s Equivalent-time Sample Rate
2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency
1000 waveforms save and record
One Year Manufacturer Warranty
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $585.00
Manufacturer: GW Instek
Brand: GW Instek
Model: GDS-1074B
Manufacturer: GW Instek
Brand: GW Instek
Model: GDS-1074B
|
The GW INSTEK GDS-1000B series demonstrates the impeccable functionalities with an extremely ordinary pricing, which allows customers to realize the true meaning of bigger bang for the buck. Although, the GDS-1000B series is under the category of general purpose oscilloscope, the full functionalities within this simple-in-look oscilloscope, including parameter measurement, cursor indication, digital voltage meter, and data logging, surpasses the same category 1000 series oscilloscopes in the market. All applications of the GDS-1000B series can be applied to the educational field and the fundamental R&D units of the industrial sector.The GDS-1000B series features three bandwidth selections ─ 100 MHz, 70 MHz, 50MHz and equips with analog signal input terminals by four or two channels ( 50MHz only equipped 4 channels input ). The maximum sampling rate for each single channel is 1GSa/s, and the memory depth is 10Mpts per channel independently. The waveform update rate is 50,000wfms/s, which helps users to precisely observe the detailed waveform variation. Additionally, 7†WVGA color LCD display and the 256 color gradient display function together allow waveforms to be observed with the senses of transparency and gradation. With respect to the horizontal time scale adjustment knob and trigger level adjustment knob, GW Instek provides a very thoughtful design ─the zero key function, which allows engineers to work more effectively.For mathematical analysis mode, 1Mpts FFT signal display makes the dull frequency domain signal analysis more delicate. Diversified trigger functions, X-Y mode analysis, and Go/NoGo function arm the GDS-1000B series oscilloscope with higher level measurement technologies. The GDS-1000B series oscilloscope also provides Open Wave connection software, which allows users to conduct waveform observation and data storage controlled by remote PC.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $599.95 1% OFF
Manufacturer: Digilent
Brand: Digilent
Manufacturer: Digilent
Brand: Digilent
|
The Digilent Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design and test analog and digital circuits of all types.
Built around a large solderless breadboard, the EE board includes oscilloscopes, waveform generators, power supplies, voltmeters, reference voltage generators, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires.
Designed for daily use and intended for every student to own, the EE board combines everything needed to design and test circuits in a single "all in one" device. Even in introductory classes, students can complete, test, and analyze real circuit designs as a part of every homework assignment. No more once a week labs; now every student can complete designs in virtually any setting - any residence can be a complete, 24-hour design studio!
The EE board is powered by the free, PC-based WaveFormsTM software that makes it easy to acquire, store, analyze, produce and reuse analog and digital signals. WaveFormsTM runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time.
WaveFormsTM data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student lab/project reports can be completed using standard office tools, and submitted electronically.
Additional Product Information
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $625.00 11% OFF
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDG5082
Color: White
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDG5082
Color: White
|
The Siglent SDG5082 is an 80MHz two-channel combined function generator and arbitrary waveform generator for use with Siglent digital storage oscilloscopes (sold separately) in electronic design, sensor simulation, and functional testing. It has a real-time sample rate of 500MS/s with 1μHz frequency resolution and 14 bits vertical resolution. The function generator uses Direct Digital Synthesis (DDS) output for precise frequency generation. The arbitrary waveform generator produces sine, square, ramp, pulse, gaussian white noise, and DC output signals. Additional specifications include 2ppm high frequency stability and -116dBc/Hz low-phase noise. The unit has a 4.3" color TFT-LCD (480 x 272 pixels) for waveform output display. The USB interface connects to compatible PCs using supplied software. It meets Ingress Protection IP20 standard for resistance to water and dust and meets European Standard (EN) and International Electrotechnical Commission (IEC) 61010 safety standards.SpecificationsBandwidth80MHzChannelsTwoDisplay4.3" TFT-LCD (480 x 272 pixels)Power100 to 240V power adapterWeight2.8kgDimensions (H x W x D)105 x 261 x 344 mmH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Siglent manufactures electronics test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 2002 and headquartered in Shenzhen, China, meets International Organization for Standardization (ISO) standards 9001:2000 and 14001:2004.What's in the Box?SDG5082 function/arbitrary waveform generatorUSB cablePower adapterUser manualSoftwareCalibration certificate
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $694.00 14% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-705
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-705
|
Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops. A large display and simple, pushbutton interface for ease of use. Simultaneous mA and percent readout for quick, easy interpretation of readings. mA accuracy of 0.02 percent. Push button 25 percent steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes. 0.02 percent accuracy and 0.001 mA resolution. Simultaneous mA and percent of span display. Selectable step or ramp outputs. 24V Loop supply with mA measure. 0-28 VDC measurement to check Loop Voltage. Easy battery exchange without opening the case. Compact case with separate protective holster. 3 year warranty. Current measurement: : 0 to 24 mA range, 0.001 mA resolution, 0.02 percent Rdg + 2 LSD accuracy. Voltage measurement: : 0 to 28V DC range, 1 mV resolution, 0.025 percent Rdg + 2 LSD accuracy. Loop power: while measuring mA, 24V. Operating temperature: -10/55 degree C. Storage temperature: -40/60 degree C. Measures 152mm length by 70mm width by 41mm depth. Loop calibrator including: AC70A alligator clips, C10 protective yellow holster with Flex-Stand, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data. Weight: 340g.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $719.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-707
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-707
|
Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new "Quick Click" knob making it extremely fast and easy to use. Large display and simple, quick-click interface for easy one-handed operation. Simultaneous mA and percent readout for quick, easy interpretation of readings. mA accuracy of 0.015 percent, superior to other loop calibrators in this price range. 1 microampere resolution for mA source, simulate and measure. Push button 25 percent steps for fast, easy linearity checks. 0-100 percent "span check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Measures V dc to 28V. Single 9V battery that is easily changed without braking calibration seal 0 - 20 mA or 4 - 20 mA default start up modes. Innovative output adjustment dial with 1 microampere and 100 resolution. HART mode connects 250 O resistor in series with 24 V loop for compatibility with HART communicators. Current measurement: : 0 to 24 mA range, 0.001 mA resolution, 0.015 percent Rdg + 2 LSD accuracy. Voltage measurement: : 0 to 28V DC range, 1 mV resolution, 0.015 percent Rdg + 2 LSD accuracy. Loop power: while measuring mA, 24V. Operating temperature: -10/55 degree C. Storage temperature: -30/60 degree C. Measures 152mm length by 70mm width by 41mm depth. Including: protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, NIST- traceable calibration report and data. Weight: approx. 330 g (21 oz)
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $764.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-355
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-355
|
The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 2,000A (amperes) (1,400A AC RMS). The clamp has two jaws that can close around an electrical conductor up to 58mm (2.3 inches) in diameter to measure the current of large or multiple conductors without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 600V, DC voltage to 1,000V, frequency to 1kHz (kilohertz), and resistance to 400kΩ (kilohms). The test leads are silicone-insulated for flexibility and resistance to heat and cold. The meter has a rotary switch to select the property to measure, and an LCD with a backlight for visibility in low light that turns off automatically after five minutes.The meter's inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements. It features a low-pass filter that reduces high-frequency interference to allow accurate measurements of complex wave shapes. The minimum/maximum function toggles to display the lowest, highest, and average readings. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on six 1.5V AA batteries, and turns off automatically after 20 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range bein...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $879.00 1% OFF
Manufacturer: Rigol
Brand: Rigol
Model: DS1104Z Plus
Manufacturer: Rigol
Brand: Rigol
Model: DS1104Z Plus
|
Rigol DS1104Z Plus 100 MHz Digital Oscilloscope    Best Selling Oscilloscope The DS1104Z Plus is a high quality 4 channel 100 MHz oscilloscope with a 1G Sa/s real time sampling rate. This scope also includes a 7" WVGA intensity graded color display for easy viewing. The DS1104Z Plus features an easily accessible source control button and 4 easy to access analog channel ports. With an industry leading 12 Mpts memory (upgradeable to 24 Mpts) and a waveform capture rate of up to 30,000 wfms/s, the DS1104Z Plus is a great solution for nearly any application. *Image shown is with Optional MSO Add-on Kit: RPL1116 DS1104Z Plus Features 100 MHz Analog Bandwidth Total of 4 Analog Channels 1G Sa/s Real-time Sample Rate Expandable to 16 total digital channels with optional upgrade Maximum Waveform Capture Rate of up to 30,000 wfms/s Includes 4 RP2200 150 MHz Passive HighZ Probes Low noise floor USB Host for Thumb Drive Large 7" Display 12 Mpts of Memory - upgradeable to 24   What makes the "Plus" so special? The new Rigol DS1104Z Plus now features a digital logic connection next to the USB port. Simply by purchasing the MSO Upgrade Package, users will now have the equivalent of Rigol's MSO scopes. This connection allows users to unlock an additional 16 digital channels on their oscilloscope. UltraVision Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1104Z Plus also provides the ability to quickly focus in on certain piece of a recorded waveform. UltraVision × Full Visibility × Full Visibility The large 7" display of the DS1104Z Plus, with a resolution of 800 X 480 pixels makes it possible to view all channels on a single screen. This makes for better usability and more efficient analysis
|
|