Oscilloscopes & Accessories - Page 20

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-I2CBUS TD

Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/zoom ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to I2C serial data. The decode operation is fast-even with long acquisitions. The user can choose to decode into hex, binary, or ASCII formats. Completely isolate specific I2C message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. It can also aid in monitoring DATA outputs from I2C-based sensors, such as analog-to digital converters, and triggering when DATA is outside a safe operating range. In both cases, verifying proper operation becomes a simple task. Of course, all the basic I2C triggering capability you would expect is also included. Turn your oscilloscope into a protocol analyzer with the Table display of protocol information. Custom configure the table to display only the information you want, and export table data to an excel file. Touch a message in the table and automatically zoom for detail. In all cases, the table never obscures your waveform data. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.

Manufacturer: Virtins Technology Brand: Virtins Technology

1. Package Contents: (1) VT DSO-2A20E unit with a hardware activated Multi-Instrument Standard software license. (2) 2 × 100MHz Oscilloscope Probe P6100 with two switchable positions: × 1, × 10. (3) 1m Signal Generator Test Lead. (4) 1.5m USB cable. (5)CD (contains the copy-protected Multi-Instrument software). 2. Applications: (1) Ordinary oscilloscope, spectrum analyzer and signal generator functions, all of which work simultaneously. (2) DUT (Device Under Test) analysis such as frequency response. (3) High resolution and low noises at lower sampling rates, 12 voltage ranges from full scale +/-10mV to +/-50V, and support of sensor calibration make it suitable to work as a data acquisition device. (4) Signal Recording and Replaying.....

Manufacturer: Hioki Brand: Hioki

RS-232C Interface for 3157 By connecting the 9593-02 RS-232C INTERFACE to the 3157 AC GROUNDING HiTESTER, it is possible to control all the functions of the main unit (except for powering on and off) via the RS-232C bus.

Manufacturer: INSTEK Brand: GW Instek Model: GDS1102-U

100 MHz Bandwidth with 2 Input Channels 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling 4k Memory Length per Channel Peak Detect as Fast as 10ns Save/Recall of 15 Front Panel Settings & Waveforms 5.7" TFT Color Display 19 Auto Measurements Arithmetic Operators - Add, Subtract, FFT USB Port for PC Connection Data Logger Limited Lifetime Warranty

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

The AC / DC current probes have been designed for reliable and accurate, contactless measurement of AC, DC and complex waveform currents. Their special characteristics make these current probes high-performance instruments for the measurement of inverters, switched-mode power supply units, industrial control systems and other applications which require current measurement or waveform analysis.

Manufacturer: Hioki Brand: Hioki

Hioki DT4282 Digital Multi Meter Precise and Responsive Professional DMM for Advanced Testing including Inverters The DT4282 is a high-precision 60,000 count DMM with direct 10A input and all of the functions and features required for advanced testing in laboratories and R & D. The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. Field-Proven Strength and Usability DT4200 series Robust design capable of withstanding a drop from a height of 1 m onto concrete To test our products' ability to withstand mechanical shock, we repeatedly drop them from a height of at least 1 m until they break. This drop-testing regime leads to more robust products by fostering a series of design improvements. Preventing instrument failure by keeping out dust If dust gets into the instrument's enclosure, it can cause the device to fail. Since dust can get into the instrument especially easily through the gap around the rotary switch, the DT4200 series incorporates a dustproof part known as an O-ring where the rotary switch is mounted to improve the device's dust resistance. Fast, accurate measurement of the output voltage on the secondary side of an inverter The DT series can accurately measure the voltage on the secondary side of an inverter, just like a power meter. Its low-pass filter rejects harmonic components so that the fundamental wave can be isolated and accurately measured. True RMS measurement for accurate measurement of even distorted current waveforms Current waveforms are often distorted, causing the average-value and true RMS measurement methods to yield different results. To obtain accurate readings, RMS measurement is indispensable

Manufacturer: Hioki Brand: Hioki

Easy, wireless collection of a variety of data types, including voltage input and thermocouple types K and T. Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance.  The Hioki LR8515 Wireless Voltage/Temperature Logger provides easy, wireless collection of a variety of data types, including voltage input and thermocouple types K and T, all in a single device. Note: Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Singapore, Thailand, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Manufacturer: Siglent Technologies Brand: Siglent Model: SDS1072CML-AMZN

Siglent SDS1072CML Bench Oscilloscope (Bandwidth 70MHz) With dual-channel measurements, large color screen and unobtrusive design, the SDS1072CML is a great way to evaluate the status of waveforms and is suitable for use in multiple applications including training centers, calibration laboratories, product quality control and many more. The device’s dual channel capability means it is easily possible to track two measurements at the same time and actively compare the results gained thanks to clear display of each waveform on the device’s 7-inch color display. Different waveforms are also presented in different colors, making identification quick and easy. This device features a number of different settings and features including up to 70MHz bandwidth, 2-channels (with one extension), real time sampling rate of 1GSa/s, equivalent sampling rate of 50GSa/s, memory depth of 2Mpts and multiple trigger types. The SDS1072CML is also suitable for use in many different countries and comes provided with a multiple-language interface. Available languages are English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian and Arabic.

Manufacturer: Instek Brand: GW Instek Model: DS3-PWR

Power analysis software. Power quality/harmonic/ripple/in-rush current measurement.

Manufacturer: Hantek Brand: Hantek DSO1200

Model:DSO1200 Bandwidth:200MHz Channel:2 Real-Sample Rate:500MSa/s Equivalent Sample Rate:50GSa/s Record Length:32K Rish time:≤1.7ns Timebase Accuracy:±50ppm Time Base Range:5ns/div-1000s/div Video Help -- SD Card -- Input Impandance:1MΩ ΙΙ 15pF VOLTS/DIV Range:10mV/div～5V/div A/D Converter:8bit Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div)，±400mV(20mV/div～2mV/div) DC Gain Accuracy:±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div Bandwidth Limit:20MHz Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative Trigger Source:CH1, CH2, Math +,-,x,÷,FFT, Invert Cursor Measurement:Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF DMM Max. Resolution:6,000 Counts Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity Max. Input Voltage:AC: 600V, DC: 800V Max. Input Current:AC:10A , DC: 10A Max. Input Impandance:10MΩ Display:5.7"LED Display, 320*240 dots Size:245mm x 163mm x 52mm Weight:1.3KG(Without Package) Standard Probe:PP200x2