Digital Thermometers - Page 2

Manufacturer: Taylor Precision products Brand: Taylor Precision Products Model: 9878EPR Color: Purple

With its distinctive color, the Taylor Precision Products Allergen Waterproof Digital Pocket Thermometer reminds users to avoid measuring certain foods to avoid allergen cross-contamination. Instantly read temperatures from the easy-to-read LCD display on this waterproof pocket thermometer. With a temperature range of -40 to 500 degrees Fahrenheit or -40 to 260 degrees Celsius, this thermometer recalls minimum and maximum temperatures at the press of a button. This digital thermometer is easily recalibrated and includes a hold setting and a backlit display for easy reading, with auto shut off to preserve the included lithium battery. A 4.5-inch long stainless steel probe stem with step-down tip reaches deep and cleans easily, with a color-coded anti-microbial protective storage sleeve that clips to pockets or straps. With its flattened profile, never worry about the thermometer rolling off tables and other flat surfaces.

Manufacturer: TAYLOR PRECISION PRODUCTS Brand: Taylor Model: 9002575

Digital thermometer has a 1.5mm FDA recommended Step-Down probe. Less than six second response time. Safe-t-guard antimicrobial case and sleeve. Auto/off feature to conserve battery life. Field recalibratable. Accurate within +/-2°f. -40°F to +450°f temperature range. Min/max/hold features. Waterproof and dishwasher safe. Slim profile makes it fit flat in your pocket NSF listed.

Manufacturer: Deltatrak Scientific Brand: Deltatrak Scientific

This heat shield is used to protect DeltaTrak model 12201 digital thermometer.Model #: 12208 117280

Manufacturer: Cardinal Health Brand: Cardinal Health

Quick read reusable digital thermometers from Cardinal Health provide accurate, easy to read temperatures in approximately 10 seconds. An audible alarm beeps once at start-up and has a max of 10 beeps at peak temperature. Included instructions allow for an easy switch between Celsius and Farenheit readings. Probe covers sold separately.

Manufacturer: SunGrow Brand: SunGrow

How do I set up the Digital Betta Thermometer?Ready to go upon arrival, the SunGrow Digital Betta Thermometer includes the device, reader tip, secure suction cups, a 1.5v LR44 button cell battery and 38" long cable. Use a suction cup to attach the device to the outside of your aquarium wall and insert the reader tip into the tank and secure that with the additional suction cup. Do not submerge the LCD display unit under the water. Once installed, simply turn the device on or off by pressing the PWR button for 3-5 seconds.Why do I need to monitor the temperature of my betta tank water?To keep your betta fish healthy, happy and active, make sure that they always have clean water at the appropriate temperature. Heaters can be tempermental; the betta thermometer monitors the water temperature as well as the functioning of your heater. Knowing the current, correct temperature of your betta tank means that you can make proper adjustments to make sure the water temperature is at the ideal temperature for your Betta. Be proactive and save your betta's life. It is also important to know the symptoms in your betta fish that suggest your aquarium water is too hot or too cold. Cooler temperatures will slow down a betta's metabolism causing lethargy, inactivity and loss of appetite. When the temperature gets too high, your betta fish will become overactive and may even start burrowing into the gravel. What is the appropriate water temperature for betta? Ideally, the water in your betta tank should remain between 78° and 80° Fahrenheit (25.5° and 26.5° Celsius). Most likely you will need a heat source and a reliable betta thermometer to monitor the water temperature. Betta fish will die quickly if exposed to temperatures below 56°F or above 95°F. They can survive a short time if exposed to moderately high or low temperatures, but a good rule of thumb is to never let your betta tank's water drop below 74°F (23.5°C).

Manufacturer: Rubbermaid Commercial Products Brand: Rubbermaid Commercial Model: FGTHP302L

Rubbermaid Commercial FGTHP302L Digital Pocket Thermometer, 4-7/8-Inch Stem Length, The pocket thermometer has an easy-to-read extra-large 3/8-inch LCD display. The pocket thermometer has an on/off switch that extends battery life. The hold button retains the temperature until it can be read, making it ideal for busy professional kitchens. The 5-inch stainless steel probe has a protective sheath included. 1.25 inches long by 3.5 inches wide by 9.125 inches high. 1.125 pounds.

Manufacturer: Test Products International, Inc Brand: TPI Model: 306XC

The TPI 306XC auto field-calibrated stem-style digital thermometer with penetration tip is for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. It measures temperature from -50 to 150 degrees C with an accuracy of + or - 1% of the reading. The thermometer can be calibrated in an ice bath to preserve the accuracy of readings. The LCD screen shows the current temperature in degrees Celsius. The stem-style probe is 5" long and has a penetration tip for taking measurements while immersed in liquid or air. A hold function keeps a reading on display so it can be recorded. The body is made from reinforced plastic, which resists impact and wear. It has an ingress protection rating of IP63, meaning it is protected against dust and direct sprays of water at up to 60 degrees from the vertical. The included rubber boot fits onto the bottom of the thermometer body to help protect the thermometer from damage due to accidental drops. The thermometer comes with a sheath that helps protect the stem from damage during transport and storage. The sheath has a clip that can be secured to a pocket for carrying when not in use. The thermometer runs on one LR44 button battery (included). The thermometer automatically turns off after a period of non-use to conserve battery life, and a low battery indicator signals when the battery needs to be replaced.SpecificationsTemperature measurement range-50 to 150 degrees CAccuracy+ or - 1% of readingResolution0.1 degree CSample rate1.5 secondsStem length127 mm/5 in.Tip diameter at sensor3.8 mm/0.15 in.Ingress protection ratingIP63Power supplyLR44 battery (one, included) Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conduc...

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 9374

This is an Optional AC Adapter for the TFS4 Multi-Station Digital Timer.

Manufacturer: Etekcity Brand: Etekcity Model: Lasergrip 1022D Color: Blue

Dual point lasers for ideal distance! Keep a suitable distance to the target, where the two lasers overlap, then you will get the most accurate measurement. Infrared Lens The Infrared lens inside the Laser grip 1022D Thermometer provides temperature readings without the need to touch or come close to anything dangerously hot or cold. You'll be able to effortlessly measure high temperatures, hazardous and inaccessible objects, and even moving targets; such as hot engine parts, cooking surfaces, swimming pools, bath water, wine coolers, hot asphalt, electric bearings, and much more.0.1 - 1.0 Adjustable emissivity! Most organic materials and painted or oxidized surface have an emissivity of 0.95. Other materials, such as polished metal surface, have a different emissivity level, which should be taken into account for accurate temperature measurement. With adjustable emissivity, this thermometer can give you a more reliable result. Specifications Temperature Range: -58℉-1022℉(-50℃-550℃)Accuracy: A2% or 2℉/2℃Distance Spot Ratio: 12:1Emissivity (Adjustable): 0.1-1.0Response Time:

Manufacturer: General Tools & Instruments Brand: General Tools Model: DT520TH

The General Tools and Instruments DT520TH Digital T-Handle Lab Thermometer, 8 Inch Stainless Steel Probe, -58 To 536 Degrees is a T-Handle lab ready thermometer. Device has a Fahrenheit and Celsius toggle switch, on or off switch and data hold. The auto power-off ensures that your battery is preserved. Pocket clip keeps the thermometer in your shirt pocket or pants and always nearby. Powered by one LR44 battery which is included.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS