Thermometers - Page 65

Manufacturer: Etekcity Corporation Tools and Home Improvement Brand: Etekcity Model: 21-TEMP-DT8750-Etek Color: Black/Yellow

NOTE1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm).Simple Operation - Point and Click!Are you looking for an easy way to get accurate temperature measurements? If so, this Etekcity non-contact IR temperature gun is exactly what you need. Just by one press of the trigger, this thermometer will turn on, the laser pointer shows target and the big LCD will read the temperature in less than 0.8 second.16:1 High distance spot ratio!This means you may measure the temp of a smaller area at the same distance compared to other 8:1 or 12:1 thermometers; thus the readings are much more accurate!Features1.Laser targeting system for more precise aiming;2.Greater distance-spot ratio offers accurate results at longer distances;3.Safely measure hazardous or inaccessible objects;4.Standard 9V battery offers 14 hours of cumulative use;5.Auto-shutoff after 15 seconds to increase battery life;6.Instant-read-display on LCD.SpecificationsTemperature Range: -58℉～1382℉(-50℃～750℃ )Accuracy: ±2%Distance Spot Ratio: 16:1Emissivity Adjustable: 0.95(fixed)Response Time and Wavelength: 500ms and (8-14)umRepeatability: ±1% or±1℃Resolution: 0.1℃ or 0.1℉Package Included1x Etekcity Lasergrip 800 thermometer1x 9V DC battery1x User's manual2 Year Warranty by Etekcity

Manufacturer: Thermco Brand: THERMCO

PRECISION SPIRIT-FILLED ARMORED THERMOMETER REFILL, 76mm Immersion -20/150C x 1.0C, 12"

Manufacturer: Thomas Scientific Brand: Thomas Model: 4052

The Thomas Traceable long stem digital thermometer is used for measuring the temperature of liquids in cuvettes, test tubes, flasks, and beakers. The thermometer measures temperature from -50 to 150 degrees C and -58 to 302 degrees F), with an accuracy of + or - 1 degree C. The stainless-steel stem of the thermometer is 8" long and has a diameter of 0.13". The handle of the thermometer is 3 inches long with a diameter of 0.5", with an LCD display with 0.4"-high digits for increased visibility. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas long stem thermometer is used in tissue culturing, chemical experiments, and other scientific functions.SpecificationsPower source(1) Silver-oxide batteryTemperature range-50 to 150 degrees C (-58 to 302 degrees F)Accuracy+ or - 1 degree CStandard metInternational Organization for Standardization (ISO) 17025Stem length8"Stem diameter0.13"Weight0.1lb.Overall length11"Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. It is a registered contractor for the United States Federal Government. The company was founded in 1899 and is headquartered in Philadelphia, PA.What’s in the Box?Thomas...

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC715S

Special Application Thermometers are designed to be used with laboratory equipment. Calibrated against NIST standards to assure accuracy and reproducibility. Some thermometers have enlargements on the stem for proper immersions. Several ranges and immersions to fit all applications.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-39644-00

The Oakton WD-39644-00 infrared thermometer with type K input measures contact and non—contact surface temperature for use in food preparation, field measurements, and mechanical maintenance and troubleshooting. The infrared sensor measures temperature from - 60 to 500 degrees C (- 76 to 932 degrees F), with an accuracy of + or - 2% of the measurement or 2 degrees C/3.6 degrees F, whichever is higher. The type K thermocouple probe measures temperature from - 64 to 1400 degrees C (- 83.2 to 1999 degrees F), with an accuracy of + or - 1% or 1 degree C/1.8 degrees F, whichever is greater. The infrared sensor has an 11:1 distance-to-spot measurement ratio with laser sighting for pinpointing the measurement area. User-selectable audible and visual alarms indicate when the temperature exceeds high and low limits. The memory of the thermometer saves minimum and maximum temperatures, average temperature, and minimum/maximum differential. A lock function allows for continuous measurements without having to hold down a button. The unit has a hold function and selectable auto-off. The Oakton WD-39644-00 is used to measure the temperature of hot and cold food products, electrical connections, engine parts, and other surfaces.SpecificationsInfrared temperature range- 60 to 500 degrees C (-76 to 932 degrees F)Infrared accuracy+ or - 2% or 2 degrees C (3.6 degrees F)Thermocouple temperature range- 64 to 1400 degrees C (-83.2 to 1999 degrees F)Thermocouple accuracy+ or - 1% or 1 degree C/1.8 degrees F)Resolution0.1 degree C/0.1 degree FDistance-to-spot ratio11:1Power supply(2) AAA batteries (included)Weight0.65lb.Dimensions (H x W x D)6 x 3 x 1.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrare...

Manufacturer: Bel-Art Brand: SP Scienceware Model: B60740-0300

This H-B Instrument DURAC Plus armored liquid in glass thermometer has a temperature range of 0 to 205°C. Each partial immersion thermometer is organic liquid filled against white back glass, individually serialized and comes with a Statement of Accuracy indicating accuracy traceable to NIST. Tested and calibrated in an exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Armored thermometers meet or exceed the requirements for physical dimensions and accuracy of ANSI/SAMA Z236.1-1983, where ranges are specified. Each thermometer features an open protective nickel plated brass armor which protects the thermometer from accidental breakage during use and storage. Lower section surrounding the bulb features small openings for circulation. Fitted with screw cap and ring top. Individually packaged. Casing: Nickel Plated Brass Armor. Range: 0 to 205°C. Divisions: 1°. Length: 305mm (12 Inches). Immersion length: 76mm (3 Inches). Accuracy: 1°C, 1.5°C Above 105°C. Thermometer Fill Type: Organic. Glass Type: White Back. Traceable to NIST: Yes. Traceable to DKD/PTB: No. 25/Case. H-B Instrument #: 4/0205. Per Each. HB Instrument #: 4/0205.

Manufacturer: Forestfish Brand: Forestfish Model: E4100-09 Color: Type1

Overview: The Forestfish infrared thermometer is the latest in health and thermometer technology. Batteries are included. Instantly take the temperature of the human body or surface temperature of an object with just the press of a button. This handheld and non-contact system is easy to use and is safe for all ages. Quick and simple operation allows you to take the body temperature of a child or baby without any discomfort. Specifications: Temperature Range: -58℉~716℉ / -50℃ to +380℃ Accuracy: ±0.3℃（±0.54℉） Measuring Distance: ≤2 inch Display: Backlit LCD Repeatability: ±1% or ±1℃ Resolution: 0.1°C or 0.1°F Storage Temperature: 0-55°C (32-131°F) Operation Temperature: 10-40°C (50-104°F) Power: 9V or 2 pieces AAA batteries (Included) Dimensions: 7*3.5*1.7 inch Weight: 4.3 ounce Good to Know: 1. There may be temperature difference depending on various skin types and thickness. 2. The temperature of the human body is different in the day, it can also be influenced by numerous external factors: Age, sex, type and thickness of skin. 3. The LCD will display "HI" and "LO" when the temperature is beyond measuring range. 4. Please do not touch the protective glass over the lens and keep it clean. 5. Please make the measurement distance in 2 inch, make your forehead keep dry and unshielded and note laser radiation do not stare into beam. Package and Warranty: 1*Non-contact infrared thermometer; 1*User Manual; 30 days money back, 1 year warranty.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Series BT Bimetal Thermometers offer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging. The bimetal element directly drives pointer, eliminating gears and linkage. An external reset screw allows field calibration and easy-to-read aluminum dial minimizes parallax error. Choose back connection, lower connection, or adjustable angle for easy viewing and installation. Adjustable models can be rotated a full 360° and tilted over a 180° arc. NOTE: When using in pressurized applications, use a suitable thermowell.

Manufacturer: Thermco Brand: THERMCO

PRECISION SPIRIT-FILLED ARMORED THERMOMETER REFILL, 76mm Immersion -10/200C x 1.0C, 12"

Manufacturer: Thomas Scientific Brand: Thomas Model: 4475

The Thomas Traceable Mini IR thermometer measures surface temperature from a safe difference for use in manufacturing, electrical, industrial, and food-service systems. The thermometer measures temperature from -22 to 110 degrees C (-22 to 230 degrees F), with an accuracy of + or - 1 degree C, from 15 to 40 C and + or - 1.5 degrees C outside this range. The thermometer has a 1 to 1 distance-to-spot measurement ratio to take measurements from up to 10 inches away. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas Traceable Mini IR Thermometer is used to measure the temperature of hot and cold food products, heating and air conditioning units, electrical connections, engine parts, and other surfaces.SpecificationsPower source(1) 3V lithium batteryTemperature range-22 to 110 degrees C (-22 to 230 degrees F)Accuracy+ or - 1 degree C between 15 and 40 degrees C and + or -1.5 C outside this rangeResolution0.1 degree C/0.1 degree CStandard metInternational Organization for Standardization (ISO) 17025Distance-to-spot ratio1:1Weight32 g/1 oz.Dimensions (H x W x D)68 x 37 x 18mm/2.5 x 1.5 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment.Thomas Scientific manu...