Temperature & Humidity - Page 314

Manufacturer: Weiss Instruments Brand: Weiss Instruments

Weiss Instruments Remote Reading Dial Thermometer 25HL-060. Flange Type: Flange-less, NSF Approval: Yes, Diameter: 2.5", Temp. Range: -40��F to +60��F.

Manufacturer: Sonin Brand: Sonin Model: 50270

The Sonin Digital Moisture Meter 270 for WOOD measures moisture content in soft and hard woods from 2 to 70-Percent with 0.5-Percent resolution. Protective pouch and replacement probes included.

Manufacturer: Physitemp Brand: Physitemp

Thermocouple Sensor Type J, Iron-Constantan Needle Probe, 21Ga

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 120C 6W Break

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 65C 6W Break

Manufacturer: JB Prince Brand: JB Prince Color: White

Laser ThermometerA great feature of infrared thermometers is that they do not require physical contact to measure the temperature of an item. Simply hold the IR thermometer gun press the trigger and aim the laser guide at the target. Results immediately appear in ºC or ºF on the backlit LCD and are automatically held for 6 seconds after the trigger is released. Has auto power off and an 8:1 distance to spot ratio (D:S). Rugged and ergonomically designed this infrared thermometer gun comes complete with batteries and measures up to 605 degrees F (320degrees C) in 0.5degrees resolution.0.5º. Range:-4 to 605 ºF (-20 to 320 ºC). Resolution:0.5º. Accuracy:±2% of reading or ±2ºC whichever is greater. 8 length.IR thermometers are used to safely measure the temperature in: Inaccessible hot or hazardous objects in electrical hazmat HVAC and other fields. Moving machinery in factories automobiles and elsewhere. Electrical troubleshooting HVAC energy audits. Avoiding contamination in the food beverage and pharmaceutical industries.

Manufacturer: Thermco Brand: THERMCO

ASTM Cloud and pour S5F non- mercury thermometer, blue spirit filled ASTM Cloud and pour S5F non- mercury thermometer, blue spirit filled, immersion 108mm, length 235mm, Range : -36 to +120degree F, Divisions:2.0degree F. This listing is for Each

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including but not limited to Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Milwaukee

Temperature Range: -30° C to 500° C(-22° F to 932° F) Distance to Spot Ratio: 12 to 1 Basic Accuracy: 1.50% Contact Temperature Input: -40° C to 537° C(-40° F to 998°F) Repeatability: 0.50% Display Resolution: 0.1C (0.1F) Response time: < 500 mS Emissivity: 0.95 HOLD / MAX: YES Display Backlight: YES Display Type: White on Black LCD ALARM (HI / LO): YES Accessory Attachment: Proprietary Rail: Voltage Detector, Magnet Rugged over-molding: YES

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.