Temperature & Humidity - Page 480

Manufacturer: FixtureDisplays Brand: FixtureDisplays

Fixture Displays Set of 8 Portable Temperature & Humidity Meter With Alarm 15599 15599

Manufacturer: Gerbing Brand: Gerbing

Gerbing's Single/Permanent Temp Controller allows you to universally control the temperature of your Gerbing's Heated Apparel. Note: This is best suited for riders controlling 1 heated article. If you plan to eventually get both a jacket, glove, pant etc. we suggest that you purchase the Dual Temp Controller for a better warming experience. Dial in your level of comfort. Digital controller insures that your heated clothing uses only as much power as requested. Wires are UL listed and completely safe, in all weather conditions. Three-Year Warranty. All components except dial and indicator light hidden when mounted. Installs on any accessible panel (some drilling required) Includes complete mounting instructions.

Manufacturer: HEATCRAFT Brand: Heatcraft Model: HET28913701

SPECIFICATIONS Height (Inches): 0.5 Width (Inches): 8.0 Length (Inches): 9.0 Weight (Lbs): 0.22 Haz Material: No Freight: No Returnable: Yes

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD5R 90C 1W Break

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Test Products International, Inc Brand: TPI Model: 340/C1

The TPI 340/C1 water-resistant K-type thermocouple digital thermometer with probe is for use in applications requiring a broad range of temperature measurements, including furnaces, kilns, freezers, and other industrial applications. It measures temperature from -40 to 650 degrees C (-40 to 1200 degrees F), with an accuracy of + or - 1% of the reading plus 4 degrees F. The K-type thermocouple sensor has a broader temperature measurement range than a thermistor sensor but provides lower accuracy. The LCD screen shows the current temperature in degrees Fahrenheit or Celsius. A K-type thermocouple probe is provided for taking measurements, and the meter accepts other K-type thermocouple probes with a sub-mini connection. The included rubber boot fits onto the thermometer body to help protect the thermometer from damage due to accidental drops, and the boot has a tilt stand for propping up the thermometer on a flat surface. The thermometer operates on one 9V battery (included). To conserve battery life, the thermometer automatically turns off after 30 minutes of non-use. A low-battery indicator alerts the operator when the batteries need to be changed. A soft carrying case helps protect the thermometer from damage during transport and storage.SpecificationsTemperature measurement range-40 to 650 degrees C (-40 to 1200 degrees F)Resolution0.1 degree F at up to 999.9 degrees F; 1 degree F at greater than 999.9 degrees FAccuracy+ or - 1% of reading plus 4 degrees FPower supply9V battery (one, included)Weight278 g (9.8 oz.)Dimensions*152 x 77 x 41 mm/6 x 3 x 1.6 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which tou...

Manufacturer: MICROCHIP Brand: MICROCHIP

MICROCHIP MCP2036-I/SL KEYLESS ENTRY AFE, IND SENSOR, 14SOIC

Manufacturer: AMPROBE Brand: Amprobe

' Digital Multimeter, Full Size - Basic Features, 4000 Instrument Counts, Basic DC Accuracy +/-0.80 Percent of Reading + 1 Digit, CAT III 600V, Max. AC Volts 600, Max. DC Volts 600, Max. AC Amps 10, Max. DC Amps 10, Audible Continuity Yes, Max. Ohms 40 megohm, Instrument Frequency Counter Range 10 Hz to 10 MHz, Capacitance Range 0 to 40, 400 nF/4, 40, 100 uF, Display Backlit LCD, Calibration Certificate Included No, Includes Meter, Batteries Installed, Test leads, Users Manual '

Manufacturer: Trerice Brand: Trerice Model: SX9140305

The Trerice SX9 “Solar Therm” is ideally suited for replacement of existing mercury-in-glass thermometers in environmentally conscious applications. It features a rugged cast aluminum case, easy to read LCD display and anadjustable-angle stem that is fully interchangeable with industrial liquid-in-glass thermometers. Also available is a bimetal type stem for applications where a digital thermometer is preferred over existing analog bimetals. The “Solar Therm” requires no external power and needs only 10 lux of illumination to operate. The unique Min/Max feature provides instant recall of minimum and maximum temperatures over a given period and is easily reset.

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC10033S

Red Spirit filled yellow back tubing thermometer's specifications approved by NIST, ANSI and ASTM. It meets NlST tolerance for accuracy. These are individually serialized and permanently marked.