Temperature & Humidity - Page 527

Manufacturer: na Brand: Unbranded*

Extra range thermal Imager for your smartphone. Perfect for outdoor use. Sometimes you need to see further?and with Seek CompactXR, you can. With its narrow 20° field of view, CompactXR has nearly twice the viewable range as Compact, making it perfect for use outdoors. Simply connect-and-detect at up to 1800 feet away. To view phone compatibility, please refer to the following link: http://www.thermal.com/supported/

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments M72 500V Insulation Meter, Continuity Meter & TRMS DMM M72  is one of four models of new MULTITEST family of portable meters, which included also M73, M74 and M75 meters, designed to perform Insulation Resistance and Continuity of earth conductors measurements according to VDE and IEC common standards on typical urban electrical installations. M72 meter also include others features as phase sequence with 1 wire method, leakage current with optional transducer clamp and a powerful DMM function for TRMS measures of voltage and current ideal for troubleshooting operations both in civil and industrial environments. Voltage and current peak measure on 1ms it's also ok for inrush current evaluation of electrical motor devices. As each model of MULTITEST family also M72 have a large LCD display for easy readings, a modern and ergonomic external case, a innovative electronic function selector for easy to use and a protection rubber holder to prevent accidental damaged.

Manufacturer: Iris Brand: Iris

Iris IRISVDA0416 Video Distribution Amplifier.

Manufacturer: Fluke Brand: Fluke Model: 5609-300-S

Secondary PRT Probe, 100 Ohm (6 X 300 mm), Spade Lugs If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than Fluke Calibration 5609-300-S Secondary PRT Probe, 100 Ohm (6 X 300 mm), and gold pins. It's short-term stability at the triple point of water is only +/-10 mK and it's 6 mm diameter lets you get accurate measurements in only 100 mm of immersion. The 5609-300-S comes with a 6 mm diameter sheath in lengths of 300mm.This probe has Inconel sheath and is made using a special manufacturing process, giving it great precision over a wide temperature range. The sensor for this probe is reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts.

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments GEO 416 Earth Ground Resistance and Earth Resistivity Tester with Internal Memory GEO416 is a innovative earth ground resistance tester designed to performing Earth Resistance measurements with 3-pole standards method typically in industrial electrical installations environments which consists of single probes and more or less wide earth networks. This meter can perform also 2-pole measure (where auxiliary metal parts are available) extremely important in civil environments where 3-pole method application is not possible for logistical reasons. The earth ground resistance tester GEO416 performs tests with a high measurement range (up to 50kOhm) with a test current at high frequency in order to consider and eliminate noise voltages disturb on installation. Earth Resistivity test measure with 4-wire method it's also very useful on preliminary calculation of earth installation dimension. A contextual help selectable by user it's available on meter for each functions. The model can save each test result inside memory and can transfer saved dates to PC through optical / USB interface with dedicated Windows software. Working Instructions Caption: Inputs ENTER/￪,￬,￩,￫ keys ESC/ key RCL/CLR key Display GO key SAVE key ON/OFF key

Manufacturer: FLIR Systems Brand: FLIR Model: FLIR i3 Color: Black and Gray

The FLIR i-Series thermal imagers improves your options with a strong line-up of fresh choices to fit the level of detail your application requires. Now with 36% higher thermal resolution than before and a wider field of view to help you image more clearly, scan more quickly, and store an entire scene in one complete picture.Features:Compact, Focus-Free, Easy-to-Use and Lightweight (13 oz)Spot measurement modeTemperature range: -4°F to 482°F (-20°C to 250°C)60 x 60 IR detector resolution (3,600 pixels)Thermal Sensitivity (N.E.T.D)

Manufacturer: Fluke Brand: Fluke

Fluke S3P-TI400 Silver Careplan 3 Year for Fluke Ti400 Thermal Imager.

Manufacturer: REED Instruments Brand: Reed Instruments Model: R2050

This entry-level thermal imaging camera features an 80 x 80 (6,400 pixels) infrared sensor that can detect temperatures between -4 to 662°F (-20 and 350°C). The R2050 is capable of displaying thermal and visual images on a vivid 2.8" LCD display and has the ability to take infrared and visual images and record video with audio (voice annotations).

Manufacturer: Fluke Brand: Fluke Model: 5609-9BND-I

Fluke 5609-9BND-I Probe, Secondary PRT, 100 OHM, 9IN 90 DEG BEND. If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: Fluke Brand: Fluke Model: 5609-9BND-S

Fluke 5609-9BND-S Probe, Secondary PRT, 100 OHM, 9IN 90 DEG BEND. If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer