Temperature & Humidity - Page 528

Manufacturer: Fluke Brand: Fluke Model: 5618B-9-S

With each probe you will receive a full NVLAP-accredited calibration report. On the report you'll get the test data and the ITS-90 calibration coefficients that you can easily input into your Fluke Calibration thermometer. The 5618B is also a great probe to use for calibrating your Fluke Calibration 9132 or 9133 infrared calibrators. In fact, these IR black body heat sources were designed to be calibrated with this type of probe. Now you can calibrate these targets in your own lab! For use from -200 °C to 500 °C (the six-inch model goes to 300 °C), you won't find a better industrial standard in this configuration than our 5618B. We recommend using the 5618B PRTs with the 1523, 1524, 1502A, 1529, or 1560 thermometer readouts.

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments HTFLEX3003 TRMS Flexible Clamp Meter 300-3000A AC with External Driver HTFLEX3003 is an innovative three-phase current transducer that combines easy use with measurement accuracy thanks to Rogowski method. Flexible clamp kit HTFLEX3003 is a 3 flexible clamps for measuring AC current based on the principle of Rogowski up to 3000A. Scales: 300 / 3000A HTFLEX3003 transducer is similar in purpose to a CT or current transformer used to measure three phase currents. Figure 1 shows the three phase current probe. The outputs are max 1V~ analogue voltages proportional to the AC currents in the conductors. The output signals are isolated form the hazardous conductor potentials and are exact replicas of the current waveforms in the conductors. The output signals are available via a 3 pin connector (see Figure 2 below for output signal pin assignment). Standards CE Mark EMC 2004/108/CE Directive LVD 2006/95/CE Directive HTFLEX3003 transducer requires two 1.5V type AA MN1500 LR6 alkaline batteries for operation. The battery compartment is accessed from the rear of the electronics enclosure. HTFLEX3003 transducer and interconnection cables use double insulation to protect the operator from possible hazardous potentials of the bus. Make sure the electronics package is well away from the bus. Each current probe is rated for Installation CAT III, Pollution Degree 2. The maximum voltage to earth rating for the transducer and cable is 1000V~. The maximum voltage to earth rating for the electronics enclosure is 30V~.

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: AX8

Support for the Ethernet IP field bus protocol (analyze, alarm and simple camera control). Support for the Modbus TCP field bus protocol (analyze, alarm and simple camera control)

Manufacturer: DALI Brand: DALI

shipping:DHL etc Resolution：uncooled 80x80 FOV/Min focuse range:23°×23°/0.1m Thermal Sensitivity：≤0.06℃@30℃ Temperature Range:-20℃-+250℃ Screen：3.2" TFT colorful LCD 240*320 Visual Camera：0.3M pixels Resolution

Manufacturer: Fluke Brand: Fluke

The Fluke 750P3IN Differential Pressure Module is part of a family of pressure models designed for the 750 and 740 series Documenting Process Calibrators and the 720 and 710 series Multifunction Process Calibrators. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. The 750P3IN Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. A urethane overmolding protects the module against shock damage in case it is dropped and is sealed against any dirt, dust, and moisture. The 750P3IN is clearly labeled for range, over-pressure and media compatibility, and all modules include a NPT, metric (BSP), and M20 adapter. Use With: Any Fluke 740 Series Calibrator Any Fluke 750 Series Calibrator Compatible 720 Series Calibrators Compatible 710 Series Calibrators

Manufacturer: SATIR Europe (Ireland) Co Ltd Brand: SATIR Model: PK-160

PK-160 SpecificationsOptical CharacteristicImage Performance FOV:           21°x28°Spatial Resolution:         4 mradThermal Sensitivity:        ≤0.08°C@30°CDetector Resolution:      160X120Image Mode:    IR/CCDVisible Pixels:     High Definition CCD 8MPLCD Display:      5.5" HD Capacitive touch screenFile Format (IR/CCD):     JPGTemperature MeasurementMeasurement Mode:       5 movable spots, auto hot/cold spot capture, isotherm analysis, line profile, circle analysis, rectangular analysisMeasurement Accuracy: ±2°C, ±2% of readingsPhysical CharacteristicEncapsulation:   IP54Standard Shock: 25GVibration Resistance:       2GOperating Temperature: 0°C - 50°CConnectivity and OS FeaturesWireless Transmission:   YESWIFI:    YESBluetooth:        YESElectronic Compass:      YESVideo Recording:           YES

Manufacturer: HT Instruments Brand: HT Instruments

Multifunction Tester According to IEC 61557 New Icon Menu Easy to use and to connect Innovative Design       One instrument for all electrical safety tests according to IEC/EN61557-1. Earth resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems, non-trip earth loop impedance measurement. Measurement of electrical parameters in single phase installations (V, A ,W,VAR,VA, PF) Continuity measurement of protective conductors. Soil resistivity. Insulation resistance measurement. Stackless earth ground resistance measurement with T2100 (optional).   MACROTESTG3 Multifunction... Multi-emotional   MACROTEST G3 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Its resistive TFT color touch-screen display, its icon menu, its help-on-line and its user-friendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester MACROTEST G3 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (provided as standard) or built in Wi-Fi interfaces with an iOS and Android smartphones or tablets . The software supplied among standard accessories allows printing testing reports. The multifunction installation tester MACROTESTG3 also drives the optional accessory IMP57 to carry out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system

Manufacturer: Fluke Brand: Fluke

SILVER CAREPLAN TI32/TIR32 3 YR

Manufacturer: Fluke Brand: Fluke

Fluke 1586A 120/C Super-DAQ Precision Temperature Scanner, Mainframe Only, 120V, Accredited Calibration. The 1586A Super-DAQ collects time-stamped precision temperature and electrical measurements for data analysis by technicians, engineers, and quality control personnel to verify process control, analyze interactive systems, ensure conformance to quality standards, or to correlate related events for R&D or troubleshooting. Measurement data and statistics can be viewed in tabular format for all active channels. With the graphing feature, up to four channels can be plotted at the same time, making it easy to quickly assess test setup and results before analyzing the data on a PC.   When configured with the DAQ-STAQ Multiplexer, the Super-DAQ has the accuracy of the best benchtop reference thermometer readouts for calibration of PRTs, RTDs, thermistors, or thermocouples. Lab efficiency can be increased when the Super-DAQ is connected to a Fluke Calibration drywell or bath and Automated Sensor Test routines are run. The 1586 is ideal for a number of applications such as thermal mapping, temperature validation, process sensor calibration, and more. These applications are found in a various industries including pharmaceutical, biotechnology, food processing, aerospace, and automotive. There are six key features that set the Super-DAQ apart from other products in its class: Best temperature measurement accuracy Flexible configuration for the factory or benchtop Multiple modes of operation Real-time graphing in color Data portability and security Automated sensor calibration 1. Best temperature measurement accuracy The 1586A Super-DAQ reads PRTs, thermocouples, and thermistors with best-in-class accuracy: PRTs ± 0.005 °C (using external DAQ-STAQ Multiplexer) Thermocouples: ± 0.5 °C (using High-Capacity Module and internal CJC) Thermistors: ± 0.002 °C 2

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments HT7051 Programmable Digital 5kV Insulation Tester HT7051 model was designed to perform professional insulation resistance measurements with test voltage programmable up to 5kVDC and wide measurement range up to 10Tohm which permits a large applications for each industrial LV environment (test on electrical machines, power transformers, electrical cables, switchboard panels, generic devices, etc...). Three different function modes are available on meter: FIX mode (fixed test voltage), ADJUST mode (programmable test voltage) and RAMP mode (programmable test voltage and duration time with up to 3 kind of selectable ramps) which permits to reach correct results in each situation. The Polarization Index (P.I) and Dielectric Absorption Ratio (D.A.R) available features are duration tests which permits to define a good behaviour of the global insulation. HT7051 meter is powered by a NiMH rechargeable battery with integrated adapter which permits to reach great performances during the measurements, it have a internal memory for saving results and a RS-232 interface for connection to PC and transfer saved measurements. All structure is fitted in a portable hard carrying case which assure safety typical of a "on field" meter.