|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $200.00 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BC7217
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BC7217
External Battery Charger, For Graphical Multimeter
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $211.02 24% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: SM-CAL1
Manufacturer: Amprobe
Brand: Amprobe
Model: SM-CAL1
|
The Amprobe SM-CAL1 is a sound meter calibrator for maintaining the accuracy of a sound level meter. It fits sound meters with microphones that have a diameter of up to 1/2 inch. It produces two fixed sound level signals, 94 decibels (dB) and 114 dB, and has an output frequency of 1,000 hertz (Hz). The calibrator operates on a 9V battery (included), and a low-battery indicator shows when the unit's batteries need to be changed. It meets European conformity (CE) directives and complies with American National Standards Institute (ANSI) and International Electrotechnical Commission (IEC) standards. The SM-CAL1 weighs 0.6 lb. (285 g), and it measures 4.9 x 1.9 x 0.5 inches (125 x 48 x 12.7) mm, H x D, where H is height, the vertical distance from the lowest to highest point, and D is diameter, the distance from left to right across the widest part of a circle).Sound meters measure sound pressure levels both to check acoustic fidelity and to verify compliance with noise pollution regulations in health and safety codes. The meters are used in a range of environments, including homes, schools, airports, automotive and machine shops, concert halls, recording studios, and hospitals. There are two classes of sound level meters. Type 1 sound meters have a wider frequency response and a tighter tolerance than type 2 sound level meters, and they are commonly used in applications that require precise measurements, such as research and law enforcement. Type 2 sound meters are less precise than type 1 meters and are used for taking general measurements, such as measuring noise levels in a machine shop. Sound level meters are weighted for frequency response according to their intended use. The most commonly used weightings are A, C, and Z. The A weighting imitates the response of the human ear to soft or moderate noise levels and can be used in most environmental noise measurement applications. The C weighting imitates the response of the human ear to loud noises and can be used in noisy environments. The Z weighting measures fla...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $214.95
Manufacturer: DIAMOND
Brand: Diamond Collection
Model: SX-600
Manufacturer: DIAMOND
Brand: Diamond Collection
Model: SX-600
The SX600 measures forward and reflected power and VSWR. Compact size makes meter useful for testing both base and mobile installations. Two directional couplers with switch and LED indicators for in-line connection of two transceivers.
Special Features:
• Illuminated meter
• Switchable r.m.s. or peak power
• Measures forward, reflected & VSWR power
• 6"W x 2"H x 4"D, 2 lbs.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $215.00
Manufacturer: Drieaz
Brand: Dri-Eaz
Manufacturer: Drieaz
Brand: Dri-Eaz
Map the migration of water in carpet and pad without straining your back. The HydroSensor II has a collapsible shaft that extends to 31" to save your knees and posture. Sensitive nickel-plated points alert you to moisture content above 17 percent. Use only on carpet and pad. Extends to 31" for use, Collapses to 21" for storage, Stainless steel construction, Nickel-plated and retractable points.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $217.50
Manufacturer: Lignomat
Brand: Lignomat USA
Model: S-4P
Manufacturer: Lignomat
Brand: Lignomat USA
Model: S-4P
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $217.69 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI935005
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI935005
|
The Hanna Instruments HI935005 K-type thermocouple digital thermometer is for use in applications requiring a broad range of temperature measurements, including furnaces, kilns, freezers, and other industrial applications. It measures temperature from -50 to 1350 degrees C (-58 to 2462 degrees F), with an accuracy of + or - 0.2% of full scale. The K-type thermocouple sensor has a broader temperature measurement range than a thermistor sensor but provides lower accuracy. The LCD screen shows the current temperature and the highest or lowest temperature reading for the session. The operator can choose to display readings in degrees Fahrenheit or Celsius. The hold function keeps a measurement on the display so it can be recorded. A K-type thermocouple probe (not included) can be connected to the input port for taking measurements. The thermometer operates on three AA batteries (included). To conserve battery life, the user can program the thermometer to automatically turn off after either 8 or 60 minutes of non-use. The display shows current battery charge at start-up, and a low-battery indicator alerts the operator and turns off the thermometer when low battery charge might affect the accuracy of readings. A waterproof casing helps protect against damage from splashes and spills.SpecificationsTemperature measurement range-50 to 1350 degrees C (-58 to 2462 degrees F)Resolution0.1 degree C, up to 199.9 degrees C; 1 degree C, outside (0.1 degree F, up to 399.9 degrees F; 1 degree F, outside)Accuracy+ or - 0.2% of full scaleTypical electromagnetic compatibility (EMC) deviation, with HI 766 probes (not included)+ or - 3 degrees C (+ or - 6 degrees F)Operating environment temperature and humidity-10 to 50 degrees C (14 to 122 degrees F); 100% maximum relative humidityPower supply1.5V AA batteries (three, included)Weight253 g (8.3 oz.)Dimensions*150 x 80 x 36 mm/5.9 x 3.1 x 1.4 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is ...
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $227.40 1% OFF
Manufacturer: JoanLab®
Brand: JoanLab®
Model: SH-4
Manufacturer: JoanLab®
Brand: JoanLab®
Model: SH-4
|
Designed by JoanLab®, this SH-4 Analog Magnetic Stirrer and Hot Plate independently controls temperature and stirring speed. The 190mm by 190mm ceramic hot plate has a 380°C maximum temperature and a 600W heating power. The magnetic stirrer can rotate 0-1600 rpm. This model is diecast and has a stretching roof cover to prevent leaking. Also included is a 380mm support stand designed to hold a digital thermometer, as well as a free 25mm stir bar. The power cord is 1.5 meters. Unit dimensions: 310mm x 190mm 125mm. Unit weight: 4 kg. Materials: Iron, Ceramic. Magnetic stirrers, also called magnetic mixers, are commonly used in medical, industrial and academic laboratories for mixing liquids. Magnetic stirrers contain built-in rotating magnetic fields. As the magnetic stirrer rotates, a magnetic stir bar, often placed in a beaker of liquid, is forced to spin quickly. Magnetic stirrers are popular because they're often faster, quieter and more sanitary and durable than motor-driven and manual stirrers. This SH-4 Magnetic Stirrer Hot Plate is sold by Fristaden Lab, an American-brand lab and scientific equipment retailer established in 2013 in Chicago, Illinois. Fristaden Lab is owned and operated by Fristaden & Company, LLC.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $229.92 1% OFF
Manufacturer: Emerson, ICP
Brand: Emerson
Manufacturer: Emerson, ICP
Brand: Emerson
GENERIC REPLACEMENT, NON-RETURNABLE
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $233.56 4% OFF
Manufacturer: Cooper-Atkins Corporation
Brand: Cooper
Model: 35140
Color: Unknown
Manufacturer: Cooper-Atkins Corporation
Brand: Cooper
Model: 35140
Color: Unknown
|
The Cooper-Atkins 35140 AquaTuff Wrap&Stow dual-scale digital type-K thermocouple temperature sensor measures temperatures from -100 to +500 degrees F (-73 to +260 degrees C), and has a 1mm reduced tip probe and reinforced cable. This system has an accuracy of + or - 0.9 degrees F (0.5 degrees C). Its probe measures 3.5" and has a 1mm tip for reduced impact. The 0.5" high LCD screen displays temperature readings. The unit operates on two AAA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. The probe's reinforced cable wraps around sensor unit for storage. It is Ingress Protection certified IPX7 for protection against immersion in water up to 1m. This temperature sensor is for use in industrial or food service environments.SpecificationsSensor typeType KTemperature range-100 to +500 degrees F (-73 to +260 degrees C)Resolution0.1 degreeAccuracy+ or - 0.9 degrees F (0.5 degrees C)LCD0.5" highIngress ProtectionIPX7CertificationsCE, WEEE, RoHS, NISTPower(2) AAA batteriesDimensions7.125 x 2.75 x 1.375 inches/ 180 x 70 x 35mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.What's in the Box?35140 AquaTuff Wrap&Stow temperature sensorProbeInstructions
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $233.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER
|
|