Temperature & Humidity - Page 664

Manufacturer: General Tools Mfg Co In Brand: General Tools Model: MMD8P

General's MMD8P Precision Multi-Species Wood Moisture Meter is ideal for measuring the moisture content of 48 specific types of wood or lumber, with temperature compensation. It features an industry first 1.54 inches yellow organic light-emitting diode (OLED) dot matrix display (128 x 64 dot) for extra clarity under outdoor light conditions, and to offer information in more vivid form. You can toggle through the 48 clearly displayed species of wood on the OLED screen and measure moisture with confidence of accuracy. Has user pre-settable selections with auto power off (APO), buzzer sound. 99 stored memory and recall. Also measure ambient temperature and humidity for background reference. Features pin type measurement. Single point calibration check block included. Uses industry leading methodology and calibration curve. Includes 1 9V battery, custom hard carrying case, user's manual and 1 year limited warranty.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: Anaheim Scientific Brand: Anaheim Scientific Model: N630

The Anaheim Scientific N630 infrared thermometer is for measuring temperature in automotive repair, laboratory, manufacturing, food safety, and heating, ventilation, and air conditioning applications. It measures temperature from -32 to 535 degrees C (-25 to 999 degrees F) with a best accuracy of + or - 2 degrees C (3 degrees F). The infrared sensor takes measurements from a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. The thermometer has a 12:1 distance-to-spot ratio, which means the measurement field measures approximately 12 feet in diameter when the target is 1 foot away. It has an adjustable emissivity to help improve measurement accuracy on a range of surface types. A built-in laser pointer helps improve aiming accuracy. The LCD screen displays the current measured temperature, the highest and lowest readings for the session, the average reading for the session, and the difference between two readings. The backlit display is readable in low light. The operator can choose to display readings in degrees C or F. The operator can set high and low temperature alarms to sound when measurements exceed or drop below the preset limits. The thermometer can record and store up to 10 points of data in its internal memory. The thermometer operates on one 9V battery (included) and it automatically turns off after 6 seconds of non-use to conserve battery life. A low-battery indicator alerts the operator when the battery needs to be replaced. It comes with a soft carrying case for transport and storage.SpecificationsTemperature measurement range-32 to 535 degrees C (-25 to 999 degrees F)Resolution0.1 degree C or FAccuracy+ or - 3 degrees C (5 degrees F) at -50 to -20 degrees C (-58 to -4 degrees F); + or - 2 degrees C (3 degrees F) at -20 to 100 degrees C (-4 to 212 degrees F)Distance-to-spot ratio12:1Emissivity range0.1 to 1.00, adjustableResponse time500 millisecondsOperating temperature and humidity0 to 50 degrees C (32 to 122 degrees F); 10 to 90% maximum relative humidityPo...

Manufacturer: Extech Brand: Extech Model: 407777

For fast and accurate wood moisture measurements on a large 1.4 LCD digital display. Style: Electrode pin style, Accuracy: ±(4%+5d at 9-24%), Display Type: LCD digital display, Case Included: Yes, Dimensions L x W x H (in.): 7 x 3 x 1, Battery Type: 9V, Resolution: 0.1%, Auto On/Off: Yes, Range Selection: 9-30%, Battery Included: Yes

Manufacturer: Dickey-John Brand: Dickey-John

Item: Grain Moisture Tester, Type: Handheld, Moisture Content: 8 to 32%, Grain Dependent, Grain Temperature: 32 Degrees to 104 Degrees F, Temp. Differential: 36 Degrees F, Display: LCD, Number of Grain Calibrations in Memory: 3, Cycle Time: 10 Sec., Ambient Temp. Range: 41 to 113 F, Ambient Humidity Range: 0 to 95%, Sample Size: 250 Grams Depending on Grain, Interface: Touch Pad, Power Source: 9V Battery, Number of Languages: 1, Includes: Instructions, Manufacturers Warranty Length: 1 Year

Manufacturer: Seek Thermal Brand: Seek Thermal Model: UQ-AAAX

CompactPRO is the most advanced thermal imaging camera designed for your smartphone. Made for iPhone and Android top models, this highly-portable thermal imaging camera features a large, 320x240 thermal sensor with high sensitivity and a wide, 32-degree field of view. Offering adjustable thermal span, level, and emissivity settings, the CompactPRO delivers unprecedented high-resolution thermal imaging and software capabilities available at this price

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-VT04-ELEC-KIT

The Fluke FLK-VT04-ELEC-KIT electrical kit includes a Fluke VT04 visual infrared thermometer, a Model 117 digital multimeter, and a Model 376 clamp meter. The VT04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees F (-10 to +250 degrees C). The thermal heat map has five levels of overlay that enable the operator to locate precisely the area of concern. The built-in digital camera takes time-lapse images and saves up to 10,000 images per gigabyte on a removable micro SD data card (4 GB card included). Images can be exported for long-term records retention or inclusion in reports using the included SmartView analysis and reporting software.The Fluke Model 117 dual-impedance digital multimeter measures true RMS- AC amps and volts, DC amps and volts, continuity, ohms, capacitance, low impedance (LoZ) capacitance, and hertz. The meter has automatic AC/DC volt selection, true RMS AC measurements for accurate measurements on non-linear loads, and minimum, maximum, and average data for recording signal fluctuations. The meter also performs a diode test and measures resistance, continuity, frequency, and capacitance. Low impedance (LoZ) measurements deliver a low impedance input to the circuit, eliminating ghost voltages and improving accuracy. The white backlit LED is suitable for use in low lighting. Non-contact voltage detection speeds measurements. The meter includes test leads, holster, one 9V battery, and instructions. The Fluke 376 true RMS AC/DC clamp meter measures 1,000 amp AC and DC current with the fixed jaw or 2,500 amp AC current with the flexible current probe. True RMS AC voltage and current measurements provide accurate readings on non-linear signals. The iFlex flexible current probe increases the measurement range to 2,500 amp AC and measures awkward-size conductors or in hard-to-reach areas. An integrated low-pass filter and signal processing provide stable readings in noisy electrical environments...

Manufacturer: Extech Instruments Brand: Extech Model: MO100 Color: green

Handy battery-operated pocket-size (7.6in.L) moisture meter with adjustable pins to detect moisture in wood and building materials.

Manufacturer: Ryobi Brand: Ryobi Model: ES3000

Factory Warranties will only be honored if this product is purchased through an Authorized Seller. Ask the seller if they are authorized before purchasing.Detect moisture levels with more confidence and functionality than ever before. RYOBI Phone Works introduces a better, smarter way to monitor and track moisture content in wood, drywall, cement, and other building materials. The innovative Phone Works mobile app and Moisture Meter device turn your smartphone into a pinned moisture meter that reads moisture content and displays the results on your phone screen. Using the free mobile app, you're able to track a wide range of moisture content between 6%- 44% and compare your results to acceptable humidity ranges based on your geographic location. The app lets you capture high-quality images, share results through email and social networks, and includes a data-charting feature that measures and plots your readings over time. Get accurate moisture measurements and smarter features with the RYOBI Phone Works Moisture Meter and Mobile App. Store the Moisture Meter and other Phone Works tools in the storage case (Sold Separately). RYOBI Phone Works Transform your phone into your smartest tool. Detects water content in wood, drywall, cement, and other building materials Displays moisture value against current location based environmental conditions Smartphone screen displays moisture content between 6%-44% Measures and plots data over time with free mobile app Optimized for iPhone (OS 6.0 or later) and most android phones (version 4.0 or later) App available on the app store and Google play Launch the Phone Works app on your smartphone before connecting the device to your phone, make sure the phone volume all the way up before starting Includes: (1)ES3000 Moisture Meter, (1) Tether Cap, and (1) AAA Battery

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61700-0800

Multi-function clocks feature thermometer and 0.1 resolution. CE approved and RoHS compliant. Each item is individually packaged with multi-language (English, French, German, Italian, Portuguese and Spanish) instructions. Requires 2 AAA batteries (included).B61700-0700 features atomic clock (most European countries), alarm, temperature trend, max/min memory, and high/low alert. B61700-0800 features temperature trend, max/min memory, and high/low alert B61700-0900 features time zone set, alarm, stopwatch and countdown B61700-1100 features atomic clock (North America), alarm, temperature trend, max/min memory and high/low alert

Manufacturer: Parallax Brand: PARALLAX Model: 29124

The Altimeter Module is a high resolution (20 cm) altimeter sensor. It will give extremely accurate, altitude, pressure, and temperature readings.